Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best PETG Filament for Bambu P1S (2026): 5 Compared

Five PETG filaments compared by diameter, spool size, RFID, tolerance and warranty for the Bambu P1S, ranked by HQ Score.

Best PETG Filament for Bambu P1S (2026): 5 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bambu Lab PETGBest OverallBambu Lab PETG9.7/10View on Amazon
  2. 2ANYCUBIC PETGBest Bulk BundleANYCUBIC PETG9.5/10View on Amazon
  3. 3Tecsonar PETG 8-PackBest Small SpoolsTecsonar PETG 8-Pack9.5/10View on Amazon
  4. 4COMTREE PETG BasicBest Bambu RefillCOMTREE PETG Basic9.5/10View on Amazon
  5. 5SUNLU PETGBasic 1 kg PickSUNLU PETG9.6/10View on Amazon

The best petg filament for bambu p1s is the spool that feeds the AMS without a fuss and holds up outdoors once the print leaves the build plate, because a filament that strings, warps or snaps in use wastes the print and the afternoon. PETG sits between PLA and ABS: tougher than PLA for functional parts, easier to print than ABS, and steady in water, UV and temperature changes. We compared the spools in this guide by diameter, spool size, RFID, tolerance and warranty, and ranked them by HQ Score.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Bambu Lab PETG: RFID for AMS, UL GREENGUARD 2904 certified, 1 kg spool Check price on Amazon
  • Best Bulk Bundle ANYCUBIC PETG: 10 kg across 10 colors, twice the impact resistance of standard PLA Check price on Amazon
  • Best Small Spools Tecsonar PETG 8-Pack: 8 spools of 250 g in 8 colors, 1 Year warranty stated Check price on Amazon
  • Best Bambu Refill COMTREE PETG Basic: 1 kg RFID refill for Bambu Lab A1, X1 and P1 series printers Check price on Amazon
  • Basic 1 kg Pick SUNLU PETG: 1.75 mm, 1 kg, Black, less stringing and good layer adhesion stated Check price on Amazon

Machines on the list

Bambu Lab PETG 3D Printer Filament 1.75mm RFID 1kg

Bambu Lab PETG 3D Printer Filament 1.75mm RFID 1kg

Bambu Lab9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm PETG spool with RFID for the Bambu AMS, UL GREENGUARD 2904 certified for low indoor printing emissions.

Pros

  • Built-in RFID lets the Bambu AMS identify the filament and apply matched print settings automatically
  • UL GREENGUARD 2904 certified, with lower particle and VOC emissions for indoor printing
  • Lower moisture sensitivity helps reduce stringing and improve surface quality
  • Stated for water, UV and temperature changes, so it suits outdoor, bathroom and garden prints

Cons

  • No warranty term is stated
  • One color and one spool size in this listing, so multi-color prints need another spool
  • A full 1 kg spool with spool, so it is not a mini spool for color sampling
  • Built for functional prints under stress, so a decorative print gains little from the extra toughness
SUNLU PETG Filament 1.75mm,1kg,Black

SUNLU PETG Filament 1.75mm,1kg,Black

SUNLU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single Black PETG spool with strong layer adhesion, toughness and vacuum packaging, plus stated nozzle and bed settings.

Pros

  • Excellent layer adhesion that reduces warping risk
  • High impact resistance for parts that endure bumps and drops
  • Vacuum packaging keeps the spool moisture-free from factory to printer
  • Diameter accuracy of ±0.02mm for wide printer compatibility

Cons

  • Single 1 kg spool, not a multi-spool pack
  • Only Black is offered in this listing
  • No drying guidance is stated for damp spools
  • No retraction setting is stated
ANYCUBIC PETG Filament 1.75mm

ANYCUBIC PETG Filament 1.75mm

ANYCUBIC9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 kg multicolor PETG bundle on a reusable spool, with impact resistance twice that of standard PLA.

