Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

DTF Printer Set Up: Film, Ink and Powder

A step-by-step guide to setting up a DTF printer, from film and ink to powder and pressing, with the starter gear compared.

DTF Printer Set Up: Film, Ink and Powder
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CenDale DTF Sublimation KitCenDale DTF Sublimation Kit9.7/10View on Amazon
  2. 2Enlite Premium DTF Ink 500ML Combo PackEnlite Premium DTF Ink 500ML Combo Pack9.6/10View on Amazon
  3. 3GOZYE DTF Transfer Film and DTF Powder SetGOZYE DTF Transfer Film and DTF Powder Set9.6/10View on Amazon
  4. 4DTF Syringes, DTF Printer Cleaning Kits for AllDTF Syringes, DTF Printer Cleaning Kits for All9.5/10View on Amazon

A stack of blank shirts waits for a design that only exists on screen, and the DTF printer on the bench is the bridge between the two. DTF printer set up means loading film and ink, fitting powder to the wet print, and pressing the transfer onto fabric before the first shirt goes through the press.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives no press temperature or time figures, because the listings cited state none. Follow the settings in the printer and press manuals.

CenDale DTF Sublimation Kit

CenDale DTF Sublimation Kit

CenDale9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A DTF film and powder starter kit with 30 A4 sheets, 14 oz of powder and an 18-month warranty.

Pros

  • 30 A4 sheets, 8.3 x 11.7 in, 14 oz of powder
  • 5-layer coating, 80 to 200 um powder particles
  • 100% original image color, hot and cold peel
  • 18-month warranty, reply within 24 hours

Cons

  • Sublimation hack works only on white fabrics
  • No ink included
  • A4 size only
  • PET film is stated as non-degradable
Enlite Premium DTF Ink 500ML Combo Pack

Enlite Premium DTF Ink 500ML Combo Pack

Enlite9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A DTF ink pack with 6 bottles of 16.91 oz (500 ml) each for DX5, DX7, 5113, XP600, I3200, 4720 and TX800 printheads.

Pros

  • 6 bottles of 16.91 oz: 2 white, 1 black, 1 cyan, 1 magenta, 1 yellow
  • Fits DX5, DX7, 5113, XP600, I3200, 4720 and TX800 printheads
  • Works with six-color and eight-color models with Cadlink software
  • Water-based pigment ink, 2 gloves in the box

Cons

  • Ink only
  • No film or powder in the box
  • Check the printhead model before ordering
  • 1 year warranty
GOZYE DTF Transfer Film and DTF Powder Set

GOZYE DTF Transfer Film and DTF Powder Set

GOZYE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A DTF film and powder kit with 20 A4 sheets, 8.8 oz of powder, 45 ft of tape and 2 ruler guides.

Pros

  • 20 A4 sheets with 8.8 oz of hot melt powder
  • 45 ft of recognition tape
  • 2 T-shirt ruler guides
  • More than 50 wash times, per the maker

Cons

  • 20 sheets, fewer than the 30 in the CenDale kit
  • No ink in the box
  • Film size is A4 only
  • 8.8 oz of powder, less than the 14 oz in the CenDale kit
DTF Syringes, DTF Printer Cleaning Kits for All

DTF Syringes, DTF Printer Cleaning Kits for All

EOXMMTOT9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cleaning kit with 6 syringes of 10 ml and 6 tips for priming ink lines and clearing air.

Pros

  • 6 syringes of 10 ml, 6 tips for ink dampers
  • Pumps ink from tank to hose to dampers
  • Pumps air out of the CISS tube
  • Fits DTF, DTG and UV printers, per the maker

Cons

  • A maintenance tool only
  • No ink, film or powder in the box
  • 1 month warranty
  • 10 ml each, so larger flushes need refills

Step 1: Pick the film and powder first

Film and powder come before ink and cleaning gear, since every DTF print runs through them. The CenDale starter kit (on Amazon) in this guide holds 30 matte double-sided A4 sheets at 8.3 x 11.7 in and 14 oz of medium-particle powder. The GOZYE set holds 20 A4 sheets with 8.8 oz of hot melt powder, 45 ft of recognition tape and 2 T-shirt ruler guides.

