Best Multi Color PLA Filament (2026): 5 Picks Compared
Five silk rainbow and tri-color PLA spools for 3D printing, compared by diameter, colors, weight and settings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU Silk Rainbow9.6/10View on Amazon - 2
Best Candy GradientStronghero3D Candy9.6/10View on Amazon - 3
Best Tri-ColorYOUSU Tri Color9.6/10View on Amazon - 4
Best Triple ColorRepRapper Triple Color9.5/10View on Amazon
A vase that shifts from lilac to violet as it grows, a dragon in pink, blue and green, a gift that changes color with the viewing angle: multi color filament turns a plain print into the product. The best multi color pla filament keeps the diameter steady so the extruder never starves, and this guide compares silk rainbow and tri-color PLA spools by diameter, colors, weight and settings.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU Silk Rainbow: Silk rainbow PLA, 1.75 mm at ±0.02 mm, color change each 8 meters, 330 meters on a 1 kg spool, with a 30-Day warranty. Check price on Amazon
- Best Candy Gradient Stronghero3D Candy: Silk rainbow PLA in candy colors, orange to purple to pink, 1.75 mm at ±0.02 mm and 330 m on a 1 kg spool. Check price on Amazon
- Best Tri-Color YOUSU Tri Color: Coextruded tri-color silk PLA in pink, blue and green, 1.75 mm, on a plastic spool that fits Bambu Lab AMS. Check price on Amazon
- Best Triple Color RepRapper Triple Color: Triple color silk PLA in red, gold and blue, 1.75 mm at ±0.03 mm, vacuum sealed with desiccant. Check price on Amazon
Machines on the list

SUNLU Silk Rainbow PLA Filament
A 1 kg silk rainbow PLA spool, 1.75 mm at ±0.02 mm, that changes color each 8 meters over 330 meters, with a glossy silk finish.
Pros
- Color changes each 8 meters for fast variation
- 1.75 mm at ±0.02 mm for steady flow
- 330 meters on a 1 kg spool
- Lists nozzle, bed and speed settings
Cons
- Initial color may differ from the image
- 30-Day warranty is short
- Glossy finish needs higher temperatures and lower speeds
- Lilac-Violet color only in this listing

Stronghero3D PLA Filament 1.75mm,Candy,Silk
A 1 kg silk rainbow PLA spool, 1.75 mm at ±0.02 mm, in candy colors that shift from orange to purple to pink over 330 meters.
Pros
- Silk rainbow finish with a color gradient
- 1.75 mm at ±0.02 mm for steady flow
- 330 meters on a 1 kg spool
- Low warping with good bed adhesion
Cons
- No warranty term stated
- No temperature settings stated
- Candy color only in this listing
- No spool dimensions stated

YOUSU Tri Color PLA 3D Printer Filament 1.75mm
A 1 kg tri-color coextrusion PLA spool, 1.75 mm, in pink, blue and green, with a silk glossy surface on a plastic black spool.
Pros
- Three colors in every inch of filament
- Silk shiny glossy surface
- Plastic black spool, updated from cardboard
- Lists Bambu Lab AMS and other printers
Cons
- Title says ±0.02 mm, bullets say 0.03 mm
- No warranty term stated
- No temperature settings stated
- No length stated in the listing

SUNLU Silk PLA+ Filament 1.75mm Multicolor 250gx4
A bundle of four 250g dual-color silk PLA+ spools with a glossy finish for multi-color decorative prints.
Pros
- Dual-color silk PLA+ with colors that shift as the model rotates
- Upgraded PLA+ with improved impact resistance and flexibility
- 1.75mm diameter with a ±0.02mm tolerance, precision-wound
- Four 250g spools vacuum-sealed in reusable bags with desiccant
Cons
- 250g spools are small next to 1kg spools
- Title names SUNLU while the brand field reads YOOPAI
- No print temperatures are stated
- No warranty term is stated

