Best 5 in 1 Heat Press (2026): 4 Combo Picks for Shirts, Mugs and More
5 in 1 heat presses with 12x15 and 15x15 platens, hat, mug, tumbler and plate attachments, compared by platen size, temperature range, safety features and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLeomru 15×15 5-in-19.7/10View on Amazon - 2
Best for Big ShirtsSlendor 15×15 5-in-19.6/10View on Amazon - 3
Best 12×15 With Tumbler PressPlanetFlame 12×159.5/10View on Amazon - 4
Best Double InsulationVEVOR 12×15 5-in-19.5/10View on Amazon
A custom T-shirt, a printed mug and a capped hat all start the same way: a design pressed onto a blank with steady heat and even pressure. A best 5 in 1 heat press does that work with one machine, swapping a flat platen for a hat press, a mug press, a tumbler press and plate presses as the project changes. This guide compares 4 combo presses on the details that decide what you can make: platen size, attachments, temperature and timer ranges, safety features and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Leomru 15×15 5-in-1: A 15×15 platen, dual-tube heating, a slide-out base, swing-away arm and a stated 2 year warranty. Check price on Amazon
- Best for Big Shirts Slendor 15×15 5-in-1: A 15×15 platen with a 0-482°F range, automatic heating stop and a stated 2 year warranty. Check price on Amazon
- Best 12×15 With Tumbler Press PlanetFlame 12×15: A stated 1000W, a 30oz tumbler press and a 365 day warranty in the spec table. Check price on Amazon
- Best Double Insulation VEVOR 12×15 5-in-1: Double insulation keeps the surface at 122°F–158°F while the platen works above 410°F. Check price on Amazon
Machines on the list

Leomru 5 in 1 Heat Press Machine
A 15x15 swing-away press with dual-tube heating, a slide-out base, a 30oz tumbler press and a stated 2 year warranty.
Pros
- 15x15 platen with dual-tube heating for even heat across the surface
- 360-degree swing-away arm plus a slide-out base for safer loading
- Hat, 30oz tumbler and 5 in and 6 in plate presses in the box
- Two Teflon sheets included, plus a counting function and a stated 2 year warranty
Cons
- No power figure in the listing, so input wattage is not stated
- At 38.5 pounds it is heavy to move, and the listing gives no handle or carry detail
- The temperature starts at 30°F, higher than the 0°F start on two rivals
- The control box claims a second generation design with no detail on what changed

Slendor 15x15 inch 5 in 1 Swing Away Heat Press
A 15x15 swing-away press with a 0-482°F range, a 30oz tumbler press and a stated 2 year warranty.
Pros
- 15x15 platen, the joint largest work area in this guide
- Temperature range of 0-482°F (0-250°C) with a timer up to 999 seconds
- 360° swing-away arm with adjustable pressure and a detachable lower platform
- Automatic heating stop and alarm notification, plus a stated 2 year warranty
Cons
- No power figure in the listing, so input wattage is not stated
- At 43.21 pounds it is the heaviest press in this guide
- The listing gives no plate sizes beyond 5 in and 6 in, and no hat press size
- No Teflon sheet or protective sheet is listed in the box

PlanetFlame Heat Press Machine 12x15 Inch
A 12x15 swing-away press with a stated 1000W, a 30oz tumbler press and a 365 day warranty.
Pros
- Stated 1000W power and 110V, the only power figure in this guide
- 30oz tumbler press, plus a 6.7 in x 3.3 in hat press and 5 in and 6 in plate presses
- 360° swing-away plate and an adjustable pressure knob
- Teflon-coated heating plate and a 365 day warranty in the spec table
Cons
- 12x15 platen is smaller than the 15x15 platens on the two leaders
- The maker claims 18 years of experience with no detail to check it against
- No weight in the listing

