Best Multi Color 3D Printer with Least Waste (2026): 5 Picks Compared
Five multicolor 3D printers compared by purge waste, color count and build volume, led by a machine the listing says cuts purging waste by 50%.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Least WasteCreality SPARKX i79.7/10View on Amazon - 2
Quickest MulticolorKobra S1 ACE 2 Pro9.7/10View on Amazon - 3
Best for Long PrintsSPARKX i7 Nano Combo9.6/10View on Amazon - 4
Also ListedAnycubic Kobra X9.5/10View on Amazon - 5
Also ListedFLASHFORGE AD5X9.6/10View on Amazon
A multicolor print looks simple on the shelf and wasteful on the bench. Every color change pushes filament through the nozzle and into the purge pile, and over a busy week of figurines, signs and game pieces that pile grows faster than the finished models. The best multi color 3d printer with least waste is the machine that changes color with the least filament thrown away, so this guide compares multicolor printers by how they handle color changes, how much they purge, and what else each listing states about speed, build volume and everyday use.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Least Waste Creality SPARKX i7: Cuts purging waste by 50% and improves printing efficiency by 15%, with a 260 x 260 x 255 mm build volume and an AI camera. Check price on Amazon
- Quickest Multicolor Kobra S1 ACE 2 Pro: 600 mm/s enclosed CoreXY with 4 colors out of the box, up to 16 colors with 4 ACE 2 Pro, and a 65°C dryer box. Check price on Amazon
- Best for Long Prints SPARKX i7 Nano Combo: Auto filament refill from a matching backup spool and empty run detection that halts printing on breakage or tangling. Check price on Amazon
- Also Listed Anycubic Kobra X: Native 4-color printing, up to 19 colors, 600 mm/s and an AI camera, from the title only. Check price on Amazon
- Also Listed FLASHFORGE AD5X: 4-color printing at 600 mm/s with full-auto calibration and filament backup, from the title only. Check price on Amazon
Machines on the list

Creality SPARKX i7 3D Printer Multi Color 3D
A multicolor 3D printer with CFS Lite that cuts purging waste by 50%, with a 260 x 260 x 255 mm build volume, an AI camera and automatic calibration.
Pros
- Cuts purging waste by 50% and improves printing efficiency by 15%, per the listing
- 260 x 260 x 255 mm build volume for large models and detailed miniatures
- AI camera monitors prints and alerts on spaghetti prints and filament entanglement
- Automatic bed leveling, nozzle Z-offset and input shaping with no complicated setup
Cons
- Multicolor printing requires CFS, so check what the bundle includes
- No rated print speed is stated
- No enclosure is stated
- No filament dryer or dry box is stated

Anycubic Kobra S1 ACE 2 Pro Combo FDM 3D Printer
An enclosed CoreXY multicolor printer with 4 colors out of the box, up to 16 with 4 ACE 2 Pro, a 600 mm/s rated speed and a 65°C dryer box.
Pros
- 600 mm/s rated speed in a fully enclosed CoreXY structure
- 4 colors out of the box, expanding to 16 colors with 4 ACE 2 Pro
- 65°C active drying while printing, for PLA, PETG, ABS, ASA and other filaments
- 44 dB operational noise, with smart sensors and auto-resume printing
Cons
- No purge waste figure is stated, so waste savings are not quantified
- ACE Pro and ACE 2 Pro cannot be used simultaneously, per the listing note
- 39.68 lb, the heaviest pick here
- 250 x 250 x 250 mm build volume is smaller than the 260 x 260 x 255 mm Creality picks

Creality SPARKX i7 Nano Combo 3D Printer
A compact multicolor printer with CFS Nano for up to 4 colors, auto filament refill, empty run detection and auto feed and retract.
Pros
- Up to 4 colors with automatic filament switching, no manual filament changing
- Auto filament refill switches to a matching backup spool when filament runs out
- Empty run detection halts printing on breakage, tangling or empty feed
- 260 x 260 x 255 mm build volume in a compact, space-saving design
Cons
- No purge waste figure is stated
- No rated print speed is stated
- No enclosure is stated
- No camera or print monitoring is stated

