Best Timing Belt for Ender 3 (2026): 5 Picks Compared
5 timing belts for the Ender 3, from a pre-cut X and Y kit to open 2M and 5M lengths with copper sleeves, compared by fit and materials.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCNZTHDY 5M Belt9.7/10View on Amazon - 2
Best Pre-Cut KitTIEXYE Ender 3 XY Kit9.6/10View on Amazon - 3
Best for MaterialsHanglife GT2 2M9.6/10View on Amazon - 4
Best Gates BeltCreality Gates 2M9.6/10View on Amazon - 5
Best Creality OriginalCreality 2M Belt9.6/10View on Amazon
A print that shifts a layer sideways mid-job usually points at the belt, and a worn belt turns clean lines into wavy walls. The best timing belt for ender 3 restores the motion the printer was built for, and this guide compares belts on length, width, pitch, material and fit. A pre-cut kit covers the X and Y axes, and the rest are open lengths to cut, with copper sleeves to join the ends.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall CNZTHDY 5M Belt: 5M GT2 belt with 10 copper buckles, cut to length for Ender 3 and more. Check price on Amazon
- Best Pre-Cut Kit TIEXYE Ender 3 XY Kit: X 786mm and Y 743mm belts pre-cut for the Ender 3, no cutting needed. Check price on Amazon
- Best for Materials Hanglife GT2 2M: Nylon jacket, neoprene rubber and fiberglass, built for high temperatures. Check price on Amazon
- Best Gates Belt Creality Gates 2M: Official Creality Gates belt, 2M open GT2 with copper sleeves. Check price on Amazon
- Best Creality Original Creality 2M Belt: 100% original Creality belt, 2M open GT2 with copper sleeves. Check price on Amazon
Machines on the list

CNZTHDY 3D Printer 5 Meters GT2 Timing Belt 10pcs
A 5M open GT2 belt, 6mm wide with a 2mm pitch, with 10 copper buckles, for Neptune 4 Plus, Ender 3, Ender 5, CR-10 and more.
Pros
- 5M of belt with 10 copper buckles, cut to the length the printer needs
- Fits Neptune 4 Plus, Ender 3, Ender 5, CR-10, Kobra Max and Anet A8
- 360° rotation with good elasticity, anti-wear and no slippage
- Shock absorption and low noise with high transmission efficiency
Cons
- No warranty term is stated in the listing
- Cutting and joining are needed; no pre-cut Ender 3 kit
- No material beyond high quality rubber is stated
- Also sold for machinery, automobiles and conveyors, so it is not Ender 3 specific

Ender 3 Belt Upgrade, Ender 3 Timing Belt
A pre-cut Ender 3 belt kit: an X axis belt of 786mm and a Y axis belt of 743mm, 2GT, 6mm wide, in open timing rubber.
Pros
- Pre-cut X 786mm and Y 743mm belts for the Ender 3, no cutting needed
- High precision seamless matching with the synchronization wheel
- Soft and durable with high wear resistance and good crack resistance
- Shock absorption and low noise with a buffer
Cons
- No warranty term is stated in the listing
- Fits the Ender 3 only; no other printer model is named
- No copper sleeves or buckles are stated in the kit

HANGLIFE GT2 Timing Belt with Copper Buckle
A 2M open GT2 belt, 6mm wide with a 2mm pitch, in nylon jacket, neoprene rubber and fiberglass, with 2 pre-pressed copper buckles.
Pros
- Nylon jacket, neoprene rubber and fiberglass reinforcement
- Withstands high temperatures and resists chemical corrosion, per the listing
- 2 pre-pressed copper buckles; insert the belt and clamp with pliers
- Quiet running with low dust production and abrasion resistance
Cons
- No warranty term is stated in the listing
- No printer model is named; the buyer must confirm the fit
- Cutting to length is needed; no pre-cut kit
- Product dimensions are listed in inches, not meters

Official Creality Gates Timing Belt Length 2M
An official Creality Gates belt, 2M open 2GT, pitch 2mm and width 6mm, with copper sleeves, for Ender 3 Series and Ender 3 S1 Series.
Pros
- Gates belt, 100% original from Creality, per the listing
- PU material with fiber reinforcement, soft and durable
- Fits Ender 3 Series, Ender 3 S1 Series, Ender-5 Series and CR-10 Series
- After-sales team gives solutions within 24 hours, per the listing
Cons
- No warranty term is stated in the listing
- Open belt only; cutting and joining are needed
- Bullets repeat the standard Creality belt text, with Gates named in the title only
- No weight or thickness beyond the 6mm width is stated

