Best DTF Printer Cleaning Solution (2026): 4 Picks Compared
Four DTF printer cleaning solutions compared by volume, formula, effectiveness, kit contents, compatibility and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPrintium 500ML9.7/10View on Amazon - 2
Best KitCenDale 200ML Kit9.7/10View on Amazon - 3
Best WarrantyCenDale 100ML Kit9.6/10View on Amazon
A run of PET film transfers is due for a market stall, and the white ink has started to stripe across the print. A clogged nozzle turns a good design into a faint, lined transfer, and the best dtf printer cleaning solution dissolves the dried ink so the printhead lays down color again. This guide compares cleaning solutions by volume, formula, effectiveness, kit contents and warranty, with the Printium bottle leading because it holds the most solution and works with manual or automated cleaning.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read the affiliate disclosure.
Quick picks
- Best Overall Printium 500ML: 500ml of water-based solution for manual or automated cleaning, with overnight soaking for stubborn clogs. Check price on Amazon
- Best Kit CenDale 200ML Kit: A 200ml kit with a 6X formula, two nozzles, a syringe, a tube and six cotton swabs. Check price on Amazon
- Best Warranty CenDale 100ML Kit: A 100ml kit with an 18-month warranty, two nozzles and a syringe for Epson and DTF printheads. Check price on Amazon
Machines on the list

Printium DTF Printhead Cleaning Solution 16.9 fl
A 500ml bottle of water-based, non-corrosive cleaning solution for manual or automated cleaning of DTF and DTG printheads.
Pros
- 500ml bottle, the largest volume here
- Water-based, odorless, non-toxic and residue-free
- Works with syringes, capping stations, swabs or automatic systems
- Safe for nozzle plates, dampers, capping stations and ink lines
Cons
- No warranty term is stated
- No syringe, nozzles or swabs included
- No effectiveness percentage is stated
- No stated response time for support

CenDale 6X Powerful DTF Cleaning Kit
A 200ml cleaning kit with a 6X enzyme formula, two nozzles, a syringe, a tube and six cotton swabs for DTF and DTG printheads.
Pros
- 6X formula, 95%+ effective cleaning power per the listing
- Dissolves crystallized white ink and dried nozzles
- Full kit: syringe, tube, two nozzles, six swabs, gloves
- Water-based, non-toxic, non-corrosive and low-odor
Cons
- No warranty term is stated
- 200ml, less than the 500ml Printium bottle
- 6X effectiveness is the maker's comparison to standard formulas
- No stated compatibility with TX800 or DX7

CenDale Premium DTF Printhead Cleaning Solution
A 100ml cleaning kit with an improved enzyme formula, two nozzles, a syringe and an 18-month warranty for DTF and DTG printheads.
Pros
- 18-month warranty, the only stated warranty term among the kits here except Yitentek
- Active enzymes dissolve dry and wet DTF and DTG ink
- Two nozzles precisely sized to prevent leakage
- Eco-friendly green raw materials that do not harm aquatic life
Cons
- 100ml, the smallest volume here
- 85% to 95% effectiveness, below the 95%+ of the 200ml kit
- Four cotton swabs, fewer than the six in the 200ml kit
- Caution: avoid spilling the solution onto the motherboard and cables

Yitentek DTF Printhead Cleaning Solution
A 100ml cleaning kit with an improved enzyme formula, two nozzles, a syringe and a 2-year manufacturer warranty for DTF and DTG printheads.
