Best Multicolor 3d Printer (2026): 5 Picks Compared
Multicolor 3D printers compared by color system, build volume, rated speed, nozzle heat, camera and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAnycubic Kobra X9.6/10View on Amazon - 2
Best SpeedFlashforge AD5X IFS9.6/10View on Amazon - 3
Best for BeginnersCreality SPARKX i79.5/10View on Amazon
A print in one color tells only part of the story. The moment a model needs a red logo on a white shell, a gradient vase or a game piece with a colored base, swapping filament by hand turns a fun project into a chore. A best multicolor 3d printer handles the color changes itself, switching filaments mid-print so the finished part comes off the plate in full color. This guide compares machines that print in color, side by side on the figures their listings actually publish: color system, build volume, rated speed, nozzle heat, camera and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Anycubic Kobra X: Native 4-color printing, a 19-color maximum with 4 ACE 2 Pro, a 260 x 260 x 260 mm build volume and a 720P camera. Check price on Amazon
- Best Speed Flashforge AD5X IFS: 600 mm/s, a 300°C nozzle and 4-color printing through the IFS system, with auto leveling and a PEI plate. Check price on Amazon
- Best for Beginners Creality SPARKX i7: Compact desktop design, auto feed and retract, auto refill and an AI camera, with up to 500 mm/s. Check price on Amazon
Machines on the list

ANYCUBIC Kobra X Fast 3D Printer, Native 4-Color
A native 4-color printer with a 260 x 260 x 260 mm build volume, a 720P camera and AI safety features that pause a bad print.
Pros
- Native 4-color printing, with a 19-color maximum using 4 ACE 2 Pro
- 260 x 260 x 260 mm build volume, the largest here
- LeviQ 3.0 auto leveling with 49-point leveling at 0.02mm accuracy
- 720P camera with AI spaghetti detection, plus power and filament recovery
Cons
- No rated print speed in the listing
- Print head warranty is 3 months and heated bed 6 months, inside a one-year warranty
- Color count beyond 4 needs extra ACE 2 Pro units
- The listing gives no nozzle temperature

Flashforge AD5X Multicolor 3D Printer
A 600 mm/s CoreXY printer with 4-color printing through the IFS system, a 300°C nozzle and auto leveling on a PEI plate.
Pros
- 600 mm/s rated speed with CoreXY motion and linear rails
- 4-color printing through the IFS system with auto filament swap
- 300°C all-metal hotend prints ABS, Nylon and Carbon Fiber
- Auto leveling, magnetic PEI plate and a filament runout sensor
Cons
- Carbon Fiber printing requires an enclosed chamber kit
- 220 x 220 x 220 mm build volume is the smallest of the full-data picks
- HD camera is camera ready rather than included
- 1 Year Limited Warranty excepts the extruder and build plate sheet

Snapmaker U1 3D Printer,4-Toolhead with 5s
A multi-color 3D printer with 4 toolheads and a 5-second tool changer, a 270 by 270 by 270 mm build volume, and speeds up to 500 mm/s.
Pros
- 4 independent toolheads with filaments preloaded and preheated, without manual swaps or purging
- Tool changer reduces tool change time from around 2 minutes to just 5 seconds
- 270 by 270 by 270 mm build volume on a CoreXY system
- Multi-material printing with PLA, PVA, TPU, PETG, PCTG, ABS, ASA, PA, PC, and more
Cons
- No enclosed frame is stated
- No heated chamber is stated
- No nozzle sizes are stated
- Weight is not stated

Creality SPARKX i7 Nano Combo Multi‑Color 3D
A compact desktop multicolor printer with auto feed and retract, auto refill, an AI camera and up to 500 mm/s.
Pros
- Up to 500 mm/s rated speed in a compact desktop design
- Auto feed and retract loads and unloads filament without manual steps
- Auto refill switches to a backup spool when one runs out
- Tool-free quick-swap hotend, extruder and cutter for faster maintenance
Cons
- No build volume in the listing
- No color count in the listing, only multi-color
- No nozzle temperature in the listing
- No filament types listed