Pros

  • Impact resistance twice that of standard PLA, per the maker
  • 10 kg bundle across Black, White, Texture Grey, Pink, Red, Blue, Green, Orange, Yellow and Purple
  • Controlled wire diameter tolerance of +/-0.02 mm
  • Stated compatible with 99% of FDM 3D printers and 3D printing pens

Cons

  • No warranty term is stated
  • A 10 kg bundle suits bulk printing better than a single-color trial print
  • No RFID is stated, so print settings are not applied automatically
  • Prints appear semi-transparent or fully transparent when illuminated, so the look changes with the light
Tecsonar PETG Filament 1.75mm,250g,8 Packs Multi

Tecsonar PETG Filament 1.75mm,250g,8 Packs Multi

TECSONAR9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Eight 250 g PETG spools in 8 colors, with a 1 Year warranty and heat resistance up to 70°C.

Pros

  • 8 independent 250 g spools in classic solid and translucent shades
  • Heat resistant up to 70°C, with low shrinkage and strong layer adhesion
  • Works directly with Bambu Lab AMS Lite; a 250 g Spool Adapter fits the Bambu Lab AMS
  • 1 Year warranty stated, the only stated warranty term here

Cons

  • Small 250 g spools suit small crafts, not large single-color prints
  • The Bambu Lab AMS needs a 250 g Spool Adapter for proper spool fit
  • Tight tolerance of +/- 0.03 mm, wider than the +/-0.02 mm stated by Anycubic and Sunlu
  • Multi-color bundle format, so a single-color bulk print needs several spools
COMTREE Bamboo PETG Basic Refill Filament 1.75mm 1

COMTREE Bamboo PETG Basic Refill Filament 1.75mm 1

COMTREE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg RFID refill of Bamboo PETG Basic for Bambu Lab A1, X1 and P1 series printers, with PLA-level strength.

Pros

  • RFID embeds all printing parameters for the AMS to read
  • PLA-level strength with PETG toughness for structural and functional parts
  • Stated resistance to water, UV and temperature for outdoor accessories and tools
  • Reduced stringing and smoother surfaces from lower moisture sensitivity

Cons

  • Refill with no spool, so a spool is needed before it feeds the AMS
  • Needs drying before use, and thorough drying after exposure above 50% humidity for more than 72 hours
  • Adheres strongly to the PEI plate, so the plate must cool before the model comes off
  • Matches PLA Basic strength, so it is not stronger than PLA on that measure

Other machines to compare

Specs compared

Filament HQ Score Diameter Spool RFID Tolerance Warranty
Bambu Lab PETG 9.7/10 1.75 mm 1 kg with spool Yes Not stated Not stated
ANYCUBIC PETG 9.5/10 1.75 mm 10 kg, 10 colors Not stated +/-0.02 mm Not stated
Tecsonar PETG 8-Pack 9.5/10 1.75 mm 8 x 250 g Not stated +/- 0.03 mm 1 Year
COMTREE PETG Basic 9.5/10 1.75 mm 1 kg refill, no spool Yes +/- 0.03 mm Not stated
SUNLU PETG 9.6/10 1.75 mm 1 kg Not stated ±0.02 mm Not stated

We give each product’s specs as its manufacturer rates them; listings read 20 November 2026.

How to choose the best petg filament for bambu p1s

Start with RFID if you run the AMS

The Bambu Lab spool carries built-in RFID, so the AMS identifies the filament and applies matched print settings automatically, and the COMTREE refill embeds all printing parameters in RFID for the AMS to read. The Tecsonar spools carry no RFID, and they work directly with AMS Lite, while the Bambu Lab AMS needs the 250 g Spool Adapter for proper fit. The Anycubic bundle and the Sunlu spool state no RFID, so their settings are entered by hand. Matched settings cover nozzle temperature by filament type, so check the 3D printer nozzle temperature guide before the first print with a new spool.

Dry PETG before you print it

PETG picks up moisture from the air, and wet filament strings and bubbles. The COMTREE listing says to dry PETG Basic before use, and to dry it thoroughly after exposure to air above 50% relative humidity for more than 72 hours. The Bambu Lab spool notes lower moisture sensitivity, which helps reduce stringing, and the Tecsonar spools arrive vacuum sealed one by one. A filament dryer earns its keep across many spools, so see the best filament dryer for Bambu guide and how long to dry filament before a long print.