FLASHFORGE AD5X Multi-Material 3D Printer 4-Color
4-color multi-material FDM printer with 600mm/s speed, full-auto calibration and filament backup.
Pros
- 4-color printing with the Intelligent Filament System, per the listing
- Rated speed up to 600mm/s with acceleration up to 20000mm/s²
- Full-auto calibration and filament backup, per the listing
- CoreXY frame with vibration compensation, per the listing
Cons
- No build volume is stated on the listing
- No nozzle size is stated on the listing
- No enclosure is stated on the listing
- No heated bed or nozzle temperature is stated on the listing

Anycubic Kobra X Multicolor 3D Printer
A multicolor FDM 3D printer with 4 colors built in, expandable to 19 colors, a 260 by 260 by 260 mm print size, and speeds up to 600mm/s.
Pros
- 4 colors built in, expandable up to 19 colors with 4 ACE 2 Pro units
- Max speed of 600mm/s with a hardened steel nozzle and vibration compensation
- LeviQ 3.0 auto bed leveling with a 49-point calibration
- AI camera with spaghetti detection and foreign object detection, plus dual-band Wi-Fi and LAN
Cons
- Filament is not included and must be purchased separately
- ACE 2 Pro and ACE Pro are incompatible with each other
- Machine dimensions of 23.0 by 13.0 by 22.0 inches need desk space
- No enclosed frame is stated
Other machines to compare
FLASHFORGE Creator 5 4-Toolhead Changer 3D PrinterCheck price on Amazon
FLASHFORGE Creator 5 Pro 4-Toolhead 3D PrinterCheck price on Amazon
FLASHFORGE Creator 5 Multi-Color 3D PrinterCheck price on Amazon
FLASHFORGE Creator 5 3D PrinterCheck price on Amazon
FLASHFORGE Creator 5 Pro 3D PrinterCheck price on Amazon
Specs compared
| Model | HQ Score | Colors | Build volume | Rated speed | Waste-saving feature | Warranty |
|---|---|---|---|---|---|---|
| Creality SPARKX i7 | 9.7/10 | Multicolor with CFS Lite | 260 x 260 x 255 mm | Not stated | Cuts purging waste by 50% | 1 Year |
| Kobra S1 ACE 2 Pro | 9.7/10 | 4 colors, up to 16 with 4 ACE 2 Pro | 250 x 250 x 250 mm | 600 mm/s | Not stated | 1 Year |
| SPARKX i7 Nano Combo | 9.6/10 | Up to 4 colors with CFS Nano | 260 x 260 x 255 mm | Not stated | Auto refill and empty run detection | 1 Year |
| Anycubic Kobra X | 9.5/10 | Native 4 colors, up to 19 colors | 260 mm³ (as listed) | 600 mm/s | Not stated | Not stated |
| FLASHFORGE AD5X | 9.6/10 | 4-color printing | Not stated | 600 mm/s | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
How the picks were scored
Each printer is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing, and a printer with only a title to judge scores lower than a printer with a full listing behind it.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality SPARKX i7 | 9.7 | 33 | 21 | 22 | 5 | 2 |
| Kobra S1 ACE 2 Pro | 9.7 | 32 | 22 | 20 | 5 | 2 |
| SPARKX i7 Nano Combo | 9.6 | 30 | 21 | 21 | 4 | 2 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
Why the best multi color 3d printer with least waste comes down to purging
Multicolor printing wastes filament in two places: the purge block or tower the printer builds when it changes color, and the failed prints that follow a filament break or an empty spool. The Creality SPARKX i7 is the only pick here with a stated purge figure: the listing says it cuts purging waste by 50% and improves overall printing efficiency by 15%. That is the headline figure for this guide, and it is why the i7 leads the ranking.
The other picks attack waste from the reliability side instead. The SPARKX i7 Nano Combo watches filament on every channel and halts printing when it detects breakage, tangling or an empty feed, while auto filament refill switches to a matching backup spool when a spool runs out. The Anycubic Kobra S1 ACE 2 Pro adds smart sensors, auto-resume printing and a clog-resistant hotend, so a hiccup is less likely to turn into a failed print. Waste avoided is filament saved, and on long multicolor jobs the reliability features matter as much as the purge figure.
