Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 5 in 1 Heat Press Under 150 (2026): 4 Combo Presses Compared

Four 5 in 1 swing-away heat presses under 150 compared by platen size, temperature range, timer, attachments and warranty.

Best 5 in 1 Heat Press Under 150 (2026): 4 Combo Presses Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Slendor 12×15 Heat PressBest OverallSlendor 12×15 Heat Press9.7/10View on Amazon
  2. 2Topdeep 15×12 Heat PressBest Tumbler PressTopdeep 15×12 Heat Press9.6/10View on Amazon
  3. 3VEVOR 12×15 Heat PressAlso ListedVEVOR 12×15 Heat Press9.6/10View on Amazon

A stack of plain T-shirts, a box of blank tumblers and a market stall to fill: a swing-away heat press turns those blanks into products to sell. The best 5 in 1 heat press under 150 is a swing-away press with a platen big enough for shirts, attachments for tumblers, hats and plates, and controls that hold temperature and time. This guide compares four 5 in 1 presses by platen size, temperature range, timer, attachments and warranty.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Slendor 12×15 Heat Press: 12 by 15 inch platen, 0 to 482 degrees Fahrenheit, 0 to 999 second timer, auto shut-off and a 2 year warranty. Check price on Amazon
  • Best Tumbler Press Topdeep 15×12 Heat Press: 30 ounce tumbler press with a 10.6 inch heating attachment for 11, 16, 20 and 30 ounce tumblers, plus hat and plate presses. Check price on Amazon
  • Also Listed VEVOR 12×15 Heat Press: 12 by 15 inch 5 in 1 swing-away press for T-shirts, hats, mugs and plates, with digital controls. Check price on Amazon

Machines on the list

Slendor 12x15 Inch 5 in 1 Swing Away Heat Press

Slendor 12x15 Inch 5 in 1 Swing Away Heat Press

Slendor9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 by 15 inch 5 in 1 swing-away heat press with a Teflon-coated cast aluminum plate, a 0 to 482 degree Fahrenheit range, a 0 to 999 second timer, auto shut-off and a 2 year warranty.

Pros

  • 12 by 15 inch Teflon-coated cast aluminum plate
  • Temperature range 0 to 482 degrees Fahrenheit
  • Timer 0 to 999 seconds with audible alarm
  • Auto shut-off and a built-in counter for batch work

Cons

  • 36.59 lb to move and store
  • No wattage stated
  • No mug or tumbler press size stated
  • Pink color only
Topdeep Pro Heat Press 15x12 Inch

Topdeep Pro Heat Press 15x12 Inch

Topdeep9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 by 12 inch 5 in 1 swing-away heat press with a 30 ounce tumbler press, a 30 to 450 degree Fahrenheit range, a 0 to 999 second timer and a 2 year warranty.

Pros

  • 30 ounce tumbler press with 10.6 inch heating attachment
  • Tumbler diameter range 2.65 to 3.4 inches for 11 to 30 ounce tumblers
  • Temperature range 30 to 450 degrees Fahrenheit
  • Die-cast aluminum plate with non-stick Teflon coating

Cons

  • No wattage stated
  • No weight stated
  • No auto shut-off stated
  • Plate presses are 5 and 6 inches only
Slendor 12x15 Inch 5 in 1 Swing Away Heat Press

Slendor 12x15 Inch 5 in 1 Swing Away Heat Press

Slendor9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12x15 inch 5-in-1 swing-away heat press with hat, 30 oz tumbler and plate attachments.

Pros

  • 5-in-1 attachments for shirts, hats, tumblers, plates
  • 0-482°F (0-250°C), 0-999 seconds
  • 360-degree swing-away moves the element aside
  • 2 years warranty stated

Cons

  • Heavier than the pink listing at 33.0 pounds
  • Tumbler attachment length listed as 10.6, no unit stated
  • Flat platen smaller than 15x15 listings
  • Counting function suits batch work
VEVOR Heat Press Machine 12"x15" 5 in 1 360° Swing

VEVOR Heat Press Machine 12"x15" 5 in 1 360° Swing

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Swing-away 5-in-1 combo with a 12x15 inch platen, hat, mug and plate presses, a dual LCD display and a pressure knob, for shirts, hats, mugs and plates.

Pros

  • 5-in-1 combo with hat, mug and plate presses
  • Temperature range of 0-450 degree F with a 0-999s timer
  • Dual LCD display with a pressure adjustment knob
  • Over-heat protection with a built-in circuit breaker

Cons

  • Warranty description states NO
  • No auto shut-off time is stated
  • No counting or preset mode function is stated
  • Machine size of 20.0 Inches x 18.0 Inches x 19.0 Inches needs storage space

Other machines to compare

Specs compared

Model HQ Score Platen Temp range Timer Attachments Warranty
Slendor 12×15 Heat Press 9.7/10 12×15 in 0-482°F 0-999 s Shirt, mug, hat, plate 2 years
Topdeep 15×12 Heat Press 9.6/10 15×12 in 30-450°F 0-999 s Shirt, tumbler, hat, 2 plates 2 years
Slendor 12×15 Press 9.6/10 12×15 in Not stated Not stated T-shirts, tumblers, hats, plates Not stated
VEVOR 12×15 Heat Press 9.6/10 12×15 in Not stated Not stated T-shirts, hats, mugs, plates Not stated

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

What the heat press listings tell you

Four heat press listings were compared. Two state a 2 year warranty, two give only a title with no bullets or specs, and only two state a temperature range and a timer. Read the parts list, not just the title.

