Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Petg Filament Clear (2026): 5 Picks for Clear, Tough Prints

Five clear PETG filaments in 1.75mm, compared by rated speed, diameter tolerance, drying guidance and spool size, with the listing facts behind each pick.

Best Petg Filament Clear (2026): 5 Picks for Clear, Tough Prints
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1iSANMATE PETG HFBest OveralliSANMATE PETG HF9.5/10View on Amazon
  2. 2FLASHFORGE Rapid PETGBest High SpeedFLASHFORGE Rapid PETG9.5/10View on Amazon
  3. 3XZN PETG ClearBest ValueXZN PETG Clear9.5/10View on Amazon
  4. 4EONO3D PETG 6kg BundleBest Bulk BundleEONO3D PETG 6kg Bundle9.5/10View on Amazon

Clear PETG is the filament to reach for when a print needs to show what sits inside it, let light pass through, or hold up on a sunny shelf without turning brittle. Makers use it for planters, bird feeders, watering cans, automotive parts, organizers and display pieces, and this guide compares the best petg filament clear options on what each listing states: rated speed, diameter tolerance, drying guidance and spool size. Every pick below shares the same diameter, so the choice comes down to stated specs and how each listing backs them up.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall iSANMATE PETG HF: Rated 50-400 mm/s with a 600 mm/s maximum for simple models, a 1.75mm diameter held to ±0.02mm, and drying guidance of 60°C for 5-8 hours. Check price on Amazon
  • Best High Speed FLASHFORGE Rapid PETG: A 600 mm/s maximum rated speed with ±0.02mm tolerance and a listing claim of strong first-layer adhesion without pre-drying. Check price on Amazon
  • Best Value XZN PETG Clear: A 1kg spool at ±0.02mm tolerance with a stated 355m length, vacuum-sealed packaging and a 220-230°C nozzle range. Check price on Amazon
  • Best Bulk Bundle EONO3D PETG 6kg Bundle: Six separately sealed 1kg spools in one bundle for makers who print clear PETG across many projects. Check price on Amazon

Machines on the list

iSANMATE Transparent PETG HF Filament 50-400mm/s

iSANMATE Transparent PETG HF Filament 50-400mm/s

iSANMATE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A transparent PETG HF filament in 1.75mm, rated 50-400 mm/s with a 600 mm/s maximum for simple models, tuned for Bambu Lab printers with PETG HF parameters.

Pros

  • Rated 50-400 mm/s, with a 600 mm/s maximum for simple models
  • 1.75mm diameter held to ±0.02mm
  • Nozzle 230-260°C and bed 60-80°C, with drying guidance of 60°C for 5-8 hours
  • Maker says it fits 99% of FDM 3D printers, AMS and AMS Lite

Cons

  • Tuned for Bambu Lab PETG HF parameters; other printers use generic PETG settings
  • No warranty term is stated
  • Calls itself tougher and more heat-resistant than PLA, but states no temperature rating
FLASHFORGE Rapid PETG Filament 1.75mm Clear

FLASHFORGE Rapid PETG Filament 1.75mm Clear

FLASHFORGE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A rapid PETG filament in 1.75mm clear, rated to 600 mm/s with ±0.02mm tolerance and a listing claim of strong first-layer adhesion without pre-drying.

Pros

  • Rated to 600 mm/s with rapid melting and smooth flow, per the listing
  • ±0.02mm dimensional accuracy, even at high speeds, per the listing
  • Low shrinkage for stable dimensions and detailed surfaces, per the listing
  • Strong first-layer adhesion and bridging without pre-drying or parameter tweaks, per the listing

Cons

  • No nozzle or bed temperature is stated
  • No warranty term is stated
  • The drying note covers the PETG Metallic color series, not the clear spool
  • No odor, fume or ventilation guidance is stated
CLear PETG Filament, 3D Printer Filament 1.75mm

CLear PETG Filament, 3D Printer Filament 1.75mm

YOOPAI9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clear PETG filament in 1.75mm with ±0.03mm tolerance, vacuum-sealed packaging and stated nozzle and bed ranges, from a listing that describes it as odorless.