FLASHFORGE AD5X Multi-Color 3D Printer
A multi-color CoreXY 3D printer with speeds up to 600mm/s, a 220 by 220 by 220 mm build volume, and 1-click auto leveling.
Pros
- Up to 4 colors simultaneously
- Speeds up to 600mm/s with acceleration of 20,000mm/s²
- 300°C direct-drive extruder with dual-channel cooling fan and vibration compensation
- Four nozzle sizes from 0.25mm to 0.8mm, with 0.4mm pre-installed
Cons
- No enclosed frame is stated
- No heated chamber is stated
- No chamber camera is stated
- Machine dimensions of 16.0 by 14.0 by 18.0 inches need desk space
Other machines to compare
SUNLU PLA 3D Printer FilamentCheck price on Amazon
SUNLU PLA+2.0 3D Printer FilamentCheck price on Amazon
ELEGOO PLA 3D Printer Filament 1.75mm Bundle Multicolors 10KGCheck price on Amazon
SUNLU PLA+ 3D Printer FilamentCheck price on Amazon
ELEGOO PLA Plus 3D Printer Filament 250g Spool MulticolorCheck price on Amazon
Specs compared
| Model | HQ Score | Colors | Build volume | Rated speed | Nozzle | Camera | Warranty |
|---|---|---|---|---|---|---|---|
| Anycubic Kobra X | 9.6/10 | Native 4-color, 19-color max with 4 ACE 2 Pro | 260 x 260 x 260 mm | Not stated | Not stated | 720P camera | 1 year |
| Flashforge AD5X IFS | 9.6/10 | 4-color via IFS | 220 x 220 x 220 mm | 600 mm/s | 300°C | Camera ready | 1 year limited |
| Creality SPARKX i7 | 9.5/10 | Multi-color, count not stated | Not stated | Up to 500 mm/s | Not stated | AI camera | 1 year |
| Snapmaker U1 | 9.6/10 | Multi-color, 4-toolhead | Not stated | Not stated | Not stated | Not stated | Not stated |
| Flashforge AD5X CoreXY | 9.5/10 | Multi-color | 220 x 220 x 220 mm | 600 mm/s | 300°C | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
What the listings tell you, and what they leave out
This guide covers 5 multicolor printer listings. 2 of them carry only a title, the other AD5X listing and the Snapmaker U1, with no bullets, spec table or warranty to score. Of the 3 full listings, only 2 state a rated print speed, and only 1 states a color count beyond multi-color. Every full listing states a 1 year warranty, though the AD5X excepts the extruder and build plate sheet and the Kobra X limits the print head to 3 months and the heated bed to 6 months.
No listing states a safety certification. The closest any listing comes is the Kobra X, whose AI safety features detect foreign objects and spaghetti and pause the print.
How to choose the best multicolor 3d printer
Color systems: IFS, ACE and toolheads
Color changes happen in different ways. The AD5X uses an IFS system that auto-swaps PLA, PETG, TPU and metal-fill filaments for 4-color prints. The Kobra X prints 4 colors natively and grows to a 19-color maximum with 4 ACE 2 Pro. The Snapmaker U1 takes a different route, with a 4-toolhead design and a 5s toolchanger the title ties to minimal purge. The Creality SPARKX names multi-color printing but states no color count, so ask the seller how many colors it holds before you buy. See the multicolor 3d printing machine hub for the wider range.
Build volume
Build volume sets the largest model you can print in one piece. The Kobra X offers 260 x 260 x 260 mm, the largest here, while the AD5X offers 220 x 220 x 220 mm. The Creality SPARKX states no build volume at all, and the other AD5X listing repeats 220 x 220 x 220 mm.
Speed and nozzle heat
Rated speed is the number to compare, but only 2 of the 3 full listings state one: the AD5X at 600 mm/s and the SPARKX at up to 500 mm/s. The Kobra X states no speed. Nozzle heat decides the filament range: the AD5X lists a 300°C all-metal hotend for ABS, Nylon and Carbon Fiber, though Carbon Fiber requires an enclosed chamber kit. The other listings state no nozzle temperature.
