Best PETG Filament Black (2026): 5 Picks for Tough Outdoor Parts
Five black PETG filaments for tough outdoor parts, compared by spool size, diameter, tolerance, speed and print settings, with the 4KG bundle and the 600 mm/s picks called out.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OveralliSANMATE PETG HF 4KG9.7/10View on Amazon - 2
Best 2-PackDeeplee Rapid PETG 2KG9.6/10View on Amazon - 3
Best Single SpoolEONO3D PETG Black 1kg9.6/10View on Amazon
A planter that sits in the sun all summer, or a bracket that holds up under load, is the kind of part that calls for PETG. PLA softens in heat, and a part that cracks on the first drop is no use outdoors. The best petg filament black is the spool that prints tough, weather-resistant parts in a deep black, with tight diameter control and low stringing. This guide compares black PETG filaments by spool size, diameter, tolerance, speed and print settings, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall iSANMATE PETG HF 4KG: 4KG bundle with 50-400 mm/s speed, +/- 0.02 mm accuracy and stated settings for Bambu printers Check price on Amazon
- Best 2-Pack Deeplee Rapid PETG 2KG: 2KG of rapid PETG with up to 600 mm/s speed, +/- 0.02 mm accuracy and water resistance Check price on Amazon
- Best Single Spool EONO3D PETG Black 1kg: 1kg spool with +/- 0.02 mm accuracy, low stringing and stated settings at 120-180 mm/s Check price on Amazon
Machines on the list

iSANMATE HF PETG Filament Bundle 4KG Black Rapid
4KG bundle of black HF PETG filament, 1.75 mm, with 50-400 mm/s speed and +/- 0.02 mm accuracy, for Bambu printers.
Pros
- 4KG bundle in four 1kg spools for long print runs
- Speed range of 50-400 mm/s, with 600 mm/s for simple models
- Stated settings: nozzle 230-260°C, bed 60-80°C
- Stands up to water, UV rays and heat, per the listing
Cons
- No warranty term is stated
- No safety listing is stated
- Best dried at 60°C for 5-8 hours before printing
- Developed for Bambu Lab printers, so check other printers first

DEEPLEE Rapid PETG Filament 1.75mm 2 Pack 1kg
2KG pack of black rapid PETG filament, 1.75 mm, with up to 600 mm/s speed and +/- 0.02 mm accuracy, for most FDM printers.
Pros
- Maximum speed of 600 mm/s for high-speed printing
- High toughness and impact strength, per the listing
- Resistant to water and weathering, per the listing
- Glossy surface with high light transmission, per the listing
Cons
- No nozzle or bed temperature is stated
- No warranty term is stated
- No safety listing is stated
- No drying guidance is stated

EONO3D Black PETG Filament 1.75mm 1kg (2.2lb)
1kg spool of black PETG filament, 1.75 mm, with +/- 0.02 mm accuracy, low stringing and stated settings at 120-180 mm/s.
Pros
- Low stringing and strong layer adhesion, per the listing
- Dimensional accuracy of +/- 0.02 mm
- Stated settings: nozzle 230-260°C, bed 50-70°C, speed 120-180 mm/s
- Vacuum sealed with desiccant to preserve dryness
Cons
- 1kg spool, the smallest size here
- No warranty term is stated
- No safety listing is stated
- No drying guidance is stated

ELEGOO Rapid PETG 3D Printer Filament 1.75mm Black
A single 1KG spool of ELEGOO Rapid PETG with a stated top speed, accuracy and neat winding.
Pros
- Top speed up to 600 mm/s stated
- Accuracy of +/-0.02mm stated, with neat mechanical winding stated
- Good light transmittance and low shrinkage compared to PLA stated
- Fit for regular and high speed printers stated
Cons
- No nozzle or bed temperature table stated
- No warranty term stated
- No safety certification stated
- Single spool only, no bundle stated

