Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Filament Dry Box Under 35 (2026): 5 Boxes Compared

Five filament dry boxes under 35, compared by capacity, sealing, monitoring, feed holes and warranty, from what each listing states.

Best Filament Dry Box Under 35 (2026): 5 Boxes Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU Filament Dry BoxBest OverallSUNLU Filament Dry Box9.7/10View on Amazon
  2. 2YOOPAI Pro Box 4-PackBest MonitoredYOOPAI Pro Box 4-Pack9.6/10View on Amazon
  3. 3YOOPAI Box 4-PackBest 4-Pack ValueYOOPAI Box 4-Pack9.6/10View on Amazon
  4. 4Qacoczme Storage BoxBest for FeedingQacoczme Storage Box9.6/10View on Amazon
  5. 5AMZPro Box 4-PackBest Basic 4-PackAMZPro Box 4-Pack9.5/10View on Amazon

Wet filament hisses, pops and prints rough, and a spool left out on a shelf soaks up room air between prints. The best filament dry box under 35 keeps spools sealed and dry, with desiccant inside and a clear body so the spool can be seen without opening the lid.

One box feeds the printer while the filament stays sealed, one watches temperature and humidity, and the rest are simple sealed sets for sorting spools. The scores follow what each listing states and what it leaves out.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall SUNLU Filament Dry Box: Holds 2 rolls of 1kg filament or a 3kg spool, with a hygrometer, 6 output holes, PTFE tubes and a 1-year warranty. Check price on Amazon
  • Best Monitored YOOPAI Pro Box 4-Pack: A 4-pack with a temperature and humidity monitor, airtight sealing and reusable desiccants for 1KG spools. Check price on Amazon
  • Best 4-Pack Value YOOPAI Box 4-Pack: Four boxes with 8 50g desiccant packets and 18 labels for 1KG spools of PLA, ABS, PETG and TPU. Check price on Amazon
  • Best for Feeding Qacoczme Storage Box: Filament dispenses from a sealed connector on the lid without opening the box, with reusable desiccant. Check price on Amazon
  • Best Basic 4-Pack AMZPro Box 4-Pack: Four transparent boxes with a silicone seal and 50g desiccant for 1KG spools. Check price on Amazon

Machines on the list

SUNLU Filament Dry Box - 3KG Filament Storage Box

SUNLU Filament Dry Box - 3KG Filament Storage Box

SUNLU9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3KG dry box that holds 2 rolls of 1kg filament or a 3kg spool, with a hygrometer, 6 output holes and PTFE tubes for direct printing.

Pros

  • Holds 2 rolls of 1kg filament or a 3kg spool
  • Hygrometer and desiccant included for humidity checks
  • 6 output holes and 2 lengths of PTFE tube for direct printing
  • 1-year warranty stated

Cons

  • SP2 dryer base not included
  • The heaviest box here by listed weight
  • Rollers and bar spool holder add parts to keep track of
  • No desiccant count stated
YOOPAI Pro Filament Storage Box with Temperature

YOOPAI Pro Filament Storage Box with Temperature

YOOPAI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of airtight storage boxes with a temperature and humidity monitor, reusable desiccants and label slots for 1KG spools.

Pros

  • Temperature and humidity monitor built in
  • 4 boxes, one per spool
  • Airtight with a silicone seal and reusable desiccants
  • Flat-top design stacks for compact storage

Cons

  • Temperature is displayed in Celsius only
  • No output holes or feed connectors stated
  • No warranty term stated
  • Fits 1KG spools only
YOOPAI Filament Storage Box

YOOPAI Filament Storage Box

YOOPAI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of clear storage boxes with a silicone-sealed flip lid, 8 50g desiccant packets and 18 labels for 1KG spools.

Pros

  • 4 boxes, one per spool
  • 8 50g desiccant packets included
  • 18 identification labels included
  • Clear body shows each spool at a glance

Cons

  • No monitor or hygrometer stated
  • No output holes or feed connectors stated
  • No warranty term stated
Qacoczme 3D Printing Filament Storage Box

Qacoczme 3D Printing Filament Storage Box

Qacoczme9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 5.8L storage boxes with air-tight connectors, spool holders and reusable desiccant, for dispensing filament without opening the lid.

Pros

  • Filament dispenses from a sealed connector without opening the lid
  • Reusable desiccant turns green when wet, orange when dry again
  • Spool holders included
  • 12 labels included

Cons

  • No monitor or hygrometer stated
  • No warranty term stated
  • No output hole count stated
AMZPro Filament Storage Box

AMZPro Filament Storage Box

AMZPro9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of transparent storage boxes with a silicone seal and 50g desiccant for 1KG spools of PLA, ABS, PETG and TPU.

Pros

  • 4 boxes, one per spool
  • Silicone seal around the flip lid
  • Transparent body shows filament color without opening
  • Fits nearly all standard 1.75mm spools

Cons

  • Only 4 50g desiccant packets for 4 boxes
  • No labels stated
  • No monitor or hygrometer stated
  • No warranty term stated

Other machines to compare

Best filament dry box under 35 compared

Model HQ Score Spools Capacity Seal Monitor Feed Warranty
SUNLU Filament Dry Box 9.7/10 2 rolls of 1kg, or a 3kg spool 3KG Sliding latches, 2 gaskets Hygrometer 6 output holes, PTFE tubes 1 year
YOOPAI Pro Box 4-Pack 9.6/10 1KG each, 4 boxes 4-pack Silicone seal, airtight Temp and humidity monitor Not stated Not stated
YOOPAI Box 4-Pack 9.6/10 1KG each, 4 boxes 4-pack Silicone-sealed flip lid Not stated Not stated Not stated
Qacoczme Storage Box 9.6/10 1KG each, 2 boxes 5.8L, 2-pack Air-tight connectors Not stated Sealed connector on lid Not stated
AMZPro Box 4-Pack 9.5/10 1KG each, 4 boxes 4-pack Silicone seal, flip lid Not stated Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (4 November 2026).

