Best Large Filament Dryer (2026)
Five large filament dryers compared by maximum temperature, capacity, heater, chambers, materials and warranty for large spools and engineering filament.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best for Engineering FilamentsSUNLU Dryer E29.7/10View on Amazon - 2
Best Multi-RollCreality Multi-Roll Dryer9.6/10View on Amazon - 3
Best With DisplaySUNLU SP2 Dryer9.5/10View on Amazon
A spool that has sat open on the shelf can turn a clean print into a stringy mess, with layers that do not stick and a nozzle that clogs halfway through a job. A best large filament dryer brings that spool back to dry, steady printing, so the next sign, part or prototype starts from dry filament. This guide compares large dryers by maximum temperature, capacity, heater, chambers and materials.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Affiliate disclosure.
Quick picks
- Best for Engineering Filaments SUNLU Dryer E2: 110℃ maximum, dual-chamber drying and annealing, 500W PTC heater. Check price on Amazon
- Best Multi-Roll Creality Multi-Roll Dryer: 10-roll capacity, 70°C within 5 minutes and timed drying from 1 to 48 hours. Check price on Amazon
- Best With Display SUNLU SP2 Dryer: HD LCD touch screen, hygrometer and a 1 year manufacturer warranty. Check price on Amazon
Machines on the list

SUNLU E2 3D Printer Filament Dryer
A dual-chamber dryer and annealer with a 110℃ maximum, a 500W PTC heater and room for 2 x 1KG, 2 x 2KG or 1 x 3KG spools.
Pros
- 110℃ maximum for drying and annealing engineering filaments
- 500W PTC heater, 325W rated power, heats to 70°C in 30 minutes
- Dual-chamber design dries and anneals at the same time
- Triple-Safe with dual temperature protection and a cool-touch exterior below 60°C
Cons
- No warranty term is stated
- Heats to 70°C in 30 minutes, slower than the SP2 at 15 minutes
- 7.6KG net weight, the heaviest of the full-data picks

Creality Multi-Roll Filament Dryer
A 10-roll dryer and storage box with a 70℃ maximum, timed drying from 1 to 48 hours and a bracket that supports 10KG of filament.
Pros
- Holds 10 rolls, with a bracket that supports 10KG of filament
- Reaches 70°C within 5 minutes
- Timed drying from 1 to 48 hours, with power-off temperature memory
- Fire-retardant materials inside, with an exterior below 50°C during operation
Cons
- No warranty term is stated
- No filament diameters are stated
- No display or humidity reading is stated
- Heater power is printed as 40OW, so the wattage is not clear

SUNLU 3KG Filament Dryer SP2 & Storage Box
A 3KG dryer and storage box with a 250W PTC element heating to 70°C in 15 minutes, an HD LCD touch screen and a hygrometer.
Pros
- Heats to 70°C in 15 minutes with a 250W PTC element
- Holds 2 rolls of 1kg spool and up to a larger 3kg spool
- HD LCD touch screen shows temperature, time and humidity, with presets
- 1 year manufacturer warranty stated
Cons
- No safety protections are stated
- No fire-retardant material is stated
- Drying time for a full spool is not stated
- Compatible diameters are 1.75mm and 2.85mm only, with no 3.00mm size stated

Official Creality Filament Dryer
A 4-spool dryer with dual independent heating chambers, dual 200W PTC heaters and a maximum temperature of 85°C.
Pros
- 4 spools dry and print at once, with 8 filament holes and PTFE tubing
- Dual chambers with independent temperature control for 2 filament types at once
- Dual 200W PTC heaters reach up to 85°C for engineering filaments
- Single or dual chamber modes for flexible drying
Cons
- No warranty term is stated
- No safety feature is stated
- Other brands' plastic trays must be heat resistant, per the listing note
- Two filament types at different temperatures at once, not four