Pros
- 2-year manufacturer warranty
- Active enzymes dissolve dry and wet inks
- Two nozzles fit different ink ports to prevent leakage
- Eco-friendly green materials, safe for aquatic life
Cons
- 100ml, the smallest volume here
- 85% to 95% effectiveness, below the 95%+ of the 200ML kit
- Compatibility list names fewer models than the CenDale listings
- Four cotton swabs, fewer than the six in the 200ml kit
Other machines to compare
Printium DTF Printhead Care Solution 33.8 fl ozCheck price on Amazon
MagicPrint4U DTF Cleaning Solution 1000ml for Printhead WetCheck price on Amazon
DTG Pre-Treatment SolutionCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Formula | Effectiveness | Kit | Warranty |
|---|---|---|---|---|---|---|
| Printium 500ML | 9.7/10 | 500 ml | Water-based, non-corrosive | Not stated | Solution only | Not stated |
| CenDale 200ML Kit | 9.7/10 | 200 ml | Enzyme blend, 6X | 95%+ | Syringe, 2 nozzles, 6 swabs | Not stated |
| CenDale 100ML Kit | 9.6/10 | 100 ml | Enzyme, improved | 85%-95% | Syringe, 2 nozzles, 4 swabs | 18 months |
| Yitentek 100ML Kit | 9.6/10 | 100 ml | Enzyme, improved | 85%-95% | Syringe, 2 nozzles, 4 swabs | 2 years |
These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026). Two listings state a warranty term, and none names a safety certification, so all four score zero for safety.
How the picks were scored
Each solution is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are published in the site scoring guide.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Printium 500ML | 9.7 | 33 | 22 | 22 | n/a | 0 |
| CenDale 200ML Kit | 9.7 | 33 | 21 | 21 | n/a | 0 |
| CenDale 100ML Kit | 9.6 | 29 | 20 | 20 | n/a | 1 |
| Yitentek 100ML Kit | 9.6 | 28 | 20 | 19 | n/a | 2 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
What the listings tell you, and what they leave out
Two listings state a warranty term, an 18-month warranty on the CenDale 100ml kit and a 2-year manufacturer warranty on the Yitentek kit, while the Printium bottle and the CenDale 200ml kit state no warranty term. Two listings state an effectiveness percentage: the CenDale 200ml kit claims 95%+ effective cleaning, and the CenDale 100ml kit and the Yitentek kit claim 85% to 95% effectiveness. Only the Printium listing states a volume above 200ml, with a 500ml bottle. Both CenDale kits share the part number DTF Cleaner 01, and both list the same kit contents apart from the swab count, six in the 200ml kit and four in the 100ml kit. None of the four listings names a safety certification, and none states a shelf life.
Buying guide: the best dtf printer cleaning solution
Kit or bottle alone
A kit brings the tools for a manual clean: a 10ml precision syringe, a 10cm cleaning tube, a yellow nozzle, a white nozzle, two L-shaped tubes, cotton swabs, gloves and instructions. The CenDale 100ml kit and the Yitentek kit include four cotton swabs, while the CenDale 200ml kit includes six. The Printium bottle is solution only, with no syringe, nozzles or swabs, so it suits a printer that already has cleaning tools or an automatic cleaning system.
Formula: enzymes and water-based
Three of the four solutions use an enzyme formula. The CenDale kits and the Yitentek kit use active enzymes that dissolve both dry and wet DTF and DTG ink, and the CenDale 200ml kit uses an advanced enzyme blend for crystallized white ink. The Printium solution is a water-based formula that is odorless, non-toxic and residue-free, and it leaves no residue on nozzle plates, dampers, capping stations and ink lines. The CenDale 200ml kit is water-based too, and it is non-toxic, non-corrosive and low-odor.
Effectiveness figures
Effectiveness is the share of clogs the maker says the solution clears, and the figures here are the maker’s claims. The CenDale 200ml kit claims 95%+ effective cleaning power, while the CenDale 100ml kit and the Yitentek kit claim 85% to 95% effectiveness. The Printium listing states no effectiveness percentage, and instead describes a fast-acting formula that penetrates and dissolves pigment buildup. All four claim to resolve the same problems: incomplete patterns, stripes, color changes and lines from blocked printheads or ink residue.
