Bambu Lab P1S vs Ender 3 V3: Which One Should You Buy?
One accessory for each printer: a YOOPAI cold build plate for Bambu Lab machines and a Creality ceramic hotend kit for the Ender 3 V3, compared on stated specs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Creality Official Ender 3 V3 Plus/3 V3 Ceramic9.5/10View on Amazon - 2
YOOPAI Cold Build Plate for Bambu Lab9.4/10View on Amazon
A maker choosing between the Bambu Lab P1S and the Ender 3 V3 wants to know which printer prints better and with less fuss. This bambu lab p1s vs ender 3 v3 comparison answers a narrower question, because the two listings here are accessories, not printers: a YOOPAI cold build plate made for Bambu Lab machines, and a Creality ceramic hotend kit made for the Ender 3 V3. Each one fits only its own side, so the right pick follows the printer you already own.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: neither listing is a printer, so this is a comparison of two accessories, one per side. The Creality hotend kit has the fuller set of stated figures, with a 300°C top temperature, 600mm/s rated speed and 32mm³/s flow for the Ender 3 V3. The YOOPAI cold plate is the Bambu side pick, with low-temperature PLA and PETG printing and easy release after cooling. Pick by the printer on your bench.
Machines on the list

Creality Official Ender 3 V3 Plus/3 V3 Ceramic
An official Creality ceramic hotend kit for the Ender 3 V3 and Ender 3 V3 Plus, with a 60W heater, 300°C top temperature and 600mm/s rated speed.
Pros
- 600mm/s rated speed with 32mm³/s flow
- Reaches 300°C in 75 seconds with a 360° ceramic heater
- All-metal integrated design with a titanium alloy heat break
- Copper alloy and hardened steel nozzle supports PLA, ABS, TPU, PP, PC and carbon-fiber-filled filaments
Cons
- No warranty term is stated
- Fits only the Ender 3 V3 and Ender 3 V3 Plus
- No safety certification is stated in the listing
- The listing states no size, weight or nozzle diameter

YOOPAI Cold Build Plate for Bambu Lab
A double-sided 257x257mm cold build plate for Bambu Lab printers, with an UltraTack coating for low-temperature PLA and PETG printing.
Pros
- 257x257mm double-sided plate, one board for two purposes
- Low-temperature printing: PLA 45-55°C, PETG 60-70°C
- UltraTack coating with strong magnetism for first-layer adhesion
- Bend the plate after cooling and the print pops off, with no scraping
Cons
- No warranty term is stated
- No safety certification is stated in the listing
- The listing states no weight or thickness
- The listing notes that adhesion grows stronger as hotbed temperature rises, so cooler beds hold less firmly
Other machines to compare
Comgrow Ender 3 V3 KE PEI Spring Steel 235x235mmCheck price on Amazon
Creality Ender 3 V3 SE 3D Printer Bundle with PLA Filament 4Check price on Amazon
Creality Ender-3 V3 Neo Combo Multicolor 3D PrinterCheck price on Amazon
Bambu Lab P1S ComboCheck price on Amazon
BIQU CryoGrip Pro Frostbite for Bambu-LabCheck price on Amazon
Energy-Saving Cold Build Plate for Bambu LabCheck price on Amazon
Bambu Lab P1S vs Ender 3 V3: What Each Listing Actually Is
Readers searching for bambu lab p1s vs ender 3 v3 expect a printer shootout, so here is the plain fact: the YOOPAI listing is a cold build plate that fits Bambu Lab printers including the P1S, and the Creality listing is a ceramic hotend kit that fits the Ender 3 V3 and Ender 3 V3 Plus. No printer is listed here, and neither listing gives a full printer specification.
Side by side
| Spec | Creality Hotend Kit | YOOPAI Cold Build Plate | Notes |
|---|---|---|---|
| HQ Score | 60 | 55 | The higher total leads the ranking |
| Type | Ceramic hotend kit | Cold build plate | Each listing is an accessory, not a printer |
| Fits | Ender 3 V3, Ender 3 V3 Plus | X2D, P2S, P1P, P1S, X1C, X1E, A1 | Neither fits the other side’s printer |
| Temperature stated | Nozzle 300°C | Bed PLA 45-55°C, PETG 60-70°C | Nozzle heat vs bed heat, not the same measure |
| Speed | 600mm/s | Not stated | The plate listing states no print speed |
| Flow | 32mm³/s | Not stated | The plate listing states no flow figure |
| Size | Not stated | 257x257mm | The hotend listing states no size |
| Filaments | PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF | PLA, PETG | The plate listing names PLA and PETG only |
| Power | 60W | Not stated | The plate listing states no wattage |
| Warranty | Not stated | Not stated | Neither listing states a warranty term |
These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).
