Best Multicolor 3d Printer Filament (2026): 5 Picks for Makers
Five multicolor PLA and PLA+ filaments compared by diameter, colors, spool size and warranty, with who should skip each.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFLASHFORGE Chameleon9.7/10View on Amazon - 2
Best RainbowSUNLU Silk Rainbow9.7/10View on Amazon - 3
Best Tri-ColorFLASHFORGE Tri-Color9.6/10View on Amazon - 4
Best BundleMeuymeu 8P Glow Silk9.6/10View on Amazon
A print that should pop with color can come out flat, and the difference is usually the spool, not the printer. Signs, vases, masks, figures and ornaments all read better when the color shifts as the part turns in the light. A best multicolor 3d printer filament puts those shifts into the strand itself, so the printer does the color work while you watch. The filaments below are compared by diameter, colors, spool size and warranty, with what each listing does not state marked plainly.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FLASHFORGE Chameleon: Chameleon color shift with light, 1 year warranty and 1.75 mm at plus or minus 0.02 mm Check price on Amazon
- Best Rainbow SUNLU Silk Rainbow: Color changes each 8 meters, 330 meters on a 1 kg spool Check price on Amazon
- Best Tri-Color FLASHFORGE Tri-Color: Three colors in one strand with a 360 degree shifting effect Check price on Amazon
- Best Bundle Meuymeu 8P Glow Silk: 8 spools of silk tricolor and glow in the dark PLA+, 200 g each Check price on Amazon
Machines on the list

FLASHFORGE PLA Filament 1.75mm
Chameleon PLA filament, 1.75 mm, in Burnt Titanium, that changes color with light and angle, on a 1 kg spool with a 1 year warranty.
Pros
- Color changes with light and angle, and hides layer lines per the listing
- 1 year warranty stated
- Dried for 24 hours and vacuum-sealed before shipping
- Low warping and minimal odor, per the listing
Cons
- The series lists 5 colors, and this spool is Burnt Titanium only
- No print temperature is stated
- No spool dimensions are stated
- The listing does not state a print speed

SUNLU Silk Rainbow PLA Filament
Silk rainbow PLA filament, 1.75 mm, that changes color each 8 meters, with 330 meters on a 1 kg spool and a 30-day warranty.
Pros
- Color changes each 8 meters for more variations in a print
- Full recommended settings stated: nozzle, bed and speed
- 330 meters on a 1 kg spool
- Neatly wound to avoid tangling and clogging, per the listing
Cons
- Colors may change with each roll, so the initial color may differ from the image
- A 30-day warranty, the briefest term stated here
- Silk finish needs higher temperatures and lower speeds for gloss, per the listing
- No glow or matte option in this spool

FLASHFORGE Silk Tri-Color PLA Filament 1.75mm
Silk tri-color PLA filament, 1.75 mm, in orange, green and blue, with a 360 degree multicolor shifting effect and a two-month warranty.
Pros
- Three colors coextruded in one strand
- 360 degree shifting color effect
- Dried for 24 hours and vacuum sealed with desiccant
- Tangle-free winding with manual detection, per the listing
Cons
- No print temperature or speed is stated
- No spool dimensions are stated

Meuymeu 8P Multicolor Glow in the Dark PLA
Bundle of 8 spools of 200 g each: 4 tricolor silk PLA+ and 4 glow in the dark PLA+, 1.75 mm, with a total of 1.6 kg.
Pros
- 8 spools cover silk and glow styles in one bundle
- Glow colors charge in daylight or UV light, per the listing
- Each 200 g spool is vacuum-sealed with desiccant
- Wide settings stated: nozzle, bed and speed
Cons
- Glow needs around 30 minutes of light exposure before viewing in the dark
- No warranty term is stated

