Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Nozzle for Ender 3 (2026): 5 Picks Compared and Scored

Five nozzles for the Ender 3, from a 2-piece unicorn kit rated for 600 mm/s printing to 25 and 30 piece brass MK8 sets with cleaning tools.

Best Nozzle for Ender 3 (2026): 5 Picks Compared and Scored
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality K1 SE UnicornTop pickCreality K1 SE Unicorn9.7/10View on Amazon
  2. 2Creality Hardened MK8Best hardened steel MK8Creality Hardened MK89.6/10View on Amazon
  3. 3Comgrow MK8 Brass 25Best value packComgrow MK8 Brass 259.6/10View on Amazon
  4. 4JUNYAOHSU MK8 Brass 30Biggest packJUNYAOHSU MK8 Brass 309.6/10View on Amazon

A clogged or worn nozzle shows up in the print: lines that skip, layers that separate, a base layer that will not stick. On an Ender 3, the nozzle is the part that wears out with use, and swapping it is the quickest way back to clean prints. This guide compares the best nozzle for ender 3 across listings from a high-flow unicorn kit to brass MK8 packs with cleaning tools, using only what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Top pick Creality K1 SE Unicorn: Integrated unicorn nozzle in copper alloy and hardened steel, rated to 30 mm3 flow at 240° and 600 mm/s printing. Check price on Amazon
  • Best hardened steel MK8 Creality Hardened MK8: Hardened steel MK8 nozzles rated to 450°C, for composite filaments with grinding additives. Check price on Amazon
  • Best value pack Comgrow MK8 Brass 25: 25 brass nozzles with 10 cleaning needles, a hex wrench, tweezers and a storage box. Check price on Amazon
  • Biggest pack JUNYAOHSU MK8 Brass 30: 30 brass nozzles with 10 cleaning needles, tweezers, a hex wrench and a transparent case. Check price on Amazon

Machines on the list

Creality K1 SE Nozzles, Upgrade K1C Unicorn 3D

Creality K1 SE Nozzles, Upgrade K1C Unicorn 3D

Creality9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An integrated unicorn nozzle kit in copper alloy and hardened steel, with a titanium alloy heat break and a 0.4 mm bore.

Pros

  • Rated for up to 30 mm3 flow at 240° and 600 mm/s printing
  • Copper alloy and hardened steel bimetallic nozzle with a titanium alloy heat break
  • Supports PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF and PET-CF
  • All-metal integrated design for swift installation and easy replacement

Cons

  • Only 2 pieces in the kit
  • Compatibility list names Ender 3 V3 models and the K1 series, not the older Ender 3 models
  • No warranty term is stated
  • No filament input diameter is stated
Official Creality High-end Hardened Steel MK8

Official Creality High-end Hardened Steel MK8

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece set of official Creality hardened steel MK8 nozzles, rated to 450°C for composite filaments.

Pros

  • Hardened steel, rated to 450°C for high-temperature printing
  • Lists PLA, ABS, PETG, TPE, TPU and PC, plus composites with carbon fiber, glass fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments
  • Size engraved on each nozzle for easy identification
  • Rounded chamfer to avoid blocking the filament

Cons

  • Only 8 pieces in the set
  • No warranty term is stated
  • No cleaning tools or storage box are listed
  • No flow rate is stated
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM

Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM

Comgrow9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-piece set of brass MK8 nozzles with 10 cleaning needles, a hex wrench, tweezers and a storage box.

Pros

  • 25 brass nozzles with a 0.4 mm bore and 1.75 mm input diameter
  • Diameter error less than 0.02 mm, with a smooth inner wall
  • 10 cleaning needles, a hex wrench and tweezers in the box
  • Storage box for carrying and storing small accessories

Cons

  • Filament list names PLA and ABS only
  • No warranty term is stated
  • No max temperature or flow rate is stated
  • No size marking is stated on the nozzles
JUNYAOHSU 30PCS MK8 Ender 3 V2 Nozzles 0.4MM

JUNYAOHSU 30PCS MK8 Ender 3 V2 Nozzles 0.4MM

JUNYAOHSU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece set of brass MK8 nozzles with 10 cleaning needles, tweezers, a hex wrench and a transparent case.