The YOOPAI cold plate: low-temperature printing
The YOOPAI plate measures 257x257mm and is double-sided, with an UltraTack coating. The maker lists PLA bed temperatures of 45-55°C and PETG bed temperatures of 60-70°C, the cold, low-temperature printing the plate is named for. Strong magnetism and a warp-resistant design are listed for first-layer adhesion, and bending the plate after cooling pops the print off with no scraping. A wipe with soap and water restores adhesion, per the listing.
The Creality hotend kit: heat, speed and flow
The Creality kit is built around a 360° surround ceramic heater, rated 60W, that reaches 300°C in 75 seconds. Its enlarged hot melt section supports the 600mm/s rated speed and 32mm³/s flow. The nozzle and heat break use an all-metal integrated design: the heat break is titanium alloy, and the nozzle is copper alloy and hardened steel. The plate side states no matching figures, so heat and speed cannot be compared head to head.
Filaments and materials
The Creality kit lists the widest filament range here: PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF and PET-CF. The YOOPAI plate names PLA and PETG, with bed temperatures for each, and says nothing about other filaments.
Fit and compatibility
The YOOPAI plate fits the X2D, P2S, P1P, P1S, X1C, X1E and A1, and carries an Identification Code for automatic bed leveling on X1C and X1E models. The Creality kit fits the Ender 3 V3 and Ender 3 V3 Plus. Neither accessory fits the other side’s printer, so compatibility decides which listing applies to you.
Safety and support
Neither listing states a safety certification or a warranty term, so both earn nothing on those two measures here. The Creality listing names a professional customer service team for questions, and the YOOPAI listing describes a scratch-resistant coating whose adhesion a wipe with soap and water restores.
Choose the YOOPAI cold plate if
- You print PLA or PETG on a Bambu Lab printer from the listed models.
- You want lower bed temperatures and a print that pops off after cooling.
- A double-sided plate with an UltraTack coating fits your workflow.
Choose the Creality hotend kit if
- You print on an Ender 3 V3 or Ender 3 V3 Plus.
- You want higher-temperature printing with a 300°C top temperature and 600mm/s rated speed.
- You print ABS, TPU, PP, PC or carbon-fiber-filled filaments from the listed range.
Project Match
Match each project with the accessory that fits the printer it runs on:
- PLA and PETG prints on a Bambu Lab P1S: the YOOPAI cold plate, at 45-55°C for PLA and 60-70°C for PETG.
- High-temperature, high-flow prints on an Ender 3 V3: the Creality hotend kit, at up to 300°C and 600mm/s.
- ABS, TPU, PP, PC or carbon-fiber-filled PLA, PA or PET prints: the Creality hotend kit, per its filament list.
- Prints that must release cleanly after cooling: the YOOPAI cold plate, bent after cooling.
- Anything outside those filaments or temperatures: Not stated for either listing.
FAQ: lasers and CNC
Is the Bambu Lab P1S better than the Ender 3 V3?
Neither listing here is a printer, so this comparison cannot rank the two printers. The YOOPAI listing is a cold build plate for Bambu Lab printers, and the Creality listing is a hotend kit for the Ender 3 V3. Pick the accessory that fits the printer you own.
What bed temperatures does the YOOPAI cold plate use?
PLA at 45-55°C and PETG at 60-70°C, per the listing. Those are low-temperature figures, and the listing notes that adhesion grows stronger as hotbed temperature rises.
How fast does the Creality hotend kit heat up?
It reaches 300°C in 75 seconds, per the listing. The enlarged hot melt section supports the 600mm/s rated speed and 32mm³/s flow.
Which filaments work with the Creality hotend kit?
The listing names PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF and PET-CF. The nozzle is copper alloy and hardened steel, and the heat break is titanium alloy.
Does the YOOPAI plate fit other Bambu Lab printers?
Yes, the listing names the X2D, P2S, P1P, P1S, X1C, X1E and A1 for this 257x257mm plate. It carries an Identification Code for automatic bed leveling on X1C and X1E models.
Related: best nozzle for Bambu Lab P1S, Bambu Lab A1 vs P2S, Creality K2 Plus vs Ender 3 V3 and PTFE vs all-metal hotend.