Step 2: Load the ink

Ink is the color in the print, and DTF ink needs white in the mix so transfers work on dark fabric. The Enlite combo (on Amazon) pack in this guide holds 6 bottles of 16.91 oz (500 ml) each: 2 white, 1 black, 1 cyan, 1 magenta and 1 yellow. The maker lists printheads DX5, DX7, 5113, XP600, I3200, 4720 and TX800.

Step 3: Set up the print path

The film has to feed flat and straight, or the print lands crooked and the powder will not stick evenly. Matte film takes the ink, and the glossy reverse side keeps the sheet moving. For the full transfer workflow, see how to make a DTF transfer.

Step 4: Powder, press and peel

Powder goes on while the ink is still wet, sticks to the printed pattern, and melts into an adhesive layer under heat. The CenDale powder uses 80 to 200 um particles, and its film has a 5-layer coating, while the GOZYE set is rated by its maker for more than 50 wash times. A heat press bonds the transfer to the fabric: see the best 5 in 1 heat press guide.

Step 5: Clean the printer and keep it printing

DTF ink settles when a printer sits idle, and settled ink blocks lines and dampers. The EOXMMTOT cleaning (on Amazon) kit in this guide holds 6 syringes of 10 ml with 6 tips made to fit the ink damper, so ink can be pumped from the tank to the dampers and air out of the CISS tube. For cleaning fluids, see the best DTF printer cleaning solution guide.

The gear for a dtf printer set up

The kits below cover the gear the steps above call for: film and powder for Step 1, ink for Step 2, and syringes for Step 5.

Common mistakes to avoid

  • Loading film without checking which side takes the ink.
  • Skipping the powder step and pressing a bare print.
  • Using a sublimation hack on dark fabric.
  • Buying ink before checking the printhead list for the printer in use.

DTF printer set up: the short version

  1. Pick a film and powder kit in A4.
  2. Load ink that matches the printhead.
  3. Feed the film flat with recognition tape or stickers.
  4. Powder the wet print, press it, and peel.
  5. Prime the lines and clean between runs.

FAQ: lasers and CNC

What do I need to set up a DTF printer?

Film, ink, powder, a heat press, and a way to keep the ink lines clear: 30 A4 sheets and 14 oz of powder, 6 bottles of ink, and 6 syringes with 6 tips.

Can I use a DTF printer for sublimation?

The CenDale kit is made for a DTF and sublimation hack. With the sublimation hack, only white fabrics work, because the process has no white ink.

What fabrics work with DTF printing?

Non-treated cotton, silk, polyester, nylon and leather, with no color or fabric restrictions, per the makers.

How do I keep a DTF printer from clogging?

Prime the lines after refills and keep air out of the tubes. The syringe kit pumps ink from the tank to the dampers and air out of the CISS tube.

How long does a DTF transfer last on a shirt?

The GOZYE maker states more than 50 wash times for its transfers, with scratch and crack resistance.

Do I need a heat press for DTF printing?

Yes: the transfer needs heat and pressure to bond to fabric. See the best 5 in 1 heat press under 150 guide for press options.

Related: the DTF printer prices, A3 vs A4 DTF printers and best DTF printer ink under 60. Also see the DTF printer vs sublimation printer guide.

More buying guides

Craft Machines ·

How to Use DTF Printer: Step by Step

Print the design on DTF film with DTF ink, coat it with powder, heat-set the print and press it onto fabric: a step-by-step guide…

Craft Machines ·

Low Cost DTF Printer: What to Buy (2026)

A low cost DTF printer guide comparing print width, printhead, white ink circulation, bundle contents, ink supply and warranty terms for apparel work.

Craft Machines ·

DTF Printer Sizes: Bed Dimensions Guide

This guide covers A3 and A3+ DTF printer sizes, and the size to pick is the one whose stated print width covers your largest…