Best Heat Resistant Tape for Sublimation (2026)
5 heat-resistant tapes for sublimation press work, from 10mm polyimide rolls to a 20mm PET tape, compared by width, length and heat resistance.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOkomagix 10mm 16m9.7/10View on Amazon - 2
Best Long RollsMEBMIK 10mm 33m9.7/10View on Amazon - 3
Best Wide TapeFyguard 20mm 30m9.6/10View on Amazon - 4
Best 2-Roll PackEQUTY BAYMERS 10mm9.6/10View on Amazon
A sublimation print only sells when the transfer stays put under the press, and a strip of heat tape is what holds the paper to the blank while the heat does its work. The best heat resistant tape for sublimation holds through the press cycle, peels off clean and leaves no residue on the blank. This guide compares tapes by width, length, roll count, material and heat resistance, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Okomagix 10mm 16m: 6 rolls of 10mm polyimide tape, short-term resistance to 260C (500F), with sublimation time and temperature tips stated. Check price on Amazon
- Best Long Rolls MEBMIK 10mm 33m: 6 rolls of 10mm tape at 33m (108ft) each, with 250C heat resistance. Check price on Amazon
- Best Wide Tape Fyguard 20mm 30m: 20mm wide PET tape in 5 rolls of 30m (98ft), rated to 220C with a 230C short-term maximum. Check price on Amazon
- Best 2-Roll Pack EQUTY BAYMERS 10mm: 2 rolls of 10mm polyimide tape at 33m (108ft), rated to 482F (250C). Check price on Amazon
Machines on the list

6 Rolls Heat Tape, High Temperature Heat Resistant
Polyimide heat tape in 6 rolls of 10mm by 16m, with short-term resistance to 260C and stated sublimation time and temperature tips.
Pros
- Short-term resistance to 260C (500F), the highest here
- Sublimation tips stated: 375F to 400F for 45 to 60 seconds
- 6 rolls of 10mm by 16m
- Core diameter stated at 38mm (1.5inch)
Cons
- No warranty term is stated
- No safety listing is stated
- 16m length, shorter than the 33m rolls
- Sublimation tips cite medium pressure without defining it

MEBMIK Heat Tape for Sublimation Transfer
Polyimide heat tape in 6 rolls of 10mm by 33m, with 250C heat resistance and no residue stated.
Pros
- 6 rolls of 10mm by 33m (108ft), the longest rolls here
- 250C heat resistance stated
- Polyimide film with high temperature resistant adhesive
- No residue stated
Cons
- No warranty term is stated
- No safety listing is stated
- No sublimation time or temperature tips are stated
- No core diameter is stated

2 Rolls 10mm X 33m 108ft Heat Tape,Adhesive Heat
Polyimide heat tape in 2 rolls of 10mm by 33m, rated to 482F (250C) with no residue stated.
Pros
- 33m (108ft) rolls match the longest here
- Rated to 482F (250C)
- Polyimide film tape with heat adhesive
- No residue stated
Cons
- Only 2 rolls in the pack, the fewest here
- No warranty term is stated
- No safety listing is stated
- No sublimation time or temperature tips are stated

5 Rolls Heat Resistant Tape 20mm × 30m (98ft)
Blue PET heat tape in 5 rolls of 20mm by 30m, rated to 220C with a 230C short-term maximum.
Pros
- 20mm width, the widest here
- 5 rolls of 30m (98ft)
- PET material with heat insulation stated
- Flexible and not easy to tear, per the listing
Cons
- Lowest stated heat limits here: 220C usual, 230C short-term
- Bullets give the width as 0.78 feet and the length as 30mm, against a title of 20mm by 30m
- No warranty term is stated
- No safety listing is stated