Reprapper Triple Color Filament Coextrusion PLA
A 1 kg triple color coextrusion PLA spool, 1.75 mm at ±0.03 mm, in red, gold and blue, vacuum sealed with desiccant.
Pros
- Three colors in one filament: red, gold, blue
- Color changes with the viewing angle
- Suitable for 99% of FDM 3D printers
- Vacuum sealed with desiccant
Cons
- Warranty field reads "2" with no unit stated
- No temperature settings stated
- No length stated in the listing
- No spool dimensions stated
Other machines to compare
Creality PLA+ 3D Printer Filament 1.75mmCheck price on Amazon
SUNLU Silk Rainbow PLA FilamentCheck price on Amazon
SUNLU 4KG Triple Color Silk FilamentCheck price on Amazon
FLASHFORGE Silk PLA Filament 1.75mmCheck price on Amazon
SUNLU 250g PLA Filament Bundle 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Colors | Weight | Color change | Warranty |
|---|---|---|---|---|---|---|
| SUNLU Silk Rainbow | 9.6/10 | 1.75 mm ±0.02 mm | Lilac-Violet | 1 kg | Each 8 meters | 30-Day |
| Stronghero3D Candy | 9.6/10 | 1.75 mm ±0.02 mm | Orange, purple, pink | 1 kg | Not stated | Not stated |
| YOUSU Tri Color | 9.6/10 | 1.75 mm, ±0.02 or ±0.03 mm (listing gives both) | Pink, blue, green | 1 kg | Not stated | Not stated |
| RepRapper Triple Color | 9.5/10 | 1.75 mm ±0.03 mm | Red, gold, blue | 1 kg | Not stated | 2 (no unit stated) |
| YOOPAI PLA+ Bundle | 9.6/10 | 1.75 mm | Red gold, blue green, red blue, green purple | 250 g x 4 | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026. Diameter is the filament diameter; tolerance is the figure each listing states.
What the listings tell you, and what they leave out
5 filament listings were read for this guide. 4 state a diameter of 1.75 mm, and 3 of those state a tolerance of ±0.02 mm. 2 state a length of 330 meters on a 1 kg spool, and 1 states a warranty term. 2 listings contradict themselves: the YOUSU title says ±0.02 mm while its bullets say 0.03 mm, and the RepRapper warranty field reads “2” with no unit.
Only the SUNLU lists nozzle and bed temperatures, 205 to 235°C and 50 to 60°C, so the other picks leave settings to the printer’s own profile.
Buying guide: choosing the best multi color pla filament
Color change or coextrusion
Color-change filament shifts color along the spool: the SUNLU changes color each 8 meters. Coextruded filament carries its colors side by side in every inch, so even a small print shows all three: the YOUSU carries pink, blue and green, and the RepRapper carries red, gold and blue. Pick color change for long gradients and coextrusion for small prints that must show every color.
Diameter and tolerance
All four full-data picks are 1.75 mm filament. A tolerance of ±0.02 mm keeps flow steady; the YOUSU lists ±0.02 mm in the title and 0.03 mm in the bullets, and the RepRapper lists ±0.03 mm. Check the listing you buy, since a wider tolerance can mean uneven extrusion.
Silk finish and settings
Silk PLA has a glossy, smooth surface that hides layer lines, and the SUNLU listing says higher temperatures and lower speeds give a glossier finish: nozzle 230°C, outer wall speed 60 mm/s, and maximum volumetric speed 8 mm³/s. Start from the maker’s recommended settings where the listing gives them: the SUNLU lists a nozzle range of 205 to 235°C and a bed range of 50 to 60°C.
Weight and length
Four picks here are 1 kg spools, and two of them state a length of 330 meters. The YOOPAI bundle is four 250 g spools instead, in dual colors for Bambu Lab printers. Match the spool to the printer: the YOUSU lists Bambu Lab AMS, Ankermaker, Creality, Qidi, Flashforge and Anycubic, and the RepRapper lists 99% of FDM printers.
Storage
Keep spools dry: the SUNLU, Stronghero3D and RepRapper listings state vacuum sealed packaging, and the RepRapper adds desiccant. A damp spool prints rough, so store opened spools sealed and dry.
A 3D printer runs a hot nozzle and a heated bed, so keep hands clear, give the machine clear space and ventilation, and never leave a print running unattended. Keep filament away from children and pets, and follow the printer maker’s guidance for nozzle and bed temperatures.
Project Match
- Arts and crafts: the SUNLU suits arts and crafts, with a glossy finish at higher temperatures and lower speeds.
- Small multi-color prints: the YOUSU tri-color shows pink, blue and green in every inch, so even very small prints show all colors.
- Decorative prints and gifts: the RepRapper suits creative artwork, gift ideas and decorative prints that change color with the viewing angle.
- Gradient vases and models: the Stronghero3D shifts from orange to purple to pink as it prints, and the SUNLU changes color each 8 meters.
- Bambu Lab printers: the YOOPAI bundle is listed for Bambu Lab 3D printers, and the YOUSU lists Bambu Lab AMS among compatible printers.
How the scores add up
Each spool is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Only the SUNLU states a warranty term, 30-Day, and none states a safety certification, so all score zero on safety.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU Silk Rainbow | 9.6 | 30 | 21 | 20 | n/a | 1 |
| Stronghero3D Candy | 9.6 | 29 | 21 | 20 | n/a | 0 |
| YOUSU Tri Color | 9.6 | 28 | 20 | 20 | n/a | 0 |
| RepRapper Triple Color | 9.5 | 28 | 20 | 19 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
Why is PLA filament good?
PLA is easy to print: it sticks well to the bed, warps little, and needs no enclosure for most prints. The picks here add a silk finish and color change, so a plain model comes off the printer looking finished.
What is multi color PLA filament?
Multi color PLA is filament that changes color as it prints, either by shifting color along the spool or by coextruding two or three colors side by side. The SUNLU changes color each 8 meters, while the YOUSU and RepRapper carry three colors in every inch.
What temperature should I print silk PLA at?
Only the SUNLU lists temperatures here: a nozzle range of 205 to 235°C and a bed range of 50 to 60°C, with 230°C, an outer wall speed of 60 mm/s and a maximum volumetric speed of 8 mm³/s for a glossier finish. The other listings give no settings, so start from the printer maker’s PLA profile.
Does multi color PLA work in Bambu Lab AMS?
The YOUSU lists Bambu Lab AMS among compatible printers, and the YOOPAI bundle is listed for Bambu Lab 3D printers. The other listings do not name AMS, so check the listing for the spool you buy.
How long is a 1 kg spool of PLA filament?
Two listings here state a length: the SUNLU and the Stronghero3D each list 330 meters on a 1 kg spool. The YOUSU and RepRapper state 1 kg without a length, and the YOOPAI bundle is four 250 g spools.
Related: the best multicolor 3D printer filament, the best PLA filament for 3D printers, the best PLA filament 1 kg, the best value PLA filament and the best bulk PLA filament. Also see PLA vs silk PLA, silk PLA vs matte PLA, best filament dry box, FDM vs resin 3D printer, Bambu Lab PLA vs SUNLU PLA, our 3D printers hub and best 3D printer filament for outdoor use.