Compatibility: printhead models
All four solutions state compatibility with DTF and DTG printers, and all four name Epson models. The CenDale kits list L1800, XP-15000, ET-8550, XP-600, R1390 and L805, plus modified print systems such as i3200, DX5, XP600, 4720, P600, P800, 7880, 7800, P6000, 3880 and 3800. The Printium bottle adds TX800, DX7, I1600 and L800 to that range, and it states compatibility with desktop, converted and wide-format DTF systems. The Yitentek title names ET8550, L1800, XP15000, R1390, XP600, 4720, i3200, i1600 and 5113, while its bullets name only L1800 and XP-15000 and more. Check the model list against the printhead before ordering.
Volume: 100ml, 200ml or 500ml
Volume decides how many cleans a bottle covers. The CenDale 100ml kit and the Yitentek kit hold 100ml, the CenDale 200ml kit holds 200ml, and the Printium bottle holds 500ml. The Printium listing calls its 500ml bottle a convenient size for small studios, home-based printers and mobile setups, and it suggests daily or weekly use to prevent clogs before they develop. A kit suits a printer that needs a full clean with tools, while a large bottle suits a studio that cleans often.
Cleaning solution is for printheads and ink lines, not for circuit boards. The CenDale and Yitentek listings warn to avoid spilling the solution onto the motherboard and cables, and the nozzles in the kits are sized to fit the ink ports and prevent leakage. The Printium formula is non-toxic, non-corrosive and odorless, and the kits include gloves. Keep the solution away from the printer circuit board and printhead contacts, and follow the included instructions.
Project Match
- PET film heat transfers and garment applications: Printium, which the listing says keeps prints vibrant, sharp and streak-free for PET film heat transfers and all garment applications.
- Daily maintenance and emergency recovery: CenDale 200ml kit, which the listing describes as a cleaner for daily maintenance and emergency recovery.
- Printers left idle, heavy white ink use and high-frequency printing: CenDale 200ml kit, which the listing says works well for printers left idle, heavy white ink usage and high-frequency printing.
- Small studios, home-based printers and mobile setups: Printium, which the listing calls a convenient bottle size for small studios, home-based printers and mobile setups.
- DTF and DTG printing systems in general: all four picks, since each listing states compatibility with DTF and DTG printers.
FAQ: lasers and CNC
How do you clean a clogged DTF printer?
Use cleaning solution with a syringe and the nozzles in the kit to flush the printhead, or run it through a capping station or an automatic cleaning system. For stubborn dried ink, the Printium listing suggests overnight soaking, and the CenDale and Yitentek kits include step-by-step instructions. Avoid spilling the solution onto the motherboard and cables.
How often should a DTF printhead be cleaned?
Clean on a routine, not only when clogs appear. The Printium listing suggests daily or weekly use to prevent clogs before they develop, and the CenDale 200ml kit is described as a cleaner for daily maintenance. A printer left idle or running heavy white ink needs cleaning more often.
Does cleaning solution work on all DTF printheads?
All four solutions state compatibility with DTF and DTG printers, and all four name Epson models such as L1800, XP-15000, ET-8550, XP-600 and R1390. The Printium bottle adds TX800, DX7 and I1600. Check the model list in the listing against the printhead before ordering.
What is in a DTF cleaning kit?
The CenDale and Yitentek kits include a 10ml precision syringe, a 10cm cleaning tube, a yellow nozzle, a white nozzle, two L-shaped tubes, cotton swabs, gloves and instructions. The CenDale 200ml kit includes six cotton swabs, while the CenDale 100ml kit and the Yitentek kit include four. The Printium bottle is solution only, with no tools included.
Can cleaning solution damage a printhead?
The formulas here state they are safe for printheads: the Printium solution is non-corrosive and residue-free, and the CenDale 200ml kit is non-toxic, non-corrosive and low-odor. The kits use nozzles sized to fit the ink ports and prevent leakage, which the listings say protects the circuit board and printhead. Follow the included instructions and keep the solution off the motherboard and cables.
Related: the craft machines hub, the best DTF powder, the best DTF printer bundles and the best DTF printer ink.




