Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

3D Printer Sizes: Build Volume and Dimensions Guide

3d printer sizes mean two things: the outer dimensions of the machine and the build volume inside it, and the listing in this guide states one but not the other.

3D Printer Sizes: Build Volume and Dimensions Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1XIFOWE MK8 Nozzles 24 pcs Assorted Sizes 3D Printer ExtrudersXIFOWE MK8 Nozzles 24 pcs Assorted Sizes 3D Printer Extruders9.6/10View on Amazon
  2. 2Leifide 50 Pieces 3D Printer Nozzle Cleaning Kit Includes 19Leifide 50 Pieces 3D Printer Nozzle Cleaning Kit Includes 199.6/10View on Amazon
  3. 3FLASHFORGE Adventurer 5M NozzleFLASHFORGE Adventurer 5M Nozzle9.6/10View on Amazon

A maker with a shelf of figures to print, a replacement knob for a drawer, and a prototype for a client all face the same question before ordering: will the machine fit the desk, and will the print fit the machine? 3d printer sizes come in two measures: the outer dimensions of the machine and the build volume inside it. The listing in this guide states the outer dimensions but no build volume figure, so this guide explains how to read both measures and what to check before ordering.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

No build volume figure is stated in the listing, so this guide gives none. Outer dimensions and build volume are different measures, and only the outer dimensions are stated here.

3d printer sizes: the two measures that matter

Outer dimensions are the size of the machine itself: length, width and height of the box that sits on the desk. Build volume is the space inside where the print happens, and it is always smaller than the outer dimensions because the frame, the chamber walls and the moving parts take up room. The listing in this guide states the outer dimensions as 19.7 by 22.0 by 20.0 in, and the weight as 17.6 lb. It states no build volume, so no maximum print size can be given from this listing. That gap matters: a printer with large outer dimensions can still have a modest build volume, and the only figure that tells you what fits inside is the build volume itself.

What the listing states

The listing describes a desktop FDM printer with a touchscreen display on top, an enclosed build chamber, multi-color printing and a rigid metal frame with dual vertical support columns. The touchscreen handles navigation, print monitoring and settings. The enclosed chamber helps maintain consistent temperatures for improved print quality and reduced warping, per the listing. The table below sets out the stated figures.

Figure Stated value
Outer dimensions 19.7 by 22.0 by 20.0 in
Weight 17.6 lb
Printer type Desktop FDM
Build chamber Enclosed
Display Touchscreen
Printing Multi-color
Frame Aluminum, dual vertical support columns
Build volume Not stated
Warranty Not stated

Two figures need a note. The listing states no build volume, so the table reads “Not stated” there: the outer dimensions do not tell you the print size. The warranty field in the spec table reads “3” with no unit, so no warranty term is stated either.

How to measure the spot for the printer

Measure the desk or shelf in three dimensions and compare each one with the outer dimensions: 19.7 by 22.0 by 20.0 in. The spot needs room for the full machine, not just the footprint, because the height matters as much as the length and width. Leave room for the chamber door to open and for the touchscreen on top to be reached. The printer weighs 17.6 lb, so the desk or stand needs to hold that weight with the machine running. Give the printer ventilation: an enclosed chamber holds heat in, so the room needs fresh air, and the printer should sit where fumes can leave the room.

Enclosed or open

The listing’s chamber is fully enclosed, and the maker says the enclosed design helps maintain consistent temperatures for improved print quality and reduced warping. The enclosed design is the maker’s answer to temperature swings during a print. The trade-off is access: the door needs room to open, and the touchscreen sits on top, so the printer needs clearance above it as well as around it. For the comparison, see the enclosed vs open 3d printer guide.

What size print fits

Without a stated build volume, no maximum print size can be given. The outer dimensions do not tell you the print size: the build volume is the space inside the chamber, and it is smaller than the outer dimensions. Before ordering, check the listing for a build volume figure stated in three dimensions, and compare the model with the build volume in all three dimensions. A model that is bigger than the build volume in every orientation needs to be printed in parts or scaled down. For large models, see the best large volume 3d printer guide.

Common mistakes to avoid

  • Reading the outer dimensions as the print size. The build volume is the figure that decides what fits, and it is smaller than the outer dimensions.
  • Ordering without checking for a stated build volume. If the listing does not state one, ask the maker before ordering.
  • Forgetting the door. An enclosed printer needs room for the chamber door to open and for the touchscreen on top to be reached.
  • Forgetting ventilation. An enclosed chamber holds heat in, so the room needs fresh air while the printer runs.
  • Putting the printer where it cannot stay level and steady. A rigid metal frame helps stability, but the desk still needs to hold the printer steady while it prints.

3d printer sizes: the short version

  1. Outer dimensions are the size of the machine; build volume is the space inside where the print happens.
  2. The listing states outer dimensions of 19.7 by 22.0 by 20.0 in and a weight of 17.6 lb, with no build volume stated.
  3. Measure the spot in three dimensions and leave room for the door and the touchscreen.
  4. Check the build volume in the listing before ordering, and compare it with the model.
  5. Ventilate the room while the printer runs.

FAQ: lasers and CNC

What is the difference between a 3d printer’s size and its build volume?

The size is the outer dimensions of the machine, and the build volume is the space inside where the print happens. The build volume is always smaller than the outer dimensions.

How big is a desktop 3d printer?

The listing in this guide states outer dimensions of 19.7 by 22.0 by 20.0 in and a weight of 17.6 lb. Other desktop printers vary, so check the listing for the model in question.

Does an enclosed 3d printer need extra space?

Yes. Room for the chamber door to open, and on this printer, for the touchscreen on top to be reached. The listing states no clearance figure, so measure the door swing on the machine itself.

What should I check before ordering a 3d printer?

Check the build volume in the listing, compare the outer dimensions with the spot where the printer will sit, and check the weight against the desk or stand. The listing in this guide states no build volume, so that figure needs asking the maker about.

Can a desktop 3d printer make large models?

Only up to its build volume, which the listing in this guide does not state. A model bigger than the build volume in every orientation needs to be printed in parts or scaled down. See the best large volume 3d printer guide for larger machines.

Related: the 3d printer hub, the 3d printer types guide, and the enclosed vs open 3d printer guide. Also see the FDM vs resin 3d printer guide and the best beginners 3d printer guide.

More buying guides

Craft Machines ·

DTF Printer Sizes: Bed Dimensions Guide

This guide covers A3 and A3+ DTF printer sizes, and the size to pick is the one whose stated print width covers your largest…

3D Printers ·

PTFE Tubing Sizes Chart for 3D Printers

PTFE tubing sizes for 1.75mm filament, with inner and outer diameters, lengths, fittings and temperature figures for four Bowden tubes.

3D Printers ·

M4 Heat Set Insert Hole Size Chart

The M4 heat set insert hole size is 5mm, matched to the outside diameter of the M4 insert, with a full size chart and…