Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Make a DTF Transfer: A Step-by-Step Guide

Print the design on PET film, add hot-melt powder, melt it, then press and peel: a plain guide to making a DTF transfer, with 4 films compared.

How to Make a DTF Transfer: A Step-by-Step Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1GOZYE Premium DTF Transfer Film RollGOZYE Premium DTF Transfer Film Roll9.7/10View on Amazon
  2. 2SHYXEN Instant Peel DTF Transfer Film RollSHYXEN Instant Peel DTF Transfer Film Roll9.6/10View on Amazon
  3. 3Procolored DTF Transfer Film Roll 13" x 328ftProcolored DTF Transfer Film Roll 13" x 328ft9.6/10View on Amazon
  4. 4Colorfairy DTF Transfer Film 13" x 19"Colorfairy DTF Transfer Film 13" x 19"9.5/10View on Amazon

How to make a DTF transfer comes down to a short chain: print a design on coated PET film, dust it with hot-melt powder, melt the powder into the ink, then press the film onto fabric and peel it away. The film carries the design, the powder becomes the adhesive, and the heat press supplies the warmth and pressure that bond the print to the shirt. The steps below follow that chain in order, with the film choices that handle each part of the job.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

GOZYE Premium DTF Transfer Film Roll

GOZYE Premium DTF Transfer Film Roll

GOZYE9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13 in x 328 ft roll of dual-sided matte DTF film with a 5-layer coating and hot and cold peel.

Pros

  • 5-layer coating with 3 coats on the front and 2 on the back for strong ink absorption
  • Hot and cold peel, so a hot peel comes off right after pressing with no waiting time
  • Anti-static coating on the back keeps powder off non-design areas
  • Frosted non-slip coating keeps the film from sticking in the printer

Cons

  • Press time of 10 to 15 seconds is longer than the 6 to 10 seconds Colorfairy states
  • No stated film thickness in the listing
  • No stated wash guidance in the listing
  • Roll only; no sheet pack in this listing
SHYXEN Instant Peel DTF Transfer Film Roll

SHYXEN Instant Peel DTF Transfer Film Roll

Shyxen9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13 in x 328 ft roll of dual-sided matte PET film with instant peel and a 75μm coating.

Pros

  • Instant peel within 2 seconds after pressing for faster production
  • 75μm dual-sided coating with strong ink absorption
  • No fabric pretreatment required
  • Works on cotton, denim, leather, spandex, nylon, canvas and polyester

Cons

  • Temperature is stated as 140-160°C with no Fahrenheit figure in the listing
  • No stated wash count; the listing says only 'multiple washes'
  • Roll only; no sheet pack in this listing
Procolored DTF Transfer Film Roll 13" x 328ft

Procolored DTF Transfer Film Roll 13" x 328ft

Procolored9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13 in x 328 ft roll of dual-sided matte PET film with hot and cold peel.

Pros

  • Hot and cold peel for flexible pressing
  • Dual-sided matte finish with good ink absorption
  • Waterproof print surface with bright color and a soft touch
  • No preprocessing and no powder left after shaking

Cons

  • No stated coating thickness or layer count in the listing
  • No stated wash guidance in the listing
  • Roll only; no sheet pack in this listing
  • Press time of 10 to 15 seconds is longer than the 6 to 10 seconds Colorfairy states
Colorfairy DTF Transfer Film 13" x 19"

Colorfairy DTF Transfer Film 13" x 19"

Colorfairy9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

100 sheets of 13 in x 19 in dual-sided matte DTF film with hot or cold peel.

Pros

  • 100 sheets of 13 in x 19 in film, sized for desktop DTF printers
  • 0.03 in (0.76 mm) thickness stated in the listing
  • Hot or cold peel with a stated press time of 6 to 10 seconds
  • Color fastness rating of 4-5 degrees and a stated 48-hour wait before the first wash

Cons

  • No warranty term is stated in the listing
  • Sheets suit smaller runs; long production runs suit a roll better
  • No stated printer models in the listing
  • Best durability claim depends on Colorfairy's own powder and ink

Step 1: Print the design on the film

Start with the marked print side of the film. GOZYE marks the print side with tape or an arrow, and Colorfairy marks the print side on the packaging, so check the mark before the first print. The film goes through a DTF printer with DTF inks, and the coating holds the ink in place instead of letting it pool or bleed. Shyxen lists compatibility with the L1800, XP-15000 and ET4700, and Procolored and Colorfairy describe their film as suited to desktop DTF printers. For printer costs, see DTF printer prices.

