Best Multicolor PLA Filament for Figurines (2026)
Five silk and rainbow PLA spools and bundles for 1.75 mm FDM printers, compared by color change, spool size and accuracy.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGeeetech Rainbow PLA9.7/10View on Amazon - 2
Best BundleLANDU Silk PLA Bundle9.7/10View on Amazon - 3
Best 1 kg SpoolSUNLU Rainbow PLA 1KG9.7/10View on Amazon - 4
Best Gradient BundleYOOPAI Silk Rainbow9.6/10View on Amazon - 5
Best Silk FinishAMOLEN Silk Rainbow9.6/10View on Amazon
A figurine lives or dies on its surface. A plain print in a flat color can look dull even when the shape is right, while a print that shifts color across the face, the cloak or the base reads as finished before any paint touches it. That is the job for the best multicolor PLA filament for figurines: filament that carries several colors, so small display pieces come off the printer already showing depth and detail.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Geeetech Rainbow PLA: A 1 kg rainbow spool with four colors shifting every 8 meters, a stated 1 year warranty and vacuum-sealed packing with desiccant. Check price on Amazon
- Best Bundle LANDU Silk PLA Bundle: Four 200 g silk tri-color spools in four colorways, with a glossy finish for figurines and a stated 1 year warranty. Check price on Amazon
- Best 1 kg Spool SUNLU Rainbow PLA 1KG: A 1 kg rainbow spool with published nozzle, bed and speed settings and a neatly wound spool for steady feeding. Check price on Amazon
- Best Gradient Bundle YOOPAI Silk Rainbow: Four 250 g mini spools with a true gradient that shifts about every 8 meters, plus published print settings. Check price on Amazon
- Best Silk Finish AMOLEN Silk Rainbow: A 1 kg silk rainbow spool with a glossy, smooth surface and raw materials from the USA. Check price on Amazon
Machines on the list

Geeetech Rainbow PLA Filament 1.75mm
A 1 kg rainbow PLA spool in red, yellow, blue and green, with the color shifting every 8 meters and vacuum-sealed packing with desiccant.
Pros
- Four colors, red, yellow, blue and green, with a gradient that shifts every 8 meters
- A 1 kg spool, 2.2 lbs, suited to longer prints
- Vacuum-sealed with desiccant and neatly spooled to resist tangles
- Made from non-toxic bio-materials extracted from corn, per the listing
Cons
- The title states ±0.02 mm accuracy while the bullets state ±0.03 mm
- No nozzle, bed or speed settings are stated
- The lifetime replacement claim conflicts with the stated 1 year warranty
- A single rainbow colorway, with no bundle option stated

LANDU 3D Printer Filament Bundle
A bundle of four 200 g silk tri-color PLA spools, 800 g in total, with a glossy finish for figurines, cosplay props and decorative models.
Pros
- Four 200 g spools, 800 g in total, across four tri-color combinations
- Silk PLA with a glossy, metallic-like finish for figurines and decorative models
- Tri-color strands shift shade with the viewing angle, for depth on small pieces
- 1.75 mm filament for most FDM printers and AMS systems, per the listing
Cons
- Mini spools suit small projects, not large single prints
- No nozzle, bed or speed settings are stated
- No desiccant or vacuum-sealed packing is stated
- No color-change distance is stated, unlike the gradient spools here

SUNLU 3D Printer Filament
A 1 kg rainbow PLA spool, Rainbow 02, with the color changing every 8 meters and published nozzle, bed and speed settings.
Pros
- Color changes every 8 meters, with each color bright and the transition natural, per the listing
- Published settings: 210-240°C nozzle, 50-60°C bed and 100-200 mm/s speed
- Neatly wound spool with a 100% neat rate to reduce tangles and jams
- Spool dimensions stated: 8.00 in diameter, 2.50 in wide, 2.20 in hub hole
Cons
- No warranty term is stated
- A single colorway, Rainbow 02, with no bundle option stated
- No silk finish is claimed, unlike the silk spools here
- Suited to decorations and toys, with no figurine-specific detail stated

