Esun Petg vs Sunlu Petg: Which One Should You Buy?
SUNLU PETG leads on stated tolerance and print temperatures, while eSUN offers a sealed white spool and a plain black spool.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Official SUNLU PETG Filament 1.75mm, 2kg(4.4lbs)9.7/10View on Amazon - 2
eSUN PETG Filament 1.75mm9.6/10View on Amazon - 3
eSUN PETG Basic Filament 1.75mm9.5/10View on Amazon
A spool of PETG is the workhorse filament for parts that need to bend a little instead of snapping, from cosmetic containers and stationery to toys and electronic accessories. This comparison puts esun petg vs sunlu petg side by side, using what each listing states about tolerance, spool size, print settings and packaging, so the choice comes down to stated facts rather than brand habit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the SUNLU PETG bundle leads on stated precision and print guidance, with +/- 0.02mm tolerance, a 2kg (4.4lbs) bundle and stated nozzle and bed ranges. The eSUN white spool is the pick for a sealed 1KG spool with a stated 350-355m length, while the eSUN PETG Basic black spool is the plainest option, with no stated tolerance or temperatures. Pick SUNLU for volume printing, eSUN white for a single sealed spool, and eSUN Basic for simple black parts.
Machines on the list
| # | Product | HQ Score | Buy |
|---|---|---|---|
| 1 | Official SUNLU PETG Filament 1.75mm, 2kg(4.4lbs) | 9.7/10 | Buy on Amazon |
| 2 | eSUN PETG Filament 1.75mm | 9.6/10 | Buy on Amazon |
| 3 | eSUN PETG Basic Filament 1.75mm | 9.5/10 | Buy on Amazon |

Official SUNLU PETG Filament 1.75mm, 2kg(4.4lbs)
A 2kg (4.4lbs) bundle of black PETG on a reusable spool, with the smallest tolerance of the 3 listings and stated print temperatures.
Pros
- Dimensional accuracy of +/- 0.02mm, the smallest of the 3 listings
- 2kg (4.4lbs) bundle on a reusable spool, with no hub waste per the listing
- Stated print settings: nozzle 220-250°C and bed 65-75°C
- Stated compatibility with Bambulab and MarsWork filament, plus Bambulab AMS and AMS Lite
Cons
- Warranty is 30 days warranty only
- The listing recommends drying the filament before use
- No filament length is stated

eSUN PETG Filament 1.75mm
A 1KG (2.2 LBS) spool of solid white PETG with +/- 0.05mm dimensional accuracy, a stated 350-355m length and vacuum-sealed packaging.
Pros
- Dimensional accuracy of +/- 0.05mm with low warping stated
- Total length of 350-355m stated for the 1KG spool
- Vacuum-sealed packaging with a desiccant bag
- Tangle-free winding with no plugging stated
Cons
- No warranty term is stated
- No print temperatures are stated
- Tolerance is looser than the SUNLU listing at +/- 0.02mm
- Only 1KG per spool, against the 2kg SUNLU bundle