Comgrow 3D Printer Filament Dryer Box
A filament dryer box storing 2 rolls of 1kg spools, with a 40°~ 50 °C range and a 2-inch LCD screen.
Pros
- Stores 2 rolls of 1kg spools during printing
- Inner size of 9.29*6.49*9.13 inch for standard spools
- Adjustable temperature range of 40°~ 50 °C with 6 to 12 hour setting time
- Silicone cable sheath and Teflon tube outlet for smooth feeding
Cons
- No warranty term is stated
- Maximum temperature is only 50°C
- Single temperature range against the SUNLU wider range
- No food use is stated, filament drying only
Other machines to compare
SUNLU Official Filament Dryer S4Check price on Amazon
Comgrow Filament Dryer Box for 1.75/2.85mm PLA PETG TPU ABSCheck price on Amazon
2026 New Official CREALITY Space Pi Filament Dryer PlusCheck price on Amazon
2026 New Official CREALITY Filament Dryer Space Pi SECheck price on Amazon
Official Creality Filament DryerCheck price on Amazon
Specs compared
| Model | HQ Score | Max temp | Capacity | Heater | Chambers | Materials | Warranty |
|---|---|---|---|---|---|---|---|
| SUNLU Dryer E2 | 9.7/10 | 110℃ | 2 x 1KG, 2 x 2KG or 1 x 3KG | 500W PTC | Dual | PA, PC, Nylon, PLA, PETG, ABS | Not stated |
| Creality Multi-Roll Dryer | 9.6/10 | 70℃ | 10 rolls | PTC hot air heater | Not stated | Not stated | Not stated |
| SUNLU SP2 Dryer | 9.5/10 | 70°C | 2 x 1kg, up to 3kg spool | 250W PTC | Not stated | PLA, PETG, TPU, ABS, ASA, PA, PC | 1 year |
| Creality Space Pi X4 | 9.5/10 | 85℃ | Not stated | Not stated | Dual independent | PLA, PETG, ABS, TPU, ASA, PC, PA, PAHT | Not stated |
| Comgrow SH01 Dryer | 9.4/10 | Not stated | Not stated | Not stated | Not stated | PLA, PETG, ABS | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (10 November 2026). Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
Three listings give full data and two give a title only, so the last two picks are ranked on the title alone. Only 1 of the 5 states a warranty term, and 2 state fire-retardant materials. Maximum temperature is stated on 4 of the 5, while capacity in spools or rolls is stated on 3.
Buying guide: your best large filament dryer
Capacity and spool size
Capacity decides whether a dryer fits a workshop with several spools. The Creality dryer holds 10 rolls, with a bracket that supports 10KG of filament, while the SUNLU E2 holds 2 x 1KG, 2 x 2KG or 1 x 3KG spools. The SUNLU SP2 holds 2 rolls of 1kg spool and up to a larger 3kg spool, with a bar spool holder that supports a 250g or 500g spool or a paper spool.
Temperature and heating
Maximum temperature sets which filaments a dryer can handle. The SUNLU E2 reaches 110℃, the Creality Space Pi X4 reaches 85℃ in its title, and the SP2 and Creality multi-roll dryers reach 70°C. Heating speed also differs: the Creality multi-roll dryer reaches 70°C within 5 minutes, the SP2 heats to 70°C in 15 minutes with a 250W PTC element, and the E2 heats to 70°C in 30 minutes with a 500W PTC heater at 325W rated power.
Drying and storage
A dryer that also stores filament keeps a spool dry between jobs. The SP2 base detaches from the storage box, which seals with a sliding latch and 2 gaskets, and filament feeds directly into the printer while drying or while stored. The Creality multi-roll dryer combines drying and storage in one box, with a foldable protective cover and a detachable heating module.
Materials
Check the material list before buying, since the lists differ. The E2 is designed for engineering filaments, naming PA, PC and Nylon in GF and CF variants, plus PA6-CF, PA12-CF, FR-ABS and PC-ABS, and regular PLA, PETG and ABS. The SP2 names PLA, PETG, TPU, ABS, ASA, PA and PC, while the Space Pi X4 title names PLA, PETG, ABS, TPU, ASA, PC, PA and PAHT. See also our best filament dryer for nylon and best filament dryer for petg guides.
Fan, vent and feed
Airflow and feed decide how evenly a spool dries and how easily it prints. The E2 uses a metal roller fan as part of its Triple-Safe design, and its packing list includes 8cm PTFE tubes and 100cm PTFE tubes. The SP2 uses 360° surround heating, with 6 silicone holes and 2 PTFE tubes, and feeds filament directly into the printer while it dries. The Creality multi-roll dryer uses a PTC hot air heater, and no fan is named in its listing.
Filament dryers run hot, so check the safety statements on each listing. The E2 names dual temperature protection, a cool-touch exterior below 60°C and fire-retardant materials, while the Creality multi-roll dryer names fire-retardant materials inside and an exterior that remains below 50°C during operation. Keep a dryer on a stable surface, away from flammable material, and vent fumes from heated plastics.
Project Match
- Engineering parts in PA, PC or nylon: the SUNLU E2, with a 110℃ maximum and an annealing chamber.
- Everyday PLA, PETG, TPU and ABS prints: the SUNLU SP2, with presets on an HD LCD touch screen.
- Several spools drying and stored together: the Creality multi-roll dryer, with room for 10 rolls.
- Large 3kg spools: the SUNLU SP2, which holds up to a larger 3kg spool, or the SUNLU E2, which holds 1 x 3KG spool.
- Space Pi X4 and Comgrow SH01: project match is not stated beyond the title, which names materials but no capacity or work area.
How the scores add up
Each dryer is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A factor the listing does not state scores zero, which is why only the SP2 scores on warranty and only two dryers score on safety.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU Dryer E2 | 9.7 | 33 | 24 | 21 | 7 | 0 |
| Creality Multi-Roll Dryer | 9.6 | 32 | 22 | 21 | 5 | 0 |
| SUNLU SP2 Dryer | 9.5 | 30 | 21 | 20 | 0 | 2 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
How long should filament dry?
The listings here do not give a drying time for a full spool. The Creality multi-roll dryer supports timed drying from 1 to 48 hours, with power-off temperature memory, so the timer can be set from the listing figures.
Can a filament dryer feed the printer while drying?
Yes, on the SP2, which states that filament feeds directly into the printer while drying or while stored in the sealed box. The E2 packing list includes PTFE tubes for feeding, and the SP2 has 6 silicone holes and 2 PTFE tubes.
What temperature do filament dryers reach?
The SUNLU E2 reaches 110℃, the Creality Space Pi X4 reaches 85℃ in its title, and the SP2 and Creality multi-roll dryers reach 70°C. Check the maximum against the filament material before buying.
Do filament dryers work for nylon and engineering filaments?
The E2 is designed for engineering filaments, naming PA, PC and Nylon in GF and CF variants, plus PA6-CF, PA12-CF, FR-ABS and PC-ABS. The SP2 also names PA and PC among its materials.
Can I store filament in the dryer?
Yes, on the SP2 and the Creality multi-roll dryer, which combine drying and storage. The SP2 base detaches from the storage box for sealed storage, and the Creality dryer stores multiple spools with its heating module detached.
Related: the filament dryer vs dry box guide, the filament dryer vs food dehydrator guide and our 3D printers hub.