SUNLU Silk Rainbow PLA Filament Bundle 1.75mm
A bundle of four 250 g silk rainbow mini spools, with a true gradient that shifts about every 8 meters and a glossy, satin-like finish.
Pros
- Four 250 g mini spools for several gradient prints without committing to large rolls
- True gradient: new colors appear about every 8 meters along the filament
- Silk additives give a glossy, satin-like finish straight off the printer, per the listing
- Published settings: 205-220°C nozzle, 50-60°C bed and 100-200 mm/s speed
Cons
- The title names SUNLU while the brand is listed as YOOPAI
- AMS use needs a printed 250 g spool adapter
- No warranty term is stated
- Mini spools suit multi-color projects, not large single prints

AMOLEN Silk PLA 3D Printer Filament
A 1 kg silk rainbow PLA spool in blue, red and yellow-green, with a silky, glossy surface for arts, crafts and decorative pieces.
Pros
- Silk PLA with a smooth, glossy surface for a refined finish on decorative pieces
- Fast color change along the strand, for multicolor prints from one spool
- 1.75 mm filament with ±0.02 mm tolerance, for smooth and consistent feeding
- Raw materials from the USA, with 24/7 customer service stated
Cons
- No warranty term is stated
- No nozzle, bed or speed settings are stated
- No vacuum sealing or desiccant packing is stated
Other machines to compare
SUNLU Silk PLA+ Filament 1.75mm Multicolor 250gx4Check price on Amazon
SUNLU PLA Filament 1.75mmCheck price on Amazon
SUNLU Silk Rainbow PLA FilamentCheck price on Amazon
UGUESS PLA+ Silk 3D Printer Filament BundleCheck price on Amazon
PLA Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Filament | Spool | Color change | Accuracy | Warranty |
|---|---|---|---|---|---|---|
| Geeetech Rainbow PLA | 9.7/10 | Rainbow PLA | 1 kg, 1 spool | Every 8 meters | Title ±0.02 mm, bullets ±0.03 mm | 1 year |
| LANDU Silk PLA Bundle | 9.7/10 | Silk PLA, tri-color | 4 x 200 g | Changes with viewing angle | ±0.02 mm | 1 year |
| SUNLU Rainbow PLA 1KG | 9.7/10 | Rainbow PLA 02 | 1 kg, 1 spool | Every 8 meters | ±0.02 mm | Not stated |
| YOOPAI Silk Rainbow | 9.6/10 | Silk rainbow PLA | 4 x 250 g | About every 8 meters | ±0.02 mm | Not stated |
| AMOLEN Silk Rainbow | 9.6/10 | Silk rainbow PLA | 1 kg, 1 spool | Fast color change | ±0.02 mm | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 3 November 2026.
Gradient and tri-color are not the same effect
The color effects in this guide work in different ways, and the difference shows on a finished figurine. Gradient rainbow PLA changes color along the length of the filament: the Geeetech, SUNLU and YOOPAI listings all state a change about every 8 meters, so a tall print moves through colors as it grows. Tri-color silk PLA works differently: the LANDU listing states that one strand combines three colors and shows different shades from different viewing angles, so the color shifts when the figurine is turned. The choice comes down to whether the figurine should change color across its height or across its surface.
Mini spools fit the same logic. The LANDU bundle holds four 200 g spools and the YOOPAI bundle holds four 250 g spools, for several small pieces in different colorways. The Geeetech, SUNLU and AMOLEN listings are single 1 kg spools, for longer runs in one colorway. All five listings state 1.75 mm filament.
Buying guide: best multicolor PLA filament for figurines
Match the filament to the figurine
For display figurines where the finish matters, silk PLA is the natural match: the LANDU and AMOLEN listings both promise a glossy, smooth surface, and the YOOPAI listing promises a glossy, satin-like finish straight off the printer. For figurines where color movement matters more than shine, gradient rainbow PLA suits the job: the Geeetech and SUNLU listings describe bright colors with a natural transition every 8 meters.