Buying guide: best 5 in 1 heat press under 150

Platen size

A 12 by 15 inch platen covers most shirt designs, and both full-data presses here use that size. The Slendor and Topdeep platens are 12 by 15 and 15 by 12 inches, the same area turned sideways. Check the design size against the platen before you buy, since the platen sets the largest transfer you can press in one go.

Temperature and time

The Slendor runs from 0 to 482 degrees Fahrenheit and the Topdeep from 30 to 450 degrees Fahrenheit, both to 250 degrees Celsius, with a timer to 999 seconds. Set the temperature and time the transfer maker states for the material, and use the preset modes to repeat a job without re-entering the numbers.

Attachments

A 5 in 1 kit swaps the flat press for a mug, hat or plate press. The Topdeep kit lists a 30 ounce tumbler press with a 10.6 inch heating attachment for tumblers 2.65 to 3.4 inches in diameter, plus a hat press and 5 and 6 inch plate presses. The Slendor lists shirt, mug, hat and plate attachments. Count the attachments you will actually use before you count the pieces in the kit.

Swing-away design

All four presses here swing the plate aside on a 360 degree rotation, so you can lay the shirt flat without reaching under a hot plate. The Slendor and Topdeep add a bottom guide rail and an adjustable pressure knob for materials of different thicknesses. The swing-away design needs room for the plate to move aside, so check the bench space around the press.

Warranty

Two of the four presses state a 2 year warranty, and the other two state no warranty term. A stated warranty term lets you compare the makers; an unstated one does not. Read the warranty line in the listing before you buy, since the term is part of the value.

Heat press safety

The platen runs hot enough to burn skin on contact. Keep hands clear of the plate, use the swing-away handle to move it aside, and let the press cool before changing attachments. Work in a ventilated space when pressing vinyl and sublimation transfers.

Project Match

Project Slendor 12×15 Heat Press Topdeep 15×12 Heat Press Slendor 12×15 Press VEVOR 12×15 Heat Press
T-shirts Yes Yes Yes Yes
Tumblers 30 oz 30 oz 30 oz Not stated
Hats and caps Yes Yes Yes Yes
Plates Yes 5 and 6 in Yes Yes
Mugs Yes Straight mugs Not stated Yes

How the scores add up

Each press is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For heat presses, safety points come from named features such as auto shut-off and a swing-away design that moves the plate aside.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Slendor 12×15 Heat Press 9.7 30 22 21 5 3
Topdeep 15×12 Heat Press 9.6 30 22 21 3 3

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

What does 5 in 1 mean on a heat press?

It means the press comes with five pieces: a flat press for shirts plus attachments for mugs, hats and plates. The Topdeep kit lists a 15 by 12 inch press, a hat press, a 30 ounce tumbler press and 5 and 6 inch plate presses, and the Slendor lists shirt, mug, hat and plate attachments.

What size heat press do I need for T-shirts?

A 12 by 15 inch platen covers most shirt designs, and all four presses here use a 12 by 15 or 15 by 12 inch platen. Check the design size against the platen before you buy, since the platen sets the largest transfer you can press in one go.

How hot does a heat press get?

The Slendor runs from 0 to 482 degrees Fahrenheit and the Topdeep from 30 to 450 degrees Fahrenheit, both to 250 degrees Celsius. The two title-only listings state no temperature range. Set the temperature the transfer maker states for the material.

Do I need a swing-away heat press?

A swing-away press moves the hot plate aside so you can lay the shirt flat without reaching under it. All four presses here use a swing-away design with a 360 degree rotation, so the plate clears the work area while you load the shirt.

Can a heat press do tumblers and mugs?

Yes, with the right attachment. The Topdeep kit includes a 30 ounce tumbler press for tumblers 2.65 to 3.4 inches in diameter, fitting 11, 16, 20 and 30 ounce skinny tumblers and straight mugs. The Slendor lists a mug attachment, and the VEVOR lists mugs. Check the attachment size against the tumbler or mug before you buy.

Related: the best 5 in 1 heat press, the best 20 oz tumbler heat press, the sublimation vs HTV for shirts, the heat presses hub and the best T-shirt heat press machine. Also see our mug press vs tumbler press. Also see our best heat transfer paper.

More buying guides

Heat Presses and Sublimation ·

Best Heat Press for Shirts and Hoodies (2026)

Heat presses for shirts and hoodies compared by stated platen size, pressure adjustment, heating design, controls and warranty, from a 15 x 15 in…

Heat Presses and Sublimation ·

Best Sublimation Cup Heat Press (2026)

Four sublimation cup heat presses for tumblers, mugs and caps, compared by cup size, temperature range, automatic features and what each listing states about…