Best Pei Sheet for Ender 3 (2026)
4 spring steel PEI and PEO plates for Ender 3 printers, from a 235x235mm double-sided PEO and PEI sheet to a 315x310mm plate for the larger Ender 3 models, compared by size, surface and filament range.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallComgrow PEO PEI 235×2359.6/10View on Amazon - 2
Best Double-Sided PEIRETUXEP PEI 235×2359.5/10View on Amazon - 3
Best Cut to FitComgrow PEI 235×2359.5/10View on Amazon - 4
Best for Larger Ender 3 ModelsCreality PEI 315×3109.4/10View on Amazon
A print that lifts off the bed mid-print wastes filament, time and a good design. A PEI sheet gives the first layer something to grip while the print runs, then lets go when the sheet flexes after cooling. This guide compares the best pei sheet for ender 3 printers: spring steel plates with textured PEI and smooth PEO surfaces, in the sizes that fit Ender 3 beds and the larger Ender 3 models.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Comgrow PEO PEI 235×235: Double-sided PEO and PEI on spring steel at 235x235mm, the widest Ender 3 compatibility here, with the PEO surface rated to 120°C. Check price on Amazon
- Best Double-Sided PEI RETUXEP PEI 235×235: Textured PEI on both sides at 235x235mm, with nozzle resistance to 260°C stated and positioning holes for a precise fit. Check price on Amazon
- Best Cut to Fit Comgrow PEI 235×235: Single-sided textured PEI at 235x235mm that the listing states can be cut to any dimension, for Ender 3 and other FDM printers. Check price on Amazon
- Best for Larger Ender 3 Models Creality PEI 315×310: A 315x310mm textured PEI plate for Ender 3 S1 Plus, Ender 3 V3 Plus, K1 Max and K2 Pro, with dual handles and positioning holes. Check price on Amazon
Machines on the list

Ender 3 V3 SE Double Sided PEO PEI Spring Steel
A double-sided spring steel sheet at 235x235mm with a smooth PEO surface and a textured PEI surface, made for Ender 3 and a long list of similar FDM printers.
Pros
- Double-sided: smooth PEO plus textured PEI on spring steel
- 235x235mm size fits Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo and Ender 3 S1
- PEO surface rated to 120°C, with PLA and TPU recommended on that side
- Filament range covers PLA, ABS, ASA, PETG, TPU, Nylon, PA and PC
Cons
- No warranty term in the listing
- Magnetic base inclusion is not clearly stated
- PEO side is recommended for PLA and TPU only
- Matte PEI surface gives prints a matte bottom finish

RETUXEP Double-Sided Textured PEI Sheet
A double-sided textured PEI sheet on spring steel at 235x235mm, with positioning holes and dual handles, sold without a magnetic base.
Pros
- Textured PEI on both sides, so either side can face up
- 235x235mm size fits Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro and Ender 3 V3 models
- Nozzle resistance to 260°C stated, without deformation
- Dual handles and positioning holes for precise installation
Cons
- No magnetic base included
- No warranty term in the listing
- No filament list in the listing
- Title prints the size as 235x235m, missing a letter

Comgrow PEI Sheet Magnetic Flexible Heated Bed
A single-sided textured PEI sheet on spring stainless steel at 235x235mm, with a golden yellow back, made to be cut to any dimension.
Pros
- Textured PEI surface with strong adhesion for PLA, PETG, PEEK and ABS
- 235x235mm size fits Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo and Ender 3 Neo
- Listing states the flexible surface can be cut to any dimension
- Spring stainless steel flexes for easy print removal
Cons
- PEI on a single side only, with no surface to flip to
- No warranty term in the listing
- Title and bullets name different compatible printers