Pros

  • 1.75mm diameter with ±0.03mm tolerance and mechanical winding to reduce tangles
  • Nozzle 220-250°C and bed 70-80°C are both stated
  • Vacuum sealed after drying to guard against moisture, dust, clogging and bubbling, per the listing
  • Described as odorless, with a glossy finish and good light transmission, per the listing

Cons

  • ±0.03mm tolerance is looser than the ±0.02mm stated by three other picks
  • No printing speed is stated
  • The warranty field reads 180 with no unit, so no term can be confirmed
  • No drying time or temperature is stated
XZN PETG Filament 1.75mm Clear 3D Printer Filament

XZN PETG Filament 1.75mm Clear 3D Printer Filament

XZN9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clear PETG filament in 1.75mm with ±0.02mm tolerance, a stated 355m length on a 1kg spool, and vacuum-sealed packaging with desiccant.

Pros

  • ±0.02mm tolerance with low shrinkage and strong layer bonding, per the listing
  • Stated length of 355m on a 1kg spool
  • Nozzle 220-230°C and bed 70-80°C are both stated
  • Vacuum-sealed packaging with desiccant to guard against moisture, per the listing

Cons

  • No printing speed is stated
  • No warranty term is stated
  • No drying time or temperature is stated
  • No odor, fume or ventilation guidance is stated
EONO3D Clear PETG Filament 1.75mm

EONO3D Clear PETG Filament 1.75mm

EONO3D9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bundle of six separately sealed 1kg spools of transparent PETG in 1.75mm, for makers who print clear PETG across many projects.

Pros

  • Six separately packaged 1kg spools, 6kg in total, for storage and project planning
  • Translucent finish suited to decorative models, light-transmitting designs and organizers, per the listing
  • Each spool vacuum sealed with desiccant before opening, per the listing
  • Designed for 1.75mm FDM printers, with a note to confirm diameter and material compatibility first

Cons

  • No printing speed is stated
  • No nozzle or bed temperature is stated
  • No diameter tolerance is stated
  • No warranty term is stated

Other machines to compare

Specs compared

Model HQ Score Diameter Tolerance Rated speed Spool Nozzle temp Drying
iSANMATE PETG HF 9.5/10 1.75mm ±0.02mm 50-400 mm/s, 600 mm/s max 1kg 230-260°C 60°C, 5-8 hours
FLASHFORGE Rapid PETG 9.5/10 1.75mm ±0.02mm 600 mm/s max 1kg Not stated 80°C, 4-6 hours (Metallic series)
YOOPAI PETG Clear 9.5/10 1.75mm ±0.03mm Not stated 1kg 220-250°C Not stated
XZN PETG Clear 9.5/10 1.75mm ±0.02mm Not stated 1kg, 355m 220-230°C Not stated
EONO3D PETG 6kg Bundle 9.5/10 1.75mm Not stated Not stated 6 x 1kg Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026). Speed is the rated maximum the listing states; a blank means the listing states no figure.

How the picks were scored

Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
iSANMATE PETG HF 9.5 30 21 20 3 0
FLASHFORGE Rapid PETG 9.5 33 21 20 0 0
YOOPAI PETG Clear 9.5 28 20 19 3 0
XZN PETG Clear 9.5 29 21 21 0 0
EONO3D PETG 6kg Bundle 9.5 28 20 22 0 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.

What the listings tell you, and what they leave out

Five listings were read for this guide, and the gaps are as telling as the figures. Two state a maximum speed, and both give 600 mm/s: iSANMATE rates 50-400 mm/s with a 600 mm/s maximum for simple models, and FLASHFORGE rates 600 mm/s. Three state a ±0.02mm tolerance, while YOOPAI states ±0.03mm and EONO3D states no tolerance at all.

Drying guidance is just as uneven. iSANMATE states drying at 60°C for 5-8 hours before printing, and FLASHFORGE states 80°C for 4-6 hours for its Metallic color series, while the other three listings state no drying time. Only one listing carries a warranty field, and it reads 180 with no unit, so no pick in this guide earns a warranty score.

Buying guide: how to choose the best petg filament clear

Speed ratings

A speed rating is the maximum the listing states, not a promise for every model. iSANMATE rates 50-400 mm/s and adds a 600 mm/s maximum for simple models, while FLASHFORGE rates 600 mm/s. The other three state no speed, so compare them on tolerance and drying guidance instead.