Leveling, cameras and monitoring
Every full listing here includes auto leveling. The Kobra X pairs LeviQ 3.0 leveling across 49 points at 0.02mm accuracy with a 720P camera and AI spaghetti detection that pauses a bad print and sends a notification to your phone. The AD5X adds a magnetic PEI plate, a filament runout sensor and dual-band Wi-Fi with the Flashforge app, while the SPARKX adds a built-in AI camera and auto refill from a backup spool.
Filament and materials
Multicolor printing is only as good as the filaments the machine swaps. The AD5X lists PLA, PETG, TPU and metal-fill filaments for its IFS system, plus ABS, Nylon and Carbon Fiber through the 300°C nozzle. The Kobra X and SPARKX name no filament types in their listings, so check the listing for the filaments you plan to print before ordering.
Project Match
Match the project to the pick, using only what each listing states.
- Colorful display models and gifts: Anycubic Kobra X, with native 4-color printing and a 19-color maximum with 4 ACE 2 Pro.
- Fast functional prototypes in engineering filaments: Flashforge AD5X IFS, with 600 mm/s and a 300°C nozzle for ABS, Nylon and Carbon Fiber.
- Small-space color printing for a home, studio or classroom: Creality SPARKX i7, with its compact desktop design and auto refill.
- Toolchanger color work: Snapmaker U1, whose title names a 4-toolhead system with a 5s toolchanger. Build volume and speed are not stated.
- Not stated: the other AD5X listing names no project type beyond the model itself.
How the scores add up
Each machine earns an HQ Score on performance, build, value, safety and warranty, with the weights published on the How We Pick page.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Anycubic Kobra X | 9.6 | 29 | 21 | 20 | 5 | 3 |
| Flashforge AD5X IFS | 9.6 | 32 | 21 | 20 | 3 | 2 |
| Creality SPARKX i7 | 9.5 | 27 | 20 | 20 | 3 | 2 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What is a multicolor 3D printer?
A printer that changes filament color during a print, so the finished part comes off the plate in more than one color. The AD5X swaps filaments through its IFS system, the Kobra X prints 4 colors natively, and the Snapmaker U1 uses a 4-toolhead design.
How many colors can a multicolor 3D printer print?
It depends on the color system. The AD5X prints 4 colors through its IFS system. The Kobra X prints 4 colors natively and grows to a 19-color maximum with 4 ACE 2 Pro. The Creality SPARKX names multi-color printing but states no color count.
What filaments can I use for multicolor printing?
The AD5X lists PLA, PETG, TPU and metal-fill filaments for color work, and its 300°C nozzle also covers ABS, Nylon and Carbon Fiber, though Carbon Fiber requires an enclosed chamber kit.
Do I need a phone app to print in color?
No. Color changes run on the printer itself. The app adds monitoring: the AD5X works with the Flashforge app over dual-band Wi-Fi, and the Kobra X sends a notification to your phone when its AI safety features pause a print.
What build volume do I need for multicolor models?
Match the volume to your largest model. The Kobra X offers 260 x 260 x 260 mm and the AD5X offers 220 x 220 x 220 mm, while the Creality SPARKX states no build volume.
Related: the 3D printers hub, FDM 3D printers, and the laser cutter vs 3D printer comparison. Also see the CoreXY vs bed slinger 3D printer. Also see the best 3D printer accessory kit. Also see the best filament dryer rack. Also see the best 3D filament for strength. Also see the best tools to clean up 3D prints. Also see the best matte 3D printer filament. Also see the best glue stick for PETG 3D printing.