Pros

  • 30 brass nozzles with a 0.4 mm bore and 1.75 mm channels
  • Tolerance under 0.02 mm, per the listing
  • 10 stainless steel cleaning needles with tweezers and a hex wrench
  • Compact transparent case for the nozzles and tools

Cons

  • No warranty term is stated
  • No max temperature or flow rate is stated
  • Filament list names PLA, ABS, PETG and TPU only
16Pcs Ender 3 Nozzles 0.4mm

16Pcs Ender 3 Nozzles 0.4mm

TIEXYE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece set of brass MK8 nozzles with a 0.4 mm bore, an M6 thread and a 1.75 mm input diameter.

Pros

  • 16 brass nozzles with a 0.4 mm bore and an M6 thread
  • Diameter error less than 0.02 mm, with a smooth inner wall
  • Fits Ender 2, Ender 3 and Ender 5 models plus the CR-10 series and MK8 Makerbot Reprap Prusa I3
  • Brass with abrasion resistance, heat resistance and corrosion resistance, per the listing

Cons

  • No cleaning tools or storage box are listed
  • No warranty term is stated
  • Filament list names PLA and ABS only

Other machines to compare

Specs compared

Model HQ Score Nozzle Pack Material Rated flow Filament Warranty
Creality K1 SE Unicorn 9.7/10 0.4 mm unicorn 2 Copper alloy + hardened steel Up to 30 mm3 at 240° PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF Not stated
Creality Hardened MK8 9.6/10 MK8, diameter not stated 8 Hardened steel Not stated PLA, ABS, PETG, TPE, TPU, PC, composites Not stated
Comgrow MK8 Brass 25 9.6/10 0.4 mm MK8 25 Brass Not stated PLA, ABS (1.75 mm) Not stated
JUNYAOHSU MK8 Brass 30 9.6/10 0.4 mm MK8 30 Brass Not stated PLA, ABS, PETG, TPU Not stated
TIEXYE MK8 Brass 16 9.6/10 0.4 mm MK8 16 Brass Not stated PLA, ABS (1.75 mm) Not stated

We give each product’s specs as its manufacturer rates them; listings read 5 November 2026.

How the picks were scored

Each nozzle is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Creality K1 SE Unicorn 9.7 33 22 19 n/a 0
Creality Hardened MK8 9.6 30 22 20 n/a 0
Comgrow MK8 Brass 25 9.6 29 21 21 n/a 0
JUNYAOHSU MK8 Brass 30 9.6 28 20 22 n/a 0
TIEXYE MK8 Brass 16 9.6 28 20 21 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

Most picks here are MK8 nozzles

Four of the five picks are MK8 nozzles, and four state a 0.4 mm bore. Three of the MK8 sets are brass: the Comgrow, TIEXYE and JUNYAOHSU sets. The fourth MK8 set is the Creality hardened steel set, which states no diameter. The fifth pick is the Creality unicorn nozzle, an integrated nozzle with the heat break built in, for Ender 3 V3 models and the K1 series. Pack sizes run from 2 pieces to 30 pieces, and the two largest brass sets include cleaning needles, a hex wrench, tweezers and a storage box or case.

Buying guide: best nozzle for Ender 3

Match the nozzle to your Ender 3 model

The MK8 nozzles fit the older Ender 3 models: the Comgrow set lists Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5 Pro, Ender 3 S1, Ender 3 S1 Pro and Ender 3 Neo, and the TIEXYE set adds Ender 2 and Ender 5. The Creality unicorn nozzle fits Ender 3 V3, Ender 3 V3 Plus, Ender 3 V3 KE and Ender 3 V3 SE, plus the K1, K1C, K1 Max, K1 SE and K2 SE. Check the model list on the listing before ordering, since an MK8 nozzle and a unicorn nozzle do not fit the same printers.