VEVOR Heat Press Machine 12 x 15 in 5-in-1 Combo
A 12 x 15 in combo press with an etched heating plate, double insulation and a 32°F–450°F range, with no warranty term stated.
Pros
- Etched heating plate the maker says gives more even heat distribution
- Double insulation keeps the surface at 122°F–158°F while working above 410°F
- Digital control with a 32°F–450°F range and a 0–999 second timer
- Hat, 11 oz cup and 8 in and 10 in plate attachments for shirts, mugs, hats and plates
Cons
- No warranty term in the listing
- 12 x 15 in platen is smaller than the 15x15 platens on the two leaders
- Temperature starts at 32°F, higher than the 0°F start on two rivals
- The listing states no power figure, so input wattage is not stated
Other machines to compare
10 Pack PTFE Sheet for Heat PressCheck price on Amazon
White PTFE Sheet for Heat PressCheck price on Amazon
YRYM HT PTFE Teflon Sheets for Heat Press- 3 Pack 12"x16"Check price on Amazon
HTVRONT Mini Heat Press MachineCheck price on Amazon
2 Rolls 10mm X 33m 108ft Heat TapeCheck price on Amazon
TransOurDream PTFE Teflon SheetsCheck price on Amazon
Specs compared
| Model | HQ Score | Platen | Attachments | Temperature range | Timer range | Safety features | Warranty |
|---|---|---|---|---|---|---|---|
| Leomru 15×15 5-in-1 | 9.7/10 | 15×15 in | Hat, 30oz tumbler, 5 in and 6 in plates | 30-450 °F | 0-999s | Teflon coating, auto shut-off on overheat | 2 years |
| Slendor 15×15 5-in-1 | 9.6/10 | 15×15 in | Hat, 30oz tumbler, 5 in and 6 in plates | 0-482°F (0-250°C) | Up to 999 seconds | Swing-away arm, automatic heating stop | 2 years |
| PlanetFlame 12×15 | 9.5/10 | 12×15 in | Hat, 30oz tumbler, 5 in and 6 in plates | 0-482℉ | 0-999s | Teflon-coated plate, swing-away arm | 365 days |
| VEVOR 12×15 5-in-1 | 9.5/10 | 12 x 15 in | Hat, 11 oz cup, 8 in and 10 in plates | 32°F–450°F (0°C–232°C) | 0–999 seconds | Double insulation | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Platen is the flat pressing area, and attachments are the extra presses in the box.
What the listings tell you, and what they leave out
Two of the 4 listings state a 2 year warranty, one states a 365 day warranty, and one states no warranty term at all. Only one states a power figure, the PlanetFlame at 1000W. Every listing states a temperature range and a timer range, and every one swings the heating plate away from the work area.
Read the attachment claims with care. The PlanetFlame tumbler bullet says one attachment presses two 11/15oz mugs and one 20oz/30oz tumbler at the same time without explaining how, and the Leomru listing says the temperature holds steady once the preset time is reached, which reads oddly next to a timer that counts down. Treat every press here as a hot surface, and let it cool before changing attachments.
How to choose the best 5 in 1 heat press
Platen size
The flat platen sets the largest design you can press in one pass. The 12×15 platens on the VEVOR and PlanetFlame cover standard shirt designs, while the 15×15 platens on the Leomru and Slendor leave room for larger prints on shirts and sweatshirts.
Attachments
Every press here is a 5 in 1 set: a flat platen plus a hat press, a mug or tumbler press and plate presses. The VEVOR lists an 11 oz cup pad and 8 in and 10 in plates, the PlanetFlame lists a 6.7 in x 3.3 in hat press and a 30oz tumbler press, and the Leomru and Slendor list a 30oz tumbler press with 5 in and 6 in plates. The PlanetFlame listing says its tumbler attachment handles 20oz and 30oz tumblers.
Temperature and timer
Temperature range and timer range decide which transfer materials you can run. The VEVOR runs 32°F–450°F, the Leomru runs 30-450 °F, and the PlanetFlame and Slendor run 0-482°F, with the Slendor also stating 0-250°C. Every press here times to 999 seconds. Set the temperature and time the transfer material calls for, and check the listing for the range before you buy.
Swing-away and slide-out
Every press here moves the hot plate away from the work area. The VEVOR relies on double insulation to keep its surface cooler, while the others swing the plate aside on a 360° arm, and the Leomru adds a slide-out base so the shirt loads away from the heat. An adjustable pressure knob appears on the PlanetFlame, Leomru and Slendor listings, letting the press adapt to thicker materials.
What a heat press will not do
A heat press applies heat and pressure to a transfer; it does not print the design or cut the material. The PlanetFlame listing names HTV, DTF film and sublimation paper. Plan the printer or cutter for the artwork separately.
Project Match
- T-shirts and sweatshirts: the Leomru and Slendor with 15×15 platens, or the VEVOR and PlanetFlame with 12×15 platens.
- Mugs and tumblers: the PlanetFlame, Leomru and Slendor with a 30oz tumbler press, or the VEVOR with an 11 oz cup pad.
- Hats and caps: every press here lists a hat press; the PlanetFlame states 6.7 in x 3.3 in and the Leomru states 5.5 in x 3 in.
- Plates: every press here lists plate presses; the VEVOR lists 8 in and 10 in plates, and the others list 5 in and 6 in plates.
- Pillowcases, bags and tiles: the VEVOR lists pillowcases, the PlanetFlame lists bags and ceramic tiles, and the Leomru lists canvas bags and pillowcases.
How the scores add up
Each machine is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Leomru 15×15 5-in-1 | 9.7 | 30 | 22 | 21 | 7 | 3 |
| Slendor 15×15 5-in-1 | 9.6 | 29 | 21 | 20 | 6 | 3 |
| PlanetFlame 12×15 | 9.5 | 28 | 20 | 20 | 5 | 2 |
| VEVOR 12×15 5-in-1 | 9.5 | 27 | 20 | 19 | 5 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What does 5 in 1 mean on a heat press?
It means one machine that presses flat items and swaps in a hat press, a mug or tumbler press and plate presses. The VEVOR pairs its flat platen with an 11 oz cup pad and 8 in and 10 in plates, and the PlanetFlame, Leomru and Slendor pair theirs with a 30oz tumbler press and 5 in and 6 in plates.
What size heat press do I need for T-shirts?
A 12×15 platen covers standard shirt designs, and the VEVOR and PlanetFlame presses here use one. A 15×15 platen leaves room for larger prints, and the Leomru and Slendor presses here use one.
How hot does a 5 in 1 heat press get?
The VEVOR and Leomru state a top temperature of 450°F, and the PlanetFlame and Slendor state 482°F, with the Slendor also stating 250°C. Set the temperature the transfer material calls for.
Can a heat press print on mugs and tumblers?
Yes, with the right attachment. The VEVOR lists an 11 oz cup heating pad, and the PlanetFlame, Leomru and Slendor list a 30oz tumbler press. The PlanetFlame listing says its tumbler attachment also handles 20oz tumblers.
Do these heat presses come with a warranty?
The Leomru and Slendor listings state a 2 year warranty, and the PlanetFlame spec table states a 365 day warranty. The VEVOR listing states no warranty term, so ask the seller before you buy.
Related: the craft machines hub, heat presses and sublimation, and our heat press for beginners guide. Also see our best 20 oz tumbler heat press, best teflon sheet for heat press, 12×12 vs 15×15 heat press, laser engraver vs heat press and hat press vs flat heat press.