eSUN PETG Basic Filament 1.75mm
A 1KG (2.2 LBS) spool of solid black PETG Basic with a glossy finish, high toughness and no stated tolerance or length.
Pros
- High toughness with impact and deformation resistance stated
- Glossy printing finish with dimensional stability stated
- Wide stated uses: lighting fixtures, electronics, cosmetic containers and stationery
- No shrinkage and warping stated
Cons
- No dimensional accuracy is stated
- No filament length is stated
- No print temperatures are stated
- No warranty term is stated
Other machines to compare
eSUN PETG Basic Filament 1.75mmCheck price on Amazon
eSUN Basic PETG Filament 1.75mmCheck price on Amazon
eSUN PETG 3D Printer Fliament 1.75mmCheck price on Amazon
eSUN PETG 3D Printer Fliament 1.75mm BlackCheck price on Amazon
eSUN PETG Filament 1.75mmCheck price on Amazon
eSUN PETG Basic 3D Printer Filament 1.75mmCheck price on Amazon
esun petg vs sunlu petg side by side
| Spec | SUNLU PETG Black 2kg | eSUN PETG White | eSUN PETG Basic Black |
|---|---|---|---|
| HQ Score | 65 | 58 | 55 |
| Filament | 1.75mm PETG | 1.75mm PETG | 1.75mm PETG |
| Dimensional accuracy | +/- 0.02mm | +/- 0.05mm | Not stated |
| Spool | 2kg (4.4lbs) bundle | 1KG (2.2 LBS) | 1KG (2.2 LBS) |
| Filament length | Not stated | 350-355m | Not stated |
| Nozzle temperature | 220-250°C | Not stated | Not stated |
| Bed temperature | 65-75°C | Not stated | Not stated |
| Spool type | Reusable spool | Not stated | Not stated |
| Warranty | 30 days warranty | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 9 November 2026.
Filament size and tolerance
All 3 listings state 1.75mm filament. Tolerance is where they split: SUNLU states +/- 0.02mm, eSUN white states +/- 0.05mm, and the eSUN Basic listing states no tolerance at all. A tighter stated tolerance means the diameter varies less from the 1.75mm figure, which the eSUN white listing links to consistent feeding and stable prints.
Spool size and length
The SUNLU listing is a 2kg (4.4lbs) bundle in black, on a reusable spool that takes replacement refills. Both eSUN listings are 1KG (2.2 LBS) spools, one solid black and one solid white. Only the eSUN white listing states a filament length, 350-355m for its 1KG spool; the other two listings state no length.
Print settings
Only the SUNLU listing states print temperatures: a nozzle range of 220-250°C and a bed range of 65-75°C, with a note to dry the filament before use for best results. The eSUN listings state no temperatures, so do not carry the SUNLU ranges across to the eSUN spools. The SUNLU listing also recommends drying the filament before use; see the filament dry box guide.
Uses and materials
The eSUN Basic listing names lighting fixtures, electronics, cosmetic containers and stationery, and points to transparent or translucent products such as lighting equipment and high-end packaging containers. The eSUN white listing names toys, stationery, electronic accessories and cosmetic containers, with clarity, light transmission and high gloss. The SUNLU listing keeps its uses general, leaning on toughness, layer adhesion and impact resistance for durable models.
Choose SUNLU PETG if
- You print a lot of PETG and want the smallest stated tolerance at +/- 0.02mm.
- You want stated print temperatures, with a nozzle range of 220-250°C and a bed range of 65-75°C.
- A 2kg (4.4lbs) bundle on a reusable spool fits your printing volume.
Choose eSUN PETG if
- You want a 1KG spool with a stated 350-355m length and vacuum-sealed packaging.
- You want a solid white spool with +/- 0.05mm stated tolerance.
- You want a plain solid black spool with a glossy finish and no extra claims to weigh.
Dry the filament before use, as the SUNLU listing recommends. The eSUN white spool arrives in a sealed vacuum bag with a desiccant bag.
Project Match
- Durable models: the SUNLU bundle, with +/- 0.02mm tolerance and stated temperatures.
- Toys, stationery and cosmetic containers in white: the eSUN white spool, with a stated 350-355m length.
- Cosmetic containers and stationery in black: the eSUN Basic black spool, with high toughness stated.
- Lighting fixtures and translucent designs: the eSUN Basic listing, which names lighting equipment and high-end packaging containers.
FAQ: lasers and CNC
Which PETG is the better buy, eSUN or SUNLU?
For stated precision and print guidance, the SUNLU bundle leads with +/- 0.02mm tolerance and stated nozzle and bed ranges. For a single sealed 1KG spool, the eSUN white spool states a 350-355m length and vacuum-sealed packaging. The eSUN Basic black spool is the plainest of the 3, with no stated tolerance or temperatures.
What nozzle and bed temperatures does the SUNLU listing state?
The SUNLU listing states a nozzle temperature between 220-250°C and a bed temperature between 65-75°C, and recommends drying the filament before use.
How much filament is in each spool?
The SUNLU bundle is 2kg (4.4lbs). Both eSUN spools are 1KG (2.2 LBS). Only the eSUN white listing states a length, 350-355m.
Does eSUN PETG state a dimensional tolerance?
The eSUN white spool states +/- 0.05mm. The eSUN Basic listing states no tolerance.
Does SUNLU PETG work with Bambu Lab AMS?
The SUNLU listing says it can be adapted to Bambulab AMS and AMS Lite, and states compatibility with Bambulab and MarsWork filament.
Related: Polymaker PETG vs SUNLU PETG, Elegoo PETG vs SUNLU PETG, PETG vs carbon fiber PETG and best PETG filament for durable prints.