Tolerance and diameter

Every pick here is 1.75mm filament, so diameter does not separate them, but tolerance does. iSANMATE, FLASHFORGE and XZN state ±0.02mm, YOOPAI states ±0.03mm, and EONO3D states no tolerance. A tighter stated tolerance means the maker claims more consistent feeding and stable prints.

Drying before printing

The listings tie moisture to bubbling and clogging: YOOPAI says vacuum sealing guards against both, and XZN says its sealed packaging keeps moisture out. iSANMATE states drying at 60°C for 5-8 hours before printing. A dry box keeps a spool dry between prints; see the best filament dry box under 35 picks.

Spool size and bundles

Four picks are a 1kg spool, and XZN states a 355m length for its spool. EONO3D is the only bundle: six separately sealed 1kg spools, 6kg in total. A bundle suits steady use; a single spool suits trying a new brand.

Clear PETG outdoors

Clear PETG suits outdoor parts, and iSANMATE names planters, bird feeders, watering cans and automotive parts, describing the filament as standing up to water, UV rays and heat. The other listings name no outdoor uses. For more, see the best 3D printer filament for outdoor use guide.

Safety

None of the five listings states ventilation guidance for printing PETG. YOOPAI describes its filament as odorless and iSANMATE says it has no noticeable odor during printing, but neither statement is ventilation guidance. Print where air can move, and consider a fume extractor made for 3D printers: see the best portable fume extractor for 3D printer picks.

Project Match

Each pairing uses only the project types the listings name.

  • Outdoor parts such as planters, bird feeders, watering cans and automotive parts: iSANMATE PETG HF, which names those uses.
  • Mechanical components, brackets, tooling jigs and printer parts: iSANMATE PETG HF, which names those uses.
  • Decorative models, light-transmitting designs, organizers and display projects: EONO3D PETG 6kg Bundle, which names those uses.
  • Prototypes, holders and enclosures: EONO3D PETG 6kg Bundle, which names those uses.
  • Prints with no stated project type: FLASHFORGE Rapid PETG, YOOPAI PETG Clear and XZN PETG Clear name no project types, so match them on speed and tolerance instead.

FAQ: lasers and CNC

What is PETG filament?

PETG is a filament for FDM 3D printers that the listings here describe as combining the easy printing of PLA with the toughness of ABS. iSANMATE calls it tougher and more heat-resistant than PLA, and YOOPAI says it combines the benefits of PLA and ABS with an odorless performance. Clear PETG adds light transmission and a glossy finish.

Who makes the best petg filament?

The top-ranked pick in this guide is the iSANMATE PETG HF, which scores highest on stated speed, tolerance and drying guidance. FLASHFORGE follows with a 600 mm/s maximum and ±0.02mm tolerance, and XZN follows with the same tolerance and a stated 355m length.

How long to dry PETG filament?

iSANMATE recommends drying at 60°C for 5-8 hours before printing. FLASHFORGE gives 80°C for 4-6 hours, but that note is written for its PETG Metallic color series, not the clear spool. The other three state no drying time, though YOOPAI and XZN say their filament arrives dried and vacuum sealed.

Does PETG filament need ventilation?

None of the five listings states ventilation guidance. YOOPAI describes its filament as odorless and iSANMATE says it has no noticeable odor during printing, but neither statement is ventilation guidance. Print where air can move; the safety note above links fume extractor picks for 3D printers.

What is PETG HF filament?

HF stands for high speed in the iSANMATE listing, which calls its filament a transparent PETG HF developed for Bambu Lab printers and rates it 50-400 mm/s with a 600 mm/s maximum for simple models. FLASHFORGE sells the same idea under the name Rapid PETG, rated to 600 mm/s.

Related: the 3D printers hub, best PETG filament black, PETG vs carbon fiber PETG, best PETG filament for durable prints, best filament dry box, and eSUN PETG vs SUNLU PETG.

More buying guides

3D Printers ·

Best PETG Filament for Bambu A1 (2026)

Five PETG filaments for the Bambu A1, from the RFID refill made for Bambu printers to two-color and single-spool packs, compared by tolerance and…