MEBMIK 6 Rolls 10mm x16m(52FT)
Polyimide heat tape in 6 rolls of 10mm by 16m, with 250C heat resistance and no residue stated.
Pros
- 6 rolls of 10mm by 16m
- 250C heat resistance stated
- Polyimide film with high temperature resistant adhesive
- No residue stated
Cons
- 16m length, shorter than the 33m rolls
- No warranty term is stated
- No safety listing is stated
- No sublimation time or temperature tips are stated
Other machines to compare
MEBMIK 2 Rolls 10mm x16mCheck price on Amazon
Cricut Heat Resistant Tape for EasyPressCheck price on Amazon
Heat Tape for SublimationCheck price on Amazon
Cricut® Heat Resistant TapeCheck price on Amazon
6 Rolls Heat Resistant Tape 10mm x 49Ft Transfer Tape forCheck price on Amazon
Specs compared
| Model | HQ Score | Width | Length | Rolls | Material | Heat resistance | Warranty |
|---|---|---|---|---|---|---|---|
| Okomagix 10mm 16m | 9.7/10 | 10mm | 16m (52ft) | 6 | Polyimide | 260C short-term (500F) | Not stated |
| MEBMIK 10mm 33m | 9.7/10 | 10mm | 33m (108ft) | 6 | Polyimide | 250C | Not stated |
| EQUTY BAYMERS 10mm | 9.6/10 | 10mm | 33m (108ft) | 2 | Polyimide | 482F (250C) | Not stated |
| Fyguard 20mm 30m | 9.6/10 | 20mm | 30m (98ft) | 5 | PET | 220C, 230C short-term | Not stated |
| MEBMIK 10mm 16m | 9.5/10 | 10mm | 16m (52ft) | 6 | Polyimide | 250C | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 3 November 2026. Where a listing contradicts itself, both figures are shown.
How the picks were scored
Each tape is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Okomagix 10mm 16m | 9.7 | 32 | 22 | 21 | n/a | 0 |
| MEBMIK 10mm 33m | 9.7 | 30 | 22 | 21 | n/a | 0 |
| EQUTY BAYMERS 10mm | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Fyguard 20mm 30m | 9.6 | 28 | 21 | 20 | n/a | 0 |
| MEBMIK 10mm 16m | 9.5 | 27 | 20 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
Polyimide or PET
4 of the 5 tapes are polyimide film tape, and 1 is PET. 3 of the polyimide tapes state 250C heat resistance, while the Okomagix tape states 260C short-term. The PET tape states 220C with a 230C short-term maximum, so the material and the heat limit go together here.
Buying guide: the best heat resistant tape for sublimation for press work
Width: 10mm or 20mm
4 of the picks are 10mm wide and 1 is 20mm wide. The Fyguard tape is the only 20mm pick, and the rest are 10mm. The width on the listing is the guide: a wider tape covers a wider strip of the blank edge.
Length and roll count
Rolls run 16m, 30m or 33m, in packs of 2, 5 or 6 rolls. The longest rolls are 33m (108ft), on the MEBMIK 33m tape and the EQUTY BAYMERS tape. The short ones are 16m (52ft), on the MEBMIK 16m tape and the Okomagix tape. A pack with more rolls suits a maker who presses often, while a 2-roll pack suits a lighter schedule.
Heat resistance
3 of the picks state 250C. The Okomagix tape states short-term resistance to 260C (500F) and long-term use to 220C (428F). The Fyguard PET tape states 220C (428F) with a short-term maximum of 230C (446F). The Okomagix listing also gives press tips: heat transfer at 260F to 315F for 10 to 15 seconds, and sublimation at 375F to 400F for 45 to 60 seconds at medium pressure.
No residue
All 5 picks state no residue, with wording like comes off clean and easy to peel. That matters on a blank that goes straight to a buyer: residue on the surface shows, and a tape that lifts clean keeps the finish as printed.
What else the tape is listed for
These tapes are not only for sublimation. The listings also name electronics, soldering, circuit boards, 3D printing, coffee cups and clothes. The Fyguard listing notes a 200C limit with removal within 30 minutes for ironing clothes. Match the extra use to the listing that states it, since no pick lists every use.
Project Match
- Sublimation coffee cups: the Fyguard PET tape lists coffee cup transfer, and the Okomagix tape lists sublimation coffee cups.
- Heat press vinyl and sublimation press work: the MEBMIK tapes and the Okomagix tape list heat press and sublimation press vinyl.
- Electronics and soldering: the EQUTY BAYMERS, MEBMIK and Okomagix tapes list electronics and soldering.
- Clothes and ironing: the Fyguard listing notes removal within 30 minutes and a 200C limit for ironing clothes.
- 3D printing: the Okomagix listing lists 3D printing among its uses.
FAQ: lasers and CNC
What is heat resistant tape for sublimation?
It is a polyimide film tape with a heat adhesive, or in the case of the Fyguard pick, a PET tape. It holds transfer paper to the blank under the heat press and peels off clean with no residue, per the listings.
What temperature can sublimation tape handle?
The polyimide picks state 250C, and the Okomagix tape states short-term resistance to 260C (500F). The Fyguard PET tape states 220C (428F) with a short-term maximum of 230C (446F).
Does heat tape leave residue?
All 5 picks state no residue. The listings describe the tape as coming off clean and easy to peel, with no residue left on the surface.
How wide should sublimation tape be?
4 of the picks are 10mm wide and 1 is 20mm wide. The width on the listing is the guide, and the Fyguard tape is the only 20mm pick here.
Can I use heat tape for soldering?
The listings state electronics and soldering uses for the EQUTY BAYMERS, MEBMIK and Okomagix tapes, and the Fyguard PET tape lists electronic soldering. Check the listing for the use you need, since the stated uses differ by pick.
Related: best ceramic mug blanks for laser engraving, best automatic heat press, auto heat press vs clamshell and best adhesive vinyl for Cricut. Also see our heat presses and sublimation hub.