LANDU Silk Tri-Color PLA Filament 1.75mm 1Kg
Silk tri-color PLA filament, 1.75 mm, in red, blue and green, on a 1 kg spool, with a diameter tolerance of plus or minus 0.02 mm.
Pros
- Three colors in one strand for a multicolor effect
- Silky glossy finish with no post-processing needed, per the listing
- Neatly wound to prevent knots
- Diameter tolerance of plus or minus 0.02 mm
Cons
- No warranty term is stated
- No print temperature or speed is stated
- No spool dimensions are stated
- No drying or vacuum packaging is stated
Other machines to compare
Creality PLA+ 3D Printer Filament 1.75mmCheck price on Amazon
SUNLU Silk PLA+ Filament 1.75mm Multicolor 250gx4Check price on Amazon
SUNLU Silk Rainbow PLA FilamentCheck price on Amazon
RAMBERY Silk & Matte Rainbow 3D Printer Filament PLA 1.75mmCheck price on Amazon
3Dgenius Silk Triple Color PLA Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Filament | Diameter | Colors | Spool | Warranty |
|---|---|---|---|---|---|---|
| FLASHFORGE Chameleon | 9.7/10 | PLA | 1.75 mm | Burnt Titanium | 1 kg | 1 year |
| SUNLU Silk Rainbow | 9.7/10 | Silk PLA | 1.75 mm | Pink-Yellow-Blue-Green | 1 kg | 30 days |
| FLASHFORGE Tri-Color | 9.6/10 | Silk PLA | 1.75 mm | Orange Green Blue | Not stated | 2 months |
| Meuymeu 8P Glow Silk | 9.6/10 | PLA+ | 1.75 mm | Tricolor silk and glow | 8 x 200 g | Not stated |
| LANDU Tri-Color Silk | 9.6/10 | Silk PLA | 1.75 mm | Red Blue Green | 1 kg | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026). Diameter is the filament diameter, and spool is the filament weight on the spool.
What the listings tell you, and what they leave out
Three of the listings state a warranty term: a 30-day term on the SUNLU, a 1 year term on the FLASHFORGE Burnt Titanium, and a two-month term in the bullets of the FLASHFORGE tri-color, whose spec table instead states 1 Year. The Meuymeu bundle and the LANDU spool state no warranty term. Two listings give full recommended settings with nozzle, bed and speed, and two give none at all.
Two listings also contradict themselves: the Meuymeu spec table says 25 items while the title and bullets say 8 spools, and the FLASHFORGE tri-color bullets state a two-month warranty while its spec table states 1 Year. Where a listing disagrees with itself, this guide follows the title and bullets.
Buying guide: best multicolor 3d printer filament
Silk, tricolor and chameleon
Silk PLA has a glossy, smooth surface, per the SUNLU listing. Tricolor filaments coextrude three colors in one strand, so the color balance changes as the part turns. Chameleon filament changes color with light and angle, and the FLASHFORGE listing says it hides layer lines. All five listings here are PLA or PLA+ at 1.75 mm.
Diameter and tolerance
Four listings state 1.75 mm with a tolerance of plus or minus 0.02 mm, and the Meuymeu states 1.75 mm with a tolerance of plus or minus 0.03 mm. A steady diameter keeps the flow steady, and the listings that state a tolerance also state neat winding to avoid tangles.
Spool size and bundles
Three spools state 1 kg: the SUNLU, the FLASHFORGE Burnt Titanium and the LANDU. The Meuymeu bundle lists 8 spools of 200 g each, 1.6 kg in total. The FLASHFORGE tri-color states no spool weight. A bundle suits makers who want many colors open at once, while a single spool suits one project at a time.
Print settings
The SUNLU lists a nozzle temperature of 205-235°C, a bed temperature of 50-60°C and a print speed of 50-200 mm/s, and the Meuymeu lists 200-220°C, 55-65°C and 0-300 mm/s. The other listings state no temperatures or speeds, so check the listing before the first print.
Glow in the dark
The Meuymeu bundle includes 4 glow in the dark PLA+ colors that absorb light from sunlight or UV light and glow in dark rooms. The listing says to expose the filament or the printed model to bright daylight or UV light for around 30 minutes for a more noticeable effect.
Drying and storage
The SUNLU, both FLASHFORGE listings and the Meuymeu state vacuum-sealed packaging, and the FLASHFORGE listings state drying for 24 hours before packaging. The Meuymeu seals each 200 g spool separately with desiccant, so only the spool in use is opened.
Project Match
- Dragons, vases, masks and figures: the Meuymeu bundle lists silk tricolor and glow colors for those models.
- Arts and crafts with a glossy finish: the SUNLU silk rainbow lists arts and crafts as its use, with a gloss tip of nozzle 230°C and outer wall speed 60 mm/s.
- Decorative prints and display models: the LANDU lists high-quality displays and decorative projects.
- Halloween and night decor: the Meuymeu lists ghosts, pumpkins and skulls for Christmas, Halloween and night decor.
- Functional parts: the FLASHFORGE tri-color lists functional projects; the other listings describe decorative prints.
How the scores add up
Each filament is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FLASHFORGE Chameleon | 9.7 | 30 | 21 | 20 | n/a | 2 |
| SUNLU Silk Rainbow | 9.7 | 32 | 21 | 21 | n/a | 1 |
| FLASHFORGE Tri-Color | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Meuymeu 8P Glow Silk | 9.6 | 29 | 19 | 21 | n/a | 0 |
| LANDU Tri-Color Silk | 9.6 | 28 | 20 | 20 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What is multicolor 3D printer filament?
Multicolor filament carries more than one color in a single strand, so the printed part changes color as it builds. The filaments here use silk rainbow gradients, tricolor coextrusion or chameleon pigments, all in PLA or PLA+ at 1.75 mm.
How does silk PLA differ from regular PLA?
Silk PLA has a glossy, smooth, silky surface, per the SUNLU listing, while regular PLA has a matte finish. The SUNLU listing says higher printing temperatures and lower speeds give a glossier finish.
Does multicolor filament work on any 3D printer?
The listings here state 1.75 mm filament for FDM printers. The SUNLU states compatibility with nearly all 1.75 mm FDM printers, and the FLASHFORGE tri-color states compatibility with 99% of FDM printers.
How should multicolor filament be stored?
Keep it dry and sealed. The listings here state vacuum-sealed packaging, and the Meuymeu seals each 200 g spool separately with desiccant. The FLASHFORGE listings state drying for 24 hours before packaging.
Related: the 3D printer hub, laser cutter vs 3D printer, and the best ABS filament black. Also see our best dark blue PLA filament. Also see our best value PLA filament. Also see our PLA vs PVA filament. Also see our best filament dry box under 35. Also see our Sunlu S1 vs S2 filament dryer. Also see our best 3D printer lubricant oil. Also see our glue stick vs hairspray for 3D printing.