Match the spool size to the print

The Bambu Lab, COMTREE and Sunlu spools are 1 kg each, the Tecsonar set is 8 spools of 250 g, and the Anycubic bundle is 10 kg across many colors. Small spools suit trying out colors, small crafts and multi-color models without opening a full roll, while a 1 kg spool suits a run of functional parts in one color. The COMTREE refill ships with no spool, so it needs a spool before it feeds the AMS. Check the spool format against the AMS or the spool holder before ordering, and keep a spare spool on hand for a refill.

Read the tolerance and the warranty line

Tolerance decides how evenly the filament feeds. The Anycubic and Sunlu listings state plus or minus 0.02 mm, the Tecsonar and COMTREE listings state plus or minus 0.03 mm, and the Bambu Lab listing states no tolerance figure. On warranty, the Tecsonar bundle states a 1 Year warranty and the other listings state no warranty term. A stated tolerance and a stated warranty are both worth checking before ordering, since neither can be added after the spool arrives.

Project Match

  • Outdoor and moisture-prone prints: Bambu Lab PETG and COMTREE PETG Basic, both stated for water, UV and temperature changes.
  • Small crafts and multi-color models: Tecsonar PETG 8-Pack, with 8 colors in 250 g spools.
  • Big multi-color runs: Anycubic PETG bundle, 10 kg in Black, White, Texture Grey, Pink, Red, Blue, Green, Orange, Yellow and Purple.
  • Structural and functional parts: Bambu Lab PETG and COMTREE PETG Basic, both stated for stress and impact.
  • Simple black prints on a 1 kg spool: Sunlu PETG, 1.75 mm, 1 kg, Black.

How the scores add up

The HQ Score weighs performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. For filament, safety means a stated certification or safety-relevant feature; the Bambu Lab spool states UL GREENGUARD 2904 certification, and the Tecsonar and Anycubic spools state non-toxic, low-odor material. A warranty term is stated for the Tecsonar bundle only.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Bambu Lab PETG 9.7 32 22 21 7 0
ANYCUBIC PETG 9.5 30 21 20 3 0
Tecsonar PETG 8-Pack 9.5 28 20 19 3 1
COMTREE PETG Basic 9.5 30 21 21 0 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

FAQ: lasers and CNC

Does the Bambu Lab PETG spool work with the AMS?

Yes. The spool carries built-in RFID, so the Bambu AMS identifies the filament and applies matched print settings automatically. It is listed for AMS and FDM 3D printers.

Do I need a spool adapter for the 250 g Tecsonar spools?

For the Bambu Lab AMS, the listing says to install the 250 g Spool Adapter for proper spool fit and smooth rotation. The spools work directly with Bambu Lab AMS Lite.

Should I dry PETG before printing?

The COMTREE listing says to dry PETG Basic before use, and to dry it thoroughly if it has been exposed to air with relative humidity above 50% for more than 72 hours. The Bambu Lab listing notes lower moisture sensitivity, which helps reduce stringing.

Which of these filaments states a warranty term?

The Tecsonar bundle states a 1 Year warranty. The other listings state no warranty term.

Which filament here is the most heat resistant?

The Tecsonar PETG is stated heat resistant up to 70°C. The Bambu Lab PETG states high temp resistance without a stated figure, so the Tecsonar figure is the only stated temperature.

Can I print PETG on the PEI plate?

The COMTREE listing says PETG Basic adheres strongly to the PEI plate and to wait for the plate to cool down before removing the model.

Related: best filament dryer for Bambu, how long to dry filament, what is PETG CF filament and the 3D printers hub.

More buying guides

3D Printers ·

Best PETG Filament for Bambu A1 (2026)

Five PETG filaments for the Bambu A1, from the RFID refill made for Bambu printers to two-color and single-spool packs, compared by tolerance and…