Sheet film suits a design or a short run: Colorfairy sells 100 sheets at 13 in x 19 in, a size that fits desktop printing without cutting a roll. Roll film suits longer runs: Shyxen, GOZYE and Procolored each sell a 13 in x 328 ft roll, so the film can be cut to the size each design needs. Either way, print on the marked print side only.

Step 2: Apply the powder and melt it

While the ink is still wet, dust hot-melt powder over the printed design and shake off the excess. The anti-static coating on these films keeps powder off the non-design areas: Shyxen, GOZYE, Procolored and Colorfairy each state an anti-static layer or coating, and each states that no powder remains after shaking. No weeding is needed, since the powder only sticks where the ink is wet.

Next, melt the powder in a DTF oven until it bonds with the ink. Colorfairy lays out the chain as 4 steps: print on the film, apply powder and shake off the excess, melt the powder in a DTF oven, then heat press and peel off the PET film. Shyxen adds that no fabric pretreatment is needed before pressing, which saves a step for makers who press straight from the film.

Step 3: Press the transfer and peel the film

Place the film on the fabric, print side down, and press it with a heat press. The stated settings differ by film: Shyxen states 140-160°C for 8-12 seconds, Colorfairy states 266 – 320 °F for 6 to 10 seconds, and GOZYE and Procolored each state 266-320 °F for 10 to 15 seconds. Follow the setting the film in hand states, since the coating and peel type are matched to it.

Peel timing depends on the film. Shyxen supports instant, hot, warm and cold peel, with clean removal within 2 seconds after pressing. GOZYE and Procolored support hot and cold peel, and Colorfairy supports hot or cold peeling. A hot peel comes off right after pressing, while a cold peel waits for the film to cool. Either way, the print should stay on the fabric while the PET film lifts away cleanly.

Step 4: Let the print rest, then wash with care

Give the print time to settle before washing. Colorfairy states a wait of 48 hours before the first wash, and a color fastness rating of 4-5 degrees. The finished prints are described as waterproof, crack-resistant and fade-resistant: Shyxen states the print stays waterproof, crack-resistant and fade-resistant after multiple washes while keeping a soft hand feel, and GOZYE and Procolored state washable prints with no cracking and no fading. Colorfairy states the design can stay vibrant for up to 2 years in a dry environment when used with its own powder and ink.

How to Make a DTF Transfer: The Gear That Handles Each Step

Each step above needs film that prints cleanly, takes powder evenly and releases under the press, and the 4 films below cover the printing, powder and pressing steps, ranked by their stated specs. See the best DTF transfer film roundup for more film choices.

Common mistakes to avoid

  • Printing on the wrong side instead of the marked print side.
  • Skipping the powder step or pressing before the powder has melted into the ink.
  • Using the wrong press setting for the film in hand instead of the one its listing states.
  • Peeling a cold-peel film while it is still hot, or rushing the first wash before the stated wait has passed.
  • Pressing a design onto fabric the film listing does not cover.

FAQ: lasers and CNC

What temperature and time does a DTF transfer need?

It depends on the film. Shyxen states 140-160°C for 8-12 seconds, Colorfairy states 266 – 320 °F for 6 to 10 seconds, and GOZYE and Procolored each state 266-320 °F for 10 to 15 seconds. Use the setting the film in hand states.

Can DTF transfers go on dark fabric?

Yes. Shyxen states the film works on all garment colors and a wide range of materials, including cotton, denim, leather, spandex, nylon, canvas and polyester, and GOZYE and Colorfairy state the same all-color coverage, so dark shirts are covered along with light ones.

Should I hot peel or cold peel a DTF transfer?

Either works with the films here. Shyxen supports instant, hot, warm and cold peel with removal within 2 seconds after pressing, while GOZYE, Procolored and Colorfairy support hot and cold peel. Follow the peel type the film in hand states.

How long should I wait before washing a DTF print?

Colorfairy states a wait of 48 hours before the first wash for the best color stability. The prints are described as waterproof and fade-resistant after washing, so the wait is about color stability.

Do DTF transfers need pretreatment?

Not with the films here. Shyxen states no fabric pretreatment is required, and Procolored states no preprocessing is needed, so the chain runs from print to powder to press without a separate fabric step.

Related: the best DTF transfer film roundup, DTF transfer film vs heat transfer paper and DTF vs heat transfer vinyl. Also see our best DTF powder for black shirts.

More buying guides