What the filament dry box listings tell you

Only one of the five states a warranty term, the SUNLU at 1 year. Two listings contradict themselves: the Qacoczme spec table says Pack of 4 while the title and bullets say a 2-pack, and the YOOPAI spec table dimensions do not match the 9.03 by 8 by 3 size in the title. Three of the five are 4-packs, and only the SUNLU states output holes for feeding the printer.

Buying guide: a filament dry box under 35

Capacity and spool size

Every box here fits standard 1KG 1.75mm spools. The SUNLU holds 2 rolls of 1kg filament or a 3kg spool, with a maximum capacity of 242 mm diameter by 105 mm high, and its bar spool holder supports 250g and 500g spools and paper spools. The Qacoczme holds 5.8L per box, and the YOOPAI and AMZPro sets are 4.0L.

Sealing and desiccant

A silicone seal around the lid is the common feature: the YOOPAI Pro, YOOPAI and AMZPro all state one, the SUNLU uses two sliding latches and two gaskets, and the Qacoczme uses air-tight connectors. Desiccant counts vary: the YOOPAI 4-pack includes 8 50g packets, the Qacoczme includes 4 50g packets, and the AMZPro includes 4 50g packets. The YOOPAI Pro and Qacoczme state reusable desiccant.

Monitoring

Only two of the five state a way to check humidity: the YOOPAI Pro has a built-in temperature and humidity monitor, and the SUNLU includes a hygrometer and desiccant. The YOOPAI Pro displays temperature in Celsius only.

Feeding the printer from the box

Only the SUNLU and Qacoczme state a way to print from a sealed box: the SUNLU has 6 output holes and 2 lengths of PTFE tube, and the Qacoczme dispenses from a sealed connector on the lid. The YOOPAI 4-pack can be modified for a custom feed setup, per the listing.

Labels and sorting

Three of the five include labels: the YOOPAI 4-pack includes 18 identification labels, the Qacoczme includes 12, and the YOOPAI Pro has printable label slots. The clear bodies on the YOOPAI, YOOPAI Pro and AMZPro boxes show each spool at a glance.

Project Match

  • Printing from a sealed box: SUNLU Filament Dry Box, with 6 output holes and PTFE tubes; Qacoczme Storage Box, with a sealed connector on the lid.
  • Watching humidity at a glance: YOOPAI Pro Box 4-Pack, with a temperature and humidity monitor; SUNLU Filament Dry Box, with a hygrometer.
  • Sorting several spools by color and material: YOOPAI Box 4-Pack, with 18 labels; AMZPro Box 4-Pack, with 4 boxes and a transparent body.
  • Storing 2.85mm filament or nylon and PC: SUNLU Filament Dry Box, the only pick that states 2.85mm and PA and PC.
  • A small setup with two boxes: Qacoczme Storage Box, a 2-pack of 5.8L boxes.

How the scores add up

Each box is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing here states a safety certification, so every box here scores zero on safety; the ranking comes from the other four.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU Filament Dry Box 9.7 32 22 20 n/a 2
YOOPAI Pro Box 4-Pack 9.6 29 21 21 n/a 0
YOOPAI Box 4-Pack 9.6 28 20 21 n/a 0
Qacoczme Storage Box 9.6 28 20 20 n/a 0
AMZPro Box 4-Pack 9.5 27 20 20 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

Do I need a filament dry box for PLA?

Every box here states it fits PLA, and each one seals the spool with desiccant inside to keep moisture out between print sessions.

Can I print straight from a dry box?

Two of the five state it: the SUNLU has 6 output holes and 2 lengths of PTFE tube, and the Qacoczme dispenses from a sealed connector on the lid without opening the box. The YOOPAI 4-pack can be modified for a custom feed setup, per the listing.

What size spool fits in these boxes?

Every box here fits standard 1KG 1.75mm spools. The SUNLU also fits a 3kg spool, with a maximum capacity of 242 mm diameter by 105 mm high, and its bar spool holder supports 250g and 500g spools and paper spools.

How do I know when the desiccant needs recharging?

The YOOPAI Pro shows temperature and humidity on a built-in monitor, and the SUNLU includes a hygrometer. The Qacoczme desiccant turns green when it absorbs moisture and reverts to orange after heating with a hair dryer or oven.

Do these boxes work with PETG and TPU?

Yes: every box here states it fits PETG and TPU, along with PLA and ABS. The SUNLU also states PA and PC.

Related: best filament dry box, filament dryer vs dry box, creality space pi vs sunlu s2 filament dryer and the 3D printers hub. Also see our best filament dryer cabinet. Also see our best basic pla filament with spool. Also see our best pla filament 1 kg.

More buying guides

3D Printers ·

Best Box for Pla Filament (2026)

Dry boxes and organizers for PLA spools, from airtight 6-packs with humidity monitors to fabric organizers that hold 24 spools, compared by capacity, seal…