Spool size and color trials
Mini spools suit trying colors: the LANDU bundle gives four 200 g spools and the YOOPAI bundle gives four 250 g spools, for several small figurines in different colorways without committing to a large roll. A 1 kg spool suits a maker settled on one colorway: Geeetech, SUNLU and AMOLEN each list a 1 kg spool. The YOOPAI listing notes AMS use with a printed 250 g spool adapter.
Print settings the listings state
Some listings publish full settings. YOOPAI recommends a 205-220°C nozzle, a 50-60°C bed and 100-200 mm/s speed, while SUNLU recommends a 210-240°C nozzle, a 50-60°C bed and 100-200 mm/s speed. The remaining listings state no temperatures or speeds, so a maker using those spools starts from the printer’s PLA defaults instead.
Storage and moisture
Filament left open absorbs moisture, and the listings that address storage do it the same way: YOOPAI, Geeetech and SUNLU each state vacuum-sealed packing with desiccant. The LANDU and AMOLEN listings state no packing detail, so plan dry storage for those spools from the start.
Project Match
Pair the project with the pick, using only what each listing states:
- Small figurines and display models with a glossy finish: LANDU Silk PLA Bundle or AMOLEN Silk Rainbow, both silk PLA with a smooth, glossy surface.
- Gradient vases and decorative prints: Geeetech Rainbow PLA, SUNLU Rainbow PLA 1KG or YOOPAI Silk Rainbow, each with a color change about every 8 meters.
- Color trials across several small pieces: LANDU Silk PLA Bundle with four 200 g spools, or YOOPAI Silk Rainbow with four 250 g spools.
- Cosplay props and gifts: LANDU Silk PLA Bundle, which names cosplay props and gifts, or YOOPAI Silk Rainbow, which names cosplay parts.
- Toys and decorations for kids: SUNLU Rainbow PLA 1KG, which names toys to share for kids and decorations for a space.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Geeetech Rainbow PLA | 9.7 | 30 | 21 | 21 | n/a | 2 |
| LANDU Silk PLA Bundle | 9.7 | 30 | 21 | 20 | n/a | 2 |
| SUNLU Rainbow PLA 1KG | 9.7 | 32 | 22 | 21 | n/a | 0 |
| YOOPAI Silk Rainbow | 9.6 | 30 | 21 | 21 | n/a | 0 |
| AMOLEN Silk Rainbow | 9.6 | 29 | 21 | 21 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What PLA filament works well for small figurines?
Silk PLA suits small figurines because the glossy finish shows detail without paint: the LANDU and AMOLEN listings both describe a smooth, glossy surface for figurines and decorative models. Gradient rainbow PLA suits figurines where color movement matters, changing about every 8 meters.
How often does the color change on rainbow PLA?
About every 8 meters, according to the Geeetech, SUNLU and YOOPAI listings. The color transition is gradual, so a small figurine may show only part of the range while a taller print moves through more of it.
Do I need an AMS to print multicolor PLA?
No. Each filament here carries several colors in a single strand, so one spool prints multicolor pieces on a standard FDM printer. The YOOPAI listing states AMS use with a printed 250 g spool adapter.
What nozzle and bed temperatures suit rainbow PLA?
The YOOPAI listing recommends a 205-220°C nozzle and a 50-60°C bed, and the SUNLU listing recommends a 210-240°C nozzle and a 50-60°C bed. both at 100-200 mm/s speed. The other listings state no temperatures.
Which of these filaments state a warranty?
The LANDU bundle and the Geeetech spool each state a 1 year warranty. The YOOPAI, SUNLU and AMOLEN listings state no warranty term. The Geeetech listing also claims lifetime replacement, which conflicts with its stated 1 year warranty.
Related: best multicolor 3D printer filament, best multi-color PLA filament, best silk PLA filament, best PLA filament for 3D printers and best colored 3D printer filament. Also see the guide to best PLA filament 1.75 mm.




