How Thick Is Balsa Wood: Common Sheet Sizes Explained
Balsa wood sheets for laser cutting and engraving in this guide state 1/16 and 1/8 inch thicknesses, with sheet sizes from 12 x 4 to 12 x 12 inches.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
20 Pack Balsa Wood Sheets, 8”x12”x1/16”9.5/10View on Amazon - 2
Balsa Wood Sheets 1/8" Thin9.5/10View on Amazon - 3
Balsa Wood, Plywood Sheet9.4/10View on Amazon - 4
12 Pack Basswood Sheets 12 x 8 x 1/13 Inch Thin9.4/10View on Amazon
A sheet of balsa wood looks simple until it arrives too thin to hold its shape or too thick to cut cleanly. The right sheet depends on the job: a surface engraving needs far less thickness than a model part that must hold together under glue. How thick is balsa wood is less about a standard size and more about matching the sheet to the job.
The balsa sheets in this guide state 1/16 and 1/8 inch thicknesses. One pack in this guide lists two figures, 1/13 inch in the title and 1/10 inch in the bullets, so check the listing before ordering.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

20 Pack Balsa Wood Sheets, 8”x12”x1/16”
A 20-pack of 1/16 in balsa sheets sized 8 x 12 in (200 x 300 mm) for crafts, model making, wood burning and laser projects.
Pros
- 20 sheets per pack for model making and craft batches
- 1/16 in (1.5 mm) thickness, cut with a utility knife per the maker
- Sanded smooth, with no splinters stated
- Listed for wood burning and laser projects
Cons
- 8 x 12 in sheets are smaller than the 12 x 12 in sheets here
- 1/16 in thickness suits thin parts and surface work
- Unfinished surface needs paint, stain or a finish
- A 20-sheet pack may be more than a single small project needs

Balsa Wood Sheets 1/8" Thin
A 5-pack of 1/8 in natural balsa sheets sized 12 x 4 in for modeling, gliders, crafts and laser work.
Pros
- 1/8 in thickness, the thickest sheet in this guide
- 100% natural balsa wood, per the maker
- 12 in sheets suit glider and model airplane parts
- Smooth, burr-free surface, ready to paint or stain
Cons
- Only 5 sheets per pack
- 4 in width limits each piece to narrow cuts
- No warranty term is stated
- Soft balsa needs careful handling when gluing

Balsa Wood, Plywood Sheet
A 10-pack of 1/16 in unfinished basswood plywood sheets sized 12 x 12 in for laser cutting, engraving and crafts.
Pros
- 12 x 12 in sheets, the largest sheet size in this guide
- 10 sheets per pack for signs, ornaments and model parts
- Polished on both sides with no burrs, per the maker
- Listed for laser cutting, engraving, burning and crafts
Cons
- 1/16 in thickness suits thin parts and surface work
- No warranty term is stated
- Unfinished surface needs stain, paint or a finish
- 12 x 12 in sheets suit machines with a bed that fits the full sheet

12 Pack Basswood Sheets 12 x 8 x 1/13 Inch Thin
A 12-pack of basswood sheets sized 12 x 8 in for crafts, laser cutting, wood burning and drawing.
Pros
- 12 sheets per pack for crafts and classroom batches
- 12 x 8 in sheets suit ornaments, door hangers and models
- Finely polished, smooth and straight with no burr, per the maker
- Listed for laser cutting, wood burning and drawing
Cons
- 12 x 8 in sheets are smaller than the 12 x 12 in sheets here
- Thin sheets suit light craft work rather than stiff model parts
- A 12 x 8 in sheet cannot cut a 12 x 12 in design
- Unfinished surface needs paint or a finish
How thick is balsa wood: the common sheet sizes
The listings in this guide state 1/16 inch and 1/8 inch sheets, plus two figures for one pack: 1/13 inch in the title and 1/10 inch in the bullets. The table below puts the stated figures side by side.
| Sheet | Thickness | Size | Pack |
|---|---|---|---|
| MIVIDE 20-Pack Balsa | 1/16 in (1.5 mm) | 8 x 12 in (200 x 300 mm) | 20 |
| Coowayze 1/8 in Balsa | 1/8 in | 12 x 4 in | 5 |
| MOWPOG 10-Pack 12×12 | 1/16 in | 12 x 12 in | 10 |
| pojah 12-Pack 12×8 | 1/13 in (title); 1/10 in (bullets) | 12 x 8 in | 12 |
The 1/16 inch sheets are the thinnest stated here, with the MIVIDE sheet stated at 1.5 mm, while the 1/8 inch Coowayze sheet (on Amazon) is the thickest stated. A thicker sheet gives a model part more body; a thinner sheet suits surface engraving and light cut parts.
Which thickness suits laser cutting and engraving
The 1/16 inch listings include true balsa from MIVIDE and basswood plywood from MOWPOG, and both list laser cutting among their uses. A 1/16 inch sheet suits surface engraving and thin cut parts, while the 1/8 inch Coowayze balsa sheet is listed for modeling, gliders and small structures.
Cutting any wood sheet on a laser needs ventilation and fire care: vent fumes outdoors or through a filter made for laser fumes, keep a suitable extinguisher within reach, and never leave a running job unattended. The guide to cutting balsa wood cleanly covers the cutting step in detail.
Match the sheet size to the machine: a 12 x 12 inch sheet needs a bed that fits it, while 12 x 4 inch boards fit smaller beds. If the laser is new, read how to choose a laser engraver before ordering blanks in bulk.
Common mistakes to avoid
- Ordering by thickness alone, without checking the sheet size and pack count.
- Assuming a title that says balsa wood ships true balsa, when the description names basswood plywood.
- Ordering a pack whose listing gives two thicknesses without asking which one ships.
- Cutting without ventilation or leaving a running laser job unattended.
- Buying a large pack before cutting a single sheet.
Balsa wood sheets for laser cutting and engraving
The thickness question ends at the cutting bed, so the packs below are the sheets that turn the measurements above into cut parts and engraved signs.
FAQ: lasers and CNC
How thick is balsa wood for laser cutting?
The balsa packs in this guide state 1/16 inch and 1/8 inch sheets for laser cutting and engraving. The basswood pojah pack lists 1/13 inch in the title and 1/10 inch in the bullets. A 1/16 inch sheet suits thin cut parts, while a 1/8 inch sheet suits model parts.
Is 1/8 inch balsa wood good for models?
The Coowayze listing states 1/8 inch natural balsa for modeling, including airplanes, boats, model railroading and miniatures, and notes the wood is easy to cut and glue.
What size balsa wood sheets can a laser cut?
The sheets in this guide measure 12 x 4 inches, 12 x 8 inches, 8 x 12 inches and 12 x 12 inches. Match the sheet to the laser bed before ordering a pack.
Can balsa wood sheets be painted or stained?
The listings here describe unfinished sheets with smooth surfaces that take paint, stain and color. The Coowayze sheets are listed as ready for painting and staining, and the MIVIDE sheets for painting, staining and marking.
Related: the engraving materials hub, how to cut balsa wood and best laser engraver for wood. Also see the best laser engraver for small business.




