Best Pei Sheet for Ender 3 Under $20 (2026)
Five 235x235 mm PEI sheets for Ender 3 under 20, compared by coating, magnetic base, filaments and fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallIdeaFormer IR3 PEI9.7/10View on Amazon - 2
Best Official CrealityCreality S1 Pro PEI9.6/10View on Amazon - 3
Best ValueCreality V3 SE PEI9.6/10View on Amazon - 4
Best Cut to SizeComgrow PEI 2359.6/10View on Amazon
A print that lifts off the bed halfway through, a layer that will not stick, a part that warps at the corners: each is a bed problem, and a PEI sheet is the fix most printer owners reach for. The best pei sheet for ender 3 under 20 is a flexible spring steel sheet with a textured PEI coating and a magnetic base, and this guide compares the sheets below by coating, magnetic base, filaments and fit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Affiliate disclosure.
Quick picks
- Best Overall IdeaFormer IR3 PEI: Double-sided textured PEI, 235×235 mm, with a magnetic base and stated temperature limits. Check price on Amazon
- Best Official Creality Creality S1 Pro PEI: Official Creality sheet with dual handles and positioning holes for Ender 3 and Ender 5. Check price on Amazon
- Best Value Creality V3 SE PEI: Official Creality textured PEI sheet with a magnetic base for Ender 3, Ender 5 and K1. Check price on Amazon
- Best Cut to Size Comgrow PEI 235: Magnetic PEI sheet with 3M adhesive that can be cut to any size. Check price on Amazon
Machines on the list

IdeaFormer Double Sided Textured PEI Build Plate
Double-sided textured PEI sheet, 235x235 mm, on spring steel with a magnetic base, for Ender 3, Ender 5, Neptune 3 Pro and Aquila printers.
Pros
- Double-sided textured PEI, prints on both faces
- States temperature limits: PEI 260 degrees C, magnet 80 degrees C
- Lists PLA, ABS, PETG, TPU and Nylon filaments
- Fits Ender 3, Ender 5, Neptune 3 Pro and Aquila
Cons
- No warranty term is stated
- No safety certification is stated
- PETG bed range of 80 to 85 degrees C runs past the magnet limit of 80 degrees C
- No printing area stated, only the sheet size

Official Creality Ender 3 S1 Pro Build Plate Kit
Official Creality textured PEI sheet, 235x235 mm, on spring steel with a magnetic base, dual handles and positioning holes, for Ender 3, Ender 5, K1 and more.
Pros
- Official Creality sheet for the Ender 3 S1 Pro
- Dual handles and positioning holes for accurate alignment
- Printing area of 220x220 mm stated
- Fits Ender 3, Ender 5, K1, CR-20 and more
Cons
- No warranty term is stated
- No safety certification is stated
- No filament list stated
- No temperature limits stated

Creality Official Ender 3 V3 SE Build Plate Spring
Official Creality textured PEI sheet, 235x235 mm, on spring steel with a magnetic sticker, for Ender 3, Ender 5, K1 and other same-sized beds.
Pros
- Official Creality sheet for the Ender 3 V3 SE
- High-flatness spring steel that stays flat after bending
- Strong magnetic adhesion at high temperatures, per the listing
- Wide fit list, from Ender 3 to K1
Cons
- No warranty term is stated
- No safety certification is stated
- No filament list stated
- No temperature limits stated

Comgrow PEI Sheet 235x235mm for Ender 3 Series 3D
Magnetic PEI sheet, 235x235 mm, with a 3M adhesive base that can be cut to any size, for Ender 3, Neptune, Kobra and Aquila printers.
Pros
- Can be cut to any size for any FDM printer
- Magnetic surface lifts off and bends to release prints
- 3M adhesive base, high strength and reusable
- Fits Ender 3, Neptune, Kobra, CR 20 and Aquila
Cons
- No warranty term is stated
- No safety certification is stated
- No filament list stated
- No temperature limits stated

