Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Petg vs Carbon Fiber Petg: Which One Should You Buy?

Carbon fiber PETG adds strength, rigidity, heat resistance and a matte finish to plain PETG, while asking for a hardened steel nozzle, dry storage and stated print temperatures.

Petg vs Carbon Fiber Petg: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FLASHFORGE AD5X Multi-Color & Material 3D Printer with IFSFLASHFORGE AD5X Multi-Color & Material 3D Printer with IFS9.7/10View on Amazon
  2. 2Polymaker Fiberon PA612-CF15 Carbon Fiber Nylon FilamentPolymaker Fiberon PA612-CF15 Carbon Fiber Nylon Filament9.6/10View on Amazon
  3. 3Mintion 3D Printer Filtration System for Bambu Lab P1S/X1C &Mintion 3D Printer Filtration System for Bambu Lab P1S/X1C &9.6/10View on Amazon
  4. 4ELEGOO Glass Fiber PETG-GF 3D Printer Filament 1.75mm BlackELEGOO Glass Fiber PETG-GF 3D Printer Filament 1.75mm BlackView on Amazon
  5. 5ELEGOO Glass Fiber PETG 3D Printer Filament 1.75mm White 1KGELEGOO Glass Fiber PETG 3D Printer Filament 1.75mm White 1KGView on Amazon
  6. 6ELEGOO Glass Fiber PETG 3D Printer Filament 1.75mm Gray 1KGELEGOO Glass Fiber PETG 3D Printer Filament 1.75mm Gray 1KGView on Amazon
  7. 7FLASHFORGE Carbon Fiber PETG Filament 1.75mmFLASHFORGE Carbon Fiber PETG Filament 1.75mmView on Amazon
  8. 8ANYCUBIC PETG-CF Carbon Fiber 3D Printer Filament 1.75mmANYCUBIC PETG-CF Carbon Fiber 3D Printer Filament 1.75mmView on Amazon
  9. 9SUNLU PETG-CF 3D Printer Filament 1.75mmSUNLU PETG-CF 3D Printer Filament 1.75mmView on Amazon

A bracket that has to hold its shape under load, a drone frame that has to survive a hard landing, a garden tool that has to keep working outdoors. That is the job behind petg vs carbon fiber petg: plain PETG is a tough filament, and carbon fiber PETG is the same base with short-cut carbon fiber mixed in, which the listings say raises strength, rigidity and heat resistance while keeping the impact resistance PETG is known for. The trade is on the printer side: a hardened steel nozzle, dry storage, and the print temperatures the listings state.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Petg vs Carbon Fiber Petg: What Carbon Fiber Changes

Start with what the four listings agree on: every one is a PETG-CF spool, PETG with carbon fiber mixed in, and every one describes the same shift, the fiber adds strength and rigidity. ELEGOO calls its PETG-CF high-strength and rigid, ideal for functional parts and outdoor items. FLASHFORGE says its PETG-CF improves material strength and temperature resistance while keeping the impact resistance of PETG. ANYCUBIC says its PETG-CF offers vastly superior rigidity and impact resistance compared with standard PETG, and SUNLU says its 10% carbon fiber filling imparts excellent strength and rigidity, with an impact strength of 19kJ/㎡.

Where the extra strength shows up

The listings point the fiber at the same kind of work: parts that carry load, take knocks or live outside. ELEGOO names gears, bearings and structural parts that need durability and precise fit, and calls out abrasion resistance and dimensional accuracy. FLASHFORGE names frames, drones, tools and automotive parts, with outstanding rigidity and dimensional stability. ANYCUBIC names functional parts and heavy-duty applications, and SUNLU names the same uses, with a heat distortion temperature up to 70°C for durable outdoor tools.

The finish: matte, satin and fewer layer lines

Carbon fiber also changes how a print looks. ELEGOO says the fiber brings a fine matte texture that reduces visible layer lines. ANYCUBIC says the fiber conceals layer lines and gives a refined satin texture, with more luster than a purely matte PLA-CF surface. SUNLU says its filament delivers a matte surface with a subtle textured grip. All three agree the fiber hides layer lines; ELEGOO and SUNLU describe matte, ANYCUBIC describes satin. For a fiber-to-fiber comparison, see glass fiber vs carbon fiber filament.

What carbon fiber asks of your printer

The listings are specific about the setup PETG-CF needs. ELEGOO recommends a hardened steel nozzle with a diameter of no less than 0.4 mm, a print temperature of 240-270 °C and a hotbed temperature of 65-75 °C. SUNLU recommends a nozzle temperature of 240-250°C, a bed temperature of 50-70°C and a printing speed of 50-150mm/s, with drying at 70°C for 4-6 hours before use and storage in a dry environment. ANYCUBIC states no print temperatures, so the two listings with stated settings are ELEGOO and SUNLU. SUNLU also warns PETG-CF off AMS, AMS Lite, or other multi-color systems, because materials that are too hard and have a rough surface can wear down the feed path. All four listings describe their spools as fitting most FDM 3D printers.