Brass or hardened steel

The brass sets list PLA and ABS, with the JUNYAOHSU set adding PETG and TPU. Hardened steel suits composite filaments with grinding additives: the Creality hardened steel set lists carbon fiber, glass fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments, and is rated to 450°C. The unicorn nozzle pairs copper alloy with hardened steel and lists PLA-CF, PA-CF and PET-CF among its filaments. Match the material to the filaments the listing names.

Pack size and spare tools

Pack sizes here are 2, 8, 16, 25 and 30 pieces. The 25-piece Comgrow set and the 30-piece JUNYAOHSU set each include 10 cleaning needles, a hex wrench and tweezers, with a storage box in the Comgrow set and a transparent case in the JUNYAOHSU set. The 8-piece Creality hardened steel set has the size engraved on each nozzle. The 2-piece unicorn kit has no cleaning tools listed. A larger pack suits a printer that swaps nozzles often; a smaller pack suits a printer that needs one material-specific nozzle.

Nozzle bore and filament diameter

Four of the five picks state a 0.4 mm bore, and the Creality hardened steel set states no diameter. The three brass MK8 sets state a 1.75 mm filament input diameter and a diameter error of less than 0.02 mm. The unicorn nozzle states no input diameter. For more on choosing a bore, see the 3D printer nozzle size guide.

Safety

A nozzle swap means working near a hot hotend, so let the printer cool before touching the nozzle or the heater block. Printing ABS and composite filaments makes fumes, so vent the room or run an enclosure with extraction. Never print PVC or vinyl filament.

Project Match

  • PLA and ABS prints on an Ender 3, Ender 3 Pro, Ender 3 V2 or Ender 3 Max: the Comgrow, TIEXYE or JUNYAOHSU brass MK8 sets.
  • Composite filaments with carbon fiber, glass fiber or wood: the Creality hardened steel MK8 set, rated to 450°C.
  • High-speed printing on an Ender 3 V3, Ender 3 V3 Plus, Ender 3 V3 KE or Ender 3 V3 SE: the Creality unicorn nozzle, rated for 600 mm/s printing.
  • PLA, ABS, PETG, TPU, PP, PC and carbon fiber filled filaments on a K1 or Ender 3 V3 series machine: the Creality unicorn nozzle.

FAQ: lasers and CNC

Will an MK8 nozzle fit an Ender 3?

MK8 nozzles fit Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5 Pro, Ender 3 S1, Ender 3 S1 Pro and Ender 3 Neo, per the Comgrow listing. The unicorn nozzle fits Ender 3 V3, Ender 3 V3 Plus, Ender 3 V3 KE and Ender 3 V3 SE instead, so check the model list on the listing.

What size nozzle do Ender 3 printers use?

Four of the five picks state a 0.4 mm bore. The three brass MK8 sets state a 1.75 mm filament input diameter, and the Creality hardened steel set states no diameter.

When is a hardened steel nozzle needed?

Only if you print composite filaments with grinding additives such as carbon fiber, glass fiber or wood. The Creality hardened steel set lists those filaments and is rated to 450°C. Brass covers PLA, ABS, PETG and TPU, the filaments the brass listings name.

How many nozzles come in a pack?

Pack sizes here are 2, 8, 16, 25 and 30 pieces. The 25 and 30 piece sets include 10 cleaning needles each, plus a hex wrench and tweezers. The 8-piece hardened steel set has the size engraved on each nozzle.

What is a unicorn nozzle?

A unicorn nozzle has the heat break built into the nozzle as an all-metal integrated piece. The Creality listing states a titanium alloy heat break with a copper alloy and hardened steel bimetallic nozzle, for swift installation and easy replacement.

Related: best 3D printing nozzle, best 3D PLA filament, 3D printer filament types and the 3D printer nozzle size guide. Also see 3D printer maintenance. Also see best heat resistant 3D printer filament.

More buying guides

3D Printers ·

Best Pei Sheet for Ender 3 (2026)

4 spring steel PEI and PEO plates for Ender 3 printers, from a 235x235mm double-sided PEO and PEI sheet to a 315x310mm plate for…