Creality Official K1 Max Build Plate PEI Sheet
A textured PEI sheet on flexible spring steel at 315x310mm, with a golden frosted surface, dual handles and positioning holes, sold without a magnetic base.
Pros
- 315x310mm size fits Ender 3 S1 Plus, Ender 3 V3 Plus, K1 Max and K2 Pro
- Frosted PEI texture for first-layer adhesion across PLA, ABS, ASA, PETG, TPU, PC and PA
- Flexible spring steel core: lift the sheet and flex it to pop prints off
- Flame retardancy and heat resistance stated for the PEI material
Cons
- Does not fit a standard Ender 3 bed at 315x310mm
- No magnetic base included
- No warranty term in the listing
- Magnetic adhesive base is mentioned in the bullets while the title states no magnetic base
Other machines to compare
Comgrow PEI Sheet 235x235mm for Ender 3 Series 3D PrintersCheck price on Amazon
YOOPAI Double-Sided PEI + PEO Sheet and Flexible MagneticCheck price on Amazon
Ender 5 Plus Build Plate Textured PEI Sheet 377x370mm withCheck price on Amazon
RETUXEP Double-Sided Textured PEI Sheet 235x235mCheck price on Amazon
Sahvaim PEI Honeycomb SheetCheck price on Amazon
IdeaFormer-3D X1C P1S P2S A1 PEI Sheet for Bambu Lab 257x257mmCheck price on Amazon
Specs compared
| Model | HQ Score | Surface | Size | Filaments | Ender 3 fit | Magnetic base | Warranty |
|---|---|---|---|---|---|---|---|
| Comgrow PEO PEI 235×235 | 9.6/10 | PEO smooth and PEI textured | 235x235mm | PLA, ABS, ASA, PETG, TPU, Nylon, PA, PC | Ender 3, Pro, V2, V2 Neo, S1, V3 SE, V3 KE | Magnetic build surface | Not stated |
| RETUXEP PEI 235×235 | 9.5/10 | Textured PEI, both sides | 235x235mm | Not stated | Ender 3 Neo, V2 Neo, S1, S1 Pro, V3, V3 SE, V3 KE | No magnetic base | Not stated |
| Comgrow PEI 235×235 | 9.5/10 | Textured PEI, single side | 235x235mm | PLA, PETG, PEEK, ABS | Ender 3, Pro, V2, V2 Neo, Neo | Magnetic build surface | Not stated |
| Creality PEI 315×310 | 9.4/10 | Textured PEI | 315x310mm | PLA, ABS, ASA, PETG, TPU, PC, PA | S1 Plus, V3 Plus, K1 Max, K2 Pro | No magnetic base | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026.
Best pei sheet for ender 3: size comes first
A standard Ender 3 bed takes a 235x235mm sheet, and most of the picks here are that size. The Creality sheet is 315x310mm, made for Ender 3 S1 Plus, Ender 3 V3 Plus, K1 Max and K2 Pro, so it suits the larger models in the Ender 3 family and not a standard Ender 3. Surface is the second decision: textured PEI grips a wide filament range, and the Comgrow double-sided sheet adds a smooth PEO surface rated to 120°C.
Buying guide: PEI sheets for Ender 3
Match the sheet to your bed size
Check the printer model against the listing before ordering. A 235x235mm sheet fits Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 3 Neo, Ender 3 S1 and the Ender 3 V3 models named here. A 315x310mm sheet fits Ender 3 S1 Plus, Ender 3 V3 Plus, K1 Max and K2 Pro. A sheet larger than the bed overhangs the edges and will not sit flat.
Single surface or double-sided
A double-sided sheet carries a surface on each face: smooth PEO and textured PEI on the Comgrow double-sided sheet, textured PEI on both faces of the RETUXEP sheet. A single-sided sheet carries textured PEI on the front face with a golden yellow back. The spare face matters when a surface wears or when a print needs a smooth bottom.
Filament range
Check the filament list before ordering. The Creality and Comgrow double-sided sheets name PLA, ABS, ASA, PETG, TPU, PC and PA, with the Comgrow sheet adding Nylon, while the Comgrow single-sided sheet names PLA, PETG, PEEK and ABS. The RETUXEP listing names no filaments, so treat its filament range as not stated rather than assuming a match.
Magnetic base: check before you buy
The Creality 315x310mm sheet and the RETUXEP sheet state plainly that no magnetic base is included, so the base must already be on the printer. The Comgrow listings describe a magnetic build surface without clearly stating that a base is in the box, so confirm before ordering.
Project Match
Pair the sheet with the project, not the other way around:
- Everyday PLA and PETG prints on a standard Ender 3: Comgrow PEO PEI 235×235, with a smooth PEO face and a textured PEI face in a single sheet.
- ABS, ASA, PC, PA and Nylon on a standard Ender 3: Comgrow PEO PEI 235×235, which names the widest filament range here, or RETUXEP PEI 235×235 where the listing states nozzle resistance to 260°C.
- Large-format prints on an Ender 3 S1 Plus or Ender 3 V3 Plus: Creality PEI 315×310, the only 315x310mm sheet here.
- A sheet to cut down for another build size: Comgrow PEI 235×235, which the listing states can be cut to any dimension.
- Not stated: which sheet suits a printer outside the compatibility lists here, since the listings name specific models only.
How the scores add up
Each sheet is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Comgrow PEO PEI 235×235 | 9.6 | 30 | 21 | 21 | 5 | 0 |
| RETUXEP PEI 235×235 | 9.5 | 29 | 21 | 20 | 5 | 0 |
| Comgrow PEI 235×235 | 9.5 | 28 | 20 | 20 | 3 | 0 |
| Creality PEI 315×310 | 9.4 | 27 | 20 | 18 | 4 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What size PEI sheet fits an Ender 3?
A 235x235mm sheet fits a standard Ender 3 and the Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 3 Neo, Ender 3 S1 and Ender 3 V3 models named here. The larger Ender 3 S1 Plus and Ender 3 V3 Plus take a 315x310mm sheet, such as the Creality pick.
What is the difference between PEI and PEO surfaces?
PEI is a textured coating with strong first-layer adhesion across a wide filament range. PEO is a smooth coating; on the Comgrow double-sided sheet the PEO surface is rated to 120°C, and the listing recommends PLA and TPU on that side. A double-sided sheet gives both surfaces in a single plate.
Does a PEI sheet need a magnetic base?
A spring steel PEI sheet holds to the bed through a magnetic base. The Creality and RETUXEP sheets state that no magnetic base is included, so the base must already be on the printer. The Comgrow listings describe a magnetic build surface without clearly stating that a base is in the box.
Which filaments stick to a PEI sheet?
The listings here name PLA, ABS, ASA, PETG, TPU, PC and PA on the Creality sheet, with Nylon added on the Comgrow double-sided sheet and PEEK on the Comgrow single-sided sheet. The RETUXEP listing names no filaments, so its range is not stated.
How do I remove a print from a PEI spring steel sheet?
Let the surface cool, lift the sheet from the heated bed and flex it slightly. The print pops off without scraping or prying, and the sheet returns to a flat shape for the next print.
Related: best nozzle for Ender 3, best build plate for PETG, best build plate for TPU, best 3D printer bed adhesive and the 3D printer sizes guide. Also see the best heat resistant 3D printer filament.