Four PETG-CF spools from the listings

All four are 1.75mm PETG-CF on 1KG spools, ordered from the listing with the most complete stated figures to the one with the most gaps.

SUNLU PETG-CF leads the group on its stated figures: a 10% carbon fiber filling, an impact strength of 19kJ/㎡, a heat distortion temperature up to 70°C and dimensional accuracy of +/- 0.03mm, with print settings of 240-250°C at the nozzle, 50-70°C at the bed and 50-150mm/s. Dry it at 70°C for 4-6 hours; the spools are vacuum sealed with a desiccant pack. It warns PETG-CF off AMS, AMS Lite or other multi-color systems, because the hard, rough surface can wear down the feed path.

FLASHFORGE Carbon Fiber PETG follows, with the smallest stated tolerance in the group at +/- 0.02mm, dried 24 hours before packaging, vacuum sealed with desiccant. It also states a two-month warranty and a 30-day money-back promise. Read two things carefully: the spec table says the warranty description is 1 Year, against the two-month warranty in the bullets, and the bullets call the filament PLA in two places even though the product is PETG-CF. Trusting the title and bullets, this guide counts the warranty as two months.

ELEGOO PETG-CF sits next, with print settings of a hardened steel nozzle with a diameter of no less than 0.4 mm, a print temperature of 240-270 °C and a hotbed temperature of 65-75 °C. It is described as high-strength, rigid and abrasion-resistant, with a fine matte texture that reduces visible layer lines, for gears, bearings and structural parts. It fits most 1.75 mm FDM 3D printers; no warranty term and no dimensional accuracy figure are stated.

ANYCUBIC PETG-CF closes the group. Its listing leans on outdoor use and finish: water and weather resistance that maintains color and texture through prolonged outdoor exposure, warp resistance from an ultra-low shrinkage rate, and a satin carbon fiber texture that conceals layer lines. A reusable spool with a threaded connection system and smart identification chips for ACE Pro round out the listing. Two gaps hold it back: no print temperatures and no dimensional accuracy figure are stated, and one bullet calls the filament PLA-CF even though the product is PETG-CF.

How to pick between them

Pick by the part, not the brand. If the part carries load or takes impacts, SUNLU is the only listing that states an impact strength figure, 19kJ/㎡. Outdoors, ANYCUBIC states water and weather resistance through prolonged outdoor exposure, ELEGOO names outdoor items, and SUNLU states a heat distortion temperature up to 70°C. For finish, ELEGOO and SUNLU describe matte, ANYCUBIC describes satin. Before ordering, check the nozzle: ELEGOO recommends hardened steel at no less than 0.4 mm, and SUNLU warns the filament off AMS and multi-color systems.

FAQ: lasers and CNC

Is PETG-CF stronger than plain PETG?

The listings say yes, on strength and rigidity. ANYCUBIC says its PETG-CF offers vastly superior rigidity and impact resistance compared with standard PETG. SUNLU says short-cut carbon fiber enhances the toughness of PETG and states an impact strength of 19kJ/㎡, and FLASHFORGE says its PETG-CF improves material strength and temperature resistance while keeping PETG’s impact resistance.

Do I need a hardened steel nozzle for PETG-CF?

Two listings recommend one. ELEGOO recommends a hardened steel nozzle with a diameter of no less than 0.4 mm, and SUNLU says its filament runs smoothly with any hardened steel nozzle. FLASHFORGE and ANYCUBIC state no nozzle requirement, so check the listing for the spool you buy.

What temperatures does PETG-CF print at?

Two listings state settings. ELEGOO lists a print temperature of 240-270 °C and a hotbed temperature of 65-75 °C. SUNLU lists a nozzle temperature of 240-250°C, a bed temperature of 50-70°C and a printing speed of 50-150mm/s. FLASHFORGE and ANYCUBIC state no print temperatures.

Can I run PETG-CF through an AMS or a multi-color system?

SUNLU says no: PETG-CF is not recommended for use in AMS, AMS Lite, or other multi-color systems, because materials that are too hard and have a rough surface can wear down the feed path. SUNLU is the only listing that addresses AMS, and its answer is no.

Is PETG-CF good for outdoor parts?

The listings point that way. ANYCUBIC states water and weather resistance that maintains color and texture through prolonged outdoor exposure. ELEGOO calls its PETG-CF ideal for functional parts and outdoor items, and SUNLU states a heat distortion temperature up to 70°C and names durable garden tools.

Does PETG-CF hide layer lines?

The listings say the fiber helps. ELEGOO says the fine matte texture reduces visible layer lines, ANYCUBIC says the carbon fiber conceals layer lines and gives a refined satin texture, and SUNLU says the fibers create a matte surface with a subtle textured grip.

Related: the best PETG filament for durable prints, the best PETG filament for outdoor use, PETG vs PC filament and PLA vs PETG filament. Also see our best filament dryer for PETG.

More buying guides