Creality Timing Belt Length 2 Meters
A 2M open 2GT belt from Creality, pitch 2mm and width 6mm, with copper sleeves, for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 and CR-10.
Pros
- 100% original from Creality, per the listing
- PU material with fiber reinforcement, soft and durable
- Fits Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 and CR-10
- After-sales team gives solutions within 24 hours, per the listing
Cons
- No warranty term is stated in the listing
- Open belt only; cutting and joining are needed
- No weight or thickness beyond the 6mm width is stated
Other machines to compare
3D Printer Belt 2 MeterCheck price on Amazon
FYSETC 3D Printer Belt 5 Meters/ 16.4 Ft Length 2GT 6mmCheck price on Amazon
DiGiYes 3D Printing GT2 Open Timing Belt 2 MetersCheck price on Amazon
5M GT2 Timing BeltCheck price on Amazon
HTD3M Open Ended PU Timing Belt Width 15mm for CNC LaserCheck price on Amazon
Specs compared
| Belt | HQ Score | Length | Width | Pitch | Fits | Sleeves | Warranty |
|---|---|---|---|---|---|---|---|
| CNZTHDY 5M Belt | 9.7/10 | 5M | 6mm | 2mm | Neptune 4 Plus, Ender 3, Ender 5, CR-10, Kobra Max, Anet A8 | 10 | Not stated |
| TIEXYE Ender 3 XY Kit | 9.6/10 | X 786mm, Y 743mm | 6mm | 2mm | Ender 3 | Not stated | Not stated |
| Hanglife GT2 2M | 9.6/10 | 2M (6.6ft) | 6mm | 2mm | Not stated | 2 | Not stated |
| Creality Gates 2M | 9.6/10 | 2M | 6mm | 2mm | Ender 3 Series, Ender 3 S1, Ender-5, CR-10 | Copper sleeves included | Not stated |
| Creality 2M Belt | 9.6/10 | 2M | 6mm | 2mm | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5, CR-10 | 6 in title, 2 in bullets | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
Most Ender 3 belt listings are open lengths
Most Ender 3 belt listings are open lengths to cut, not pre-cut kits. Of the 5 picks here, 4 are open belts in 2M or 5M lengths with copper sleeves, and only the TIEXYE kit arrives pre-cut for the X and Y axes. That split shapes the choice: a pre-cut kit fits the Ender 3 with no measuring, while an open belt fits more printers and leaves spare length.
How to choose the best timing belt for ender 3
Length: pre-cut kit or open belt
The TIEXYE kit is pre-cut: an X axis belt of 786mm and a Y axis belt of 743mm for the Ender 3. The other picks are open belts of 2M or 5M to cut to the length the printer needs. Measure the old belt before ordering, and keep the spare length for the next replacement.
Width and pitch: 6mm and 2mm
Every pick here is a GT2 belt, 6mm wide with a 2mm pitch, which matches the Ender 3 pulleys. Width and pitch are the figures to match first: a belt of the wrong width or pitch will not sit on the pulley. The listings state no other width or pitch.
Material and reinforcement
The Creality belts are PU with fiber reinforcement, soft and durable with high wear resistance. The CNZTHDY belt is high quality rubber with good elasticity and anti-wear ability. The Hanglife belt layers a nylon jacket, neoprene rubber and fiberglass reinforcement, and the maker states it withstands high temperatures and resists chemical corrosion. The TIEXYE kit is open timing rubber, soft and durable with good crack resistance.
Copper sleeves and cutting
Open belts join with copper sleeves: the CNZTHDY kit includes 10 open copper buckles, the Creality belt lists 6 in the title and 2 in the bullets, and the Hanglife pack includes 2 pre-pressed copper buckles. The Gates belt includes copper sleeves. Cut the belt to length, insert the ends into a buckle and clamp it with pliers, per the Hanglife listing. For a related printer part, see the PTFE tubing for Bowden 3D printer guide.
Project Match
Match the belt to the job:
- Replace a worn Ender 3 belt with no cutting: TIEXYE Ender 3 XY Kit, pre-cut X 786mm and Y 743mm.
- Cut a belt for an Ender 3, Ender 3 Pro, Ender 3 V2 or Ender 3 Max: Creality 2M Belt, 2M open GT2 with copper sleeves.
- Stock spares for several printers: CNZTHDY 5M Belt, 5M open GT2 with 10 copper buckles, for Neptune 4 Plus, Ender 3, Ender 5, CR-10 and more.
- Rebuild with a Gates belt: Creality Gates 2M, 2M open GT2 with copper sleeves for Ender 3 Series and Ender 3 S1 Series.
- Run in heat or near chemicals: Hanglife GT2 2M, nylon jacket, neoprene rubber and fiberglass, built for high temperatures.
How the scores add up
Each belt is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CNZTHDY 5M Belt | 9.7 | 32 | 22 | 21 | n/a | 0 |
| TIEXYE Ender 3 XY Kit | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Hanglife GT2 2M | 9.6 | 30 | 22 | 20 | n/a | 0 |
| Creality Gates 2M | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Creality 2M Belt | 9.6 | 29 | 21 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What length belt does an Ender 3 need?
The TIEXYE kit states an X axis belt of 786mm and a Y axis belt of 743mm for the Ender 3. Open belts of 2M or 5M can be cut to those lengths.
What size is a GT2 timing belt?
Every pick here is 6mm wide with a 2mm pitch. Match those figures to the pulleys before ordering.
Can a timing belt be cut to length?
Yes, for open belts: the listings state to cut the belt to the length the printer needs, then join the ends with copper sleeves. The TIEXYE kit is pre-cut and needs no cutting.
Do these belts fit printers other than the Ender 3?
Yes, several do. The Creality belt fits the Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series, and the CNZTHDY belt fits the Neptune 4 Plus, Ender 5, CR-10, Kobra Max and Anet A8. The TIEXYE kit is cut for the Ender 3 only.
How do copper sleeves join a belt?
Insert the belt ends into a pre-pressed copper buckle and clamp it with pliers, per the Hanglife listing. The CNZTHDY kit includes 10 open copper buckles, and the Creality and Hanglife packs include copper sleeves.
Related: best PTFE tubing for Bowden 3D printer, best 3D printer accessory kit, best isopropyl alcohol for 3D printing, best window vent kit for 3D printer and the 3D printers hub. Also see the tools to clean up 3D prints guide. Also see the dual Z axis 3D printer kit guide.