ELEGOO PETG 3D Printer Filament 1.75mm Black 1KG
A black 1kg PETG filament spool at 1.75mm, stating diameter accuracy of +/- 0.02 mm, minimal warping and shrinkage, and universal compatibility with most 1.75 mm FDM 3D printers.
Pros
- Diameter accuracy of +/- 0.02 mm stated on the listing
- Smooth printing with minimal warping and shrinkage stated
- Full mechanical winding and manual inspection to reduce tangles and snaps
- Dried before packing and vacuum sealed against moisture and dust
Cons
- No UV, weather or heat figure stated
- No nozzle, bed or speed figures stated
- No warranty term stated
- Use as soon as possible after unpacking, per the listing
Other machines to compare
SUNLU PETG Filament 1.75mmCheck price on Amazon
SUNLU High Speed PETG Filament 1.75mmCheck price on Amazon
Creality PETG Filament 1.75mmCheck price on Amazon
ANYCUBIC PETG Filament 1.75mmCheck price on Amazon
OVERTURE High Speed PETG Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Spool | Diameter | Tolerance | Speed | Nozzle / bed | Drying |
|---|---|---|---|---|---|---|---|
| iSANMATE PETG HF 4KG | 9.7/10 | 4KG (4 spools) | 1.75 mm | +/- 0.02 mm | 50-400 mm/s, max 600 | 230-260°C / 60-80°C | 60°C for 5-8 hours |
| Deeplee Rapid PETG 2KG | 9.6/10 | 2KG (2 spools) | 1.75 mm | +/- 0.02 mm | Up to 600 mm/s | Not stated | Not stated |
| EONO3D PETG Black 1kg | 9.6/10 | 1kg spool | 1.75 mm | +/- 0.02 mm | 120-180 mm/s | 230-260°C / 50-70°C | Not stated |
| ELEGOO Rapid PETG 1kg | 9.6/10 | 1kg spool | 1.75 mm | +/- 0.02 mm | Up to 600 mm/s | Not stated | Not stated |
| ELEGOO PETG Black 1kg | 9.6/10 | 1kg spool | 1.75 mm | +/- 0.02 mm | Not stated | Not stated | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (10 November 2026). Speed is the print speed as listed.
How the picks were scored
Each filament is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| iSANMATE PETG HF 4KG | 9.7 | 32 | 22 | 22 | n/a | 0 |
| Deeplee Rapid PETG 2KG | 9.6 | 30 | 21 | 21 | n/a | 0 |
| EONO3D PETG Black 1kg | 9.6 | 29 | 21 | 20 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
What the listings tell you, and what they leave out
Five PETG filament listings were compared. Two stated nozzle and bed temperatures; one stated a speed range; two stated only the title. All five stated a 1.75 mm diameter and a black color, and all five stated a +/- 0.02 mm tolerance, three in the bullets and two in the title only. None stated a warranty term, and none stated a safety listing. Three listings stated a maximum speed of 600 mm/s.
Two listings here are title-only: the ELEGOO PETG and the ELEGOO Rapid PETG. Their cards keep the title facts only, and they score below the full-data picks.
Buying guide: choosing the best petg filament black
Spool size
Spool sizes here run from 1kg to 4KG. The iSANMATE bundle holds 4KG in four 1kg spools, the Deeplee pack holds 2KG in two 1kg spools, and the EONO3D and ELEGOO spools hold 1kg each. A bundle keeps spares on the shelf for a long print run. A 1kg spool suits a single project or a first spool of a new brand.
Speed
Three listings state a maximum speed of 600 mm/s: iSANMATE, Deeplee and the ELEGOO Rapid PETG. The iSANMATE listing states a speed range of 50-400 mm/s, with 600 mm/s for simple models. The EONO3D listing states a speed of 120-180 mm/s. The ELEGOO PETG listing states no speed.
Diameter and tolerance
All five filaments state a 1.75 mm diameter and a +/- 0.02 mm tolerance. A stated tolerance lets the printer feed consistently, so check the tolerance in the listing before ordering.
Print settings
Two listings state nozzle and bed temperatures. The iSANMATE listing states a nozzle temperature of 230-260°C and a bed temperature of 60-80°C. The EONO3D listing states a nozzle temperature of 230-260°C and a bed temperature of 50-70°C. The other three listings state no nozzle or bed temperature, so check the filament maker’s settings before the first print.
Outdoor use and drying
PETG suits outdoor parts. The iSANMATE listing states its filament stands up to water, UV rays and heat, and names planters, bird feeders, watering cans and automotive parts. The Deeplee listing states resistance to water and weathering. The iSANMATE listing also states to dry at 60°C for 5-8 hours before printing. The EONO3D listing states vacuum sealing with desiccant to preserve dryness.
For drying between prints, see the best filament dry box under 35.
PETG printing gives off little odor, per the iSANMATE listing, but print in a ventilated space and keep the printer away from open flame.
Project Match
- Outdoor planters and bird feeders: iSANMATE PETG, which names planters, bird feeders, watering cans and automotive parts.
- Mechanical parts and brackets: EONO3D PETG, which names brackets, enclosures, tools and parts that must withstand stress.
- High-speed printing: Deeplee PETG, which states a maximum speed of 600 mm/s.
- Bambu Lab printers: iSANMATE PETG, which is developed for Bambu Lab printers, AMS and AMS Lite.
- High-speed printing on a 1kg spool: ELEGOO Rapid PETG, which states up to 600 mm/s high speed.
FAQ: lasers and CNC
What is PETG filament best for?
PETG is best for tough, weather-resistant functional parts, per the listings. The iSANMATE listing names planters, bird feeders, watering cans and automotive parts, and the EONO3D listing names brackets, enclosures and tools.
Is PETG filament heat resistant?
Yes, per the listings. The iSANMATE listing states its PETG is tougher and more heat-resistant than PLA, and stands up to water, UV rays and heat. The listings state no heat resistance figure, so match the stated claims to the part.
How long does PETG filament last?
No listing here states a shelf life or a print life. The listings state vacuum sealing with desiccant to preserve dryness, and iSANMATE states to dry at 60°C for 5-8 hours before printing. Store the spool sealed and dry.
What does PETG filament stand for?
PETG stands for polyethylene terephthalate glycol, a plastic known for toughness and weather resistance. The listings here use it for outdoor parts, brackets, enclosures and mechanical components.
What speed can PETG print at?
Three listings here state a maximum speed of 600 mm/s: iSANMATE, Deeplee and the ELEGOO Rapid PETG. The iSANMATE listing states a speed range of 50-400 mm/s, and the EONO3D listing states 120-180 mm/s.
Related: the best ABS filament black, the eSUN PETG vs Sunlu PETG, the best 3D printer lubricant oil, and the 3D printers hub.