ELEGOO 235x235mm PEI Sheet Magnetic Build Plate
ELEGOO magnetic build plate, 235x235 mm, with a sprayed one-sided PEI coating on spring steel, for the Neptune 3 Pro and most 235 mm beds.
Pros
- Original spare part for the Neptune 3 Pro
- Powder-coated PEI for bed adhesion and less warping
- Flexible steel bends to release prints
- Installs by placing the magnetic bottom sheet on the heated bed
Cons
- One-sided PEI coating, no second face to flip to
- No warranty term is stated
- No filament list stated
- No temperature limits stated
Other machines to compare
RETUXEP Double-Sided Textured PEI Sheet 235x235mCheck price on Amazon
Comgrow PEI Sheet Magnetic Flexible Heated BedCheck price on Amazon
YOOPAI Double-Sided PEI + PEO Sheet and Flexible MagneticCheck price on Amazon
Tapsi 468MP Double Sided Adhesive Transfer Tape SheetsCheck price on Amazon
Specs compared
| Model | HQ Score | Size | PEI sides | Magnetic base | Filaments stated | Fit | Warranty |
|---|---|---|---|---|---|---|---|
| IdeaFormer IR3 PEI | 9.7/10 | 235×235 mm | Double-sided | Yes | PLA, ABS, PETG, TPU, Nylon | Ender 3, Ender 5, Neptune 3 Pro, Aquila | Not stated |
| Creality S1 Pro PEI | 9.6/10 | 235×235 mm | Not stated | Yes | Not stated | Ender 3, Ender 5, K1, CR-20 | Not stated |
| Creality V3 SE PEI | 9.6/10 | 235×235 mm | Not stated | Yes | Not stated | Ender 3, Ender 5, K1, CR-10 SE | Not stated |
| Comgrow PEI 235 | 9.6/10 | 235×235 mm | Not stated | Yes, 3M adhesive | Not stated | Ender 3, CR 20, Neptune, Kobra, Aquila | Not stated |
| ELEGOO PEI 235 | 9.5/10 | 235×235 mm | One-sided | Yes, adhesive | Not stated | Neptune 3 Pro, most 235 mm beds | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the PEI listings tell you
We read five PEI sheet listings. All five are 235×235 mm sheets with a magnetic base. The IdeaFormer, both Creality sheets and the Comgrow name the Ender 3, and the ELEGOO fits most printers with a 235 mm bed. One is double-sided, one is one-sided, and the other sheets do not state the coating sides. One states temperature limits for the PEI and the magnet, and none states a warranty term.
Buying guide: best pei sheet for ender 3 under 20
Size and fit
All five sheets are 235×235 mm, the Ender 3 bed size. Measure your heated bed before you buy, since the IdeaFormer listing asks buyers to check the size. The Creality S1 Pro sheet is 235×235 mm with a printing area of 220×220 mm.
Double-sided or one-sided
A double-sided sheet prints on both faces, so you flip it when one side wears. The IdeaFormer is double-sided, the ELEGOO is one-sided, and the other sheets do not state the coating sides.
Filaments and bed temperature
The IdeaFormer lists PLA, ABS, PETG, TPU and Nylon, and states the PEI coating withstands 260 degrees C and the magnetic sticker 80 degrees C. For PETG it gives a bed temperature of 80 to 85 degrees C, with a highest temperature of 120 degrees C. The other listings do not state filament lists or temperature limits.
Magnetic base and install
Each sheet here sticks to the heated bed with a magnetic sticker or adhesive base. The Creality sheets ask you to align the magnetic sticker on the heated bed first, then set the steel sheet on it. The Comgrow base uses 3M adhesive and the surface can be cut to any size.
Removing prints
A flexible steel sheet pops prints off by bending. Let the bed cool, lift the sheet off and bend it gently, and the print releases. The IdeaFormer and ELEGOO listings both describe bending the sheet to remove prints.
Let the heated bed cool before you lift the sheet and bend it to pop a print off, and keep fingers clear of the hot surface. The IdeaFormer listing states the magnetic sticker withstands 80 degrees C and the PEI coating 260 degrees C, so the bed stays hot long after a print ends.
Project Match
- PLA prints on an Ender 3: the IdeaFormer, which lists PLA among its filaments.
- PETG prints: the IdeaFormer, which gives a bed temperature of 80 to 85 degrees C for PETG.
- TPU or Nylon prints: the IdeaFormer, which lists TPU and Nylon.
- A Neptune 3 Pro: the ELEGOO, made for the Neptune 3 Pro, or the IdeaFormer, which names it.
- A bed that is not 235 mm: the Comgrow, which can be cut to any size.
How the scores add up
Each sheet is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For PEI sheets, safety points come from stated safety features or certifications, and none of the sheets here states one. A warranty earns points only with a concrete term, and none of the sheets here states one.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| IdeaFormer IR3 PEI | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Creality S1 Pro PEI | 9.6 | 30 | 22 | 20 | n/a | 0 |
| Creality V3 SE PEI | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Comgrow PEI 235 | 9.6 | 28 | 20 | 20 | n/a | 0 |
| ELEGOO PEI 235 | 9.5 | 27 | 20 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
Will a 235×235 mm PEI sheet fit my Ender 3?
Yes, if your bed is 235×235 mm. The IdeaFormer, both Creality sheets and the Comgrow name the Ender 3, and the ELEGOO fits most printers with a 235 mm bed. Measure your heated bed before you buy, as the IdeaFormer listing asks.
What is the difference between a one-sided and a double-sided PEI sheet?
A double-sided sheet prints on both faces, so you flip it when one side wears. The IdeaFormer is double-sided and the ELEGOO is one-sided. The other sheets do not state the coating sides.
Which filaments work on a PEI sheet?
The IdeaFormer lists PLA, ABS, PETG, TPU and Nylon. The other listings do not state a filament list, so check the listing for your filament before you buy.
How do I remove a print from a PEI sheet?
Let the bed cool, lift the sheet off the heated bed and bend it gently. The print pops off without tools. The IdeaFormer and ELEGOO listings both describe bending the sheet to remove prints.
Do I need to replace the magnetic base?
The magnetic sticker or adhesive base stays on the heated bed, and the steel sheet lifts off it. The Creality sheets include one magnetic sticker, and the Comgrow base uses 3M adhesive.
Related: the best PEI sheet for Ender 3, the best nozzle for Ender 3, the best 3D printer bed adhesive and our 3D printers hub.