Buying guide: multicolor 3D printers with least waste
Start with the purge figure
Ask how the printer changes color and what it throws away to do it. The SPARKX i7 states the clearest answer here, with purging waste cut by 50% and efficiency up by 15%. The other listings do not state a purge figure, so compare them on the features that prevent wasted filament instead: refill, runout detection and clog resistance.
Count the colors, then count the boxes
Four of the picks print 4 colors: the SPARKX i7 Nano Combo, the Kobra S1 ACE 2 Pro, the Kobra X and the FLASHFORGE AD5X. The Kobra S1 ACE 2 Pro expands to 16 colors with 4 ACE 2 Pro units, and the Kobra X reaches up to 19 colors. More colors mean more changes, so a bigger color count only wins when the printer also keeps purge waste down.
Match build volume to the models
The SPARKX i7 and the SPARKX i7 Nano Combo share a 260 x 260 x 255 mm build volume, and the Kobra S1 ACE 2 Pro offers 250 x 250 x 250 mm. The Kobra X title lists 260 mm³, and the AD5X title states no build volume. A bigger volume helps with large multicolor models such as airless basketballs and intricate miniatures, as the Creality listings show.
Filament handling decides long prints
A spool that runs out midway wastes the whole model. The Nano Combo refills automatically from a matching backup spool and retracts filament after printing, while its empty run detection halts the print on breakage or tangling. The Kobra S1 ACE 2 Pro dries filament at 65°C while printing and stores PLA, PETG, ABS and ASA, which protects prints from humidity defects.
Noise, enclosure and where the printer lives
The Kobra S1 ACE 2 Pro limits operational noise to 44 dB and the Kobra X title lists 45 dB, so both suit a room where people work or sleep. The Kobra S1 ACE 2 Pro is a fully enclosed CoreXY machine, while the SPARKX i7 runs a Night Mode with all lights off for overnight printing. Check the footprint: the Kobra S1 ACE 2 Pro measures 15.75 x 16.14 x 19.29 in, the SPARKX i7 measures 16.6 x 17.9 x 18.5 in, and the Nano Combo measures 18.5 x 16.65 x 17.95 in.
Multicolor printing means long run times and a hotend that stays hot for hours. Print in a ventilated space, keep hands clear of the hotend and the moving gantry, and keep filament dry and away from dust. Never leave a running printer where children or pets can reach it, and switch the printer off before clearing a jam or changing filament by hand.
Project Match
Match the project to the pick, using only what each listing states:
- Multicolor figurines, gaming gear and desktop accessories with the least purge waste: Creality SPARKX i7, which cuts purging waste by 50%.
- Long multicolor prints that must finish without a filament failure: SPARKX i7 Nano Combo, with auto refill and empty run detection.
- Fast enclosed multicolor printing in a shared room: Anycubic Kobra S1 ACE 2 Pro, at 600 mm/s and 44 dB with a fully enclosed CoreXY structure.
- PLA, PETG, ABS and ASA prints kept dry while printing: Anycubic Kobra S1 ACE 2 Pro, with 65°C active drying.
- Multicolor models on a compact desk footprint: SPARKX i7 Nano Combo, with a compact space-saving design.
FAQ: lasers and CNC
What is the best multi color 3d printer with least waste?
The Creality SPARKX i7 leads this guide because its listing states it cuts purging waste by 50% and improves overall printing efficiency by 15%. No other pick here states a purge figure, so the i7 is the clearest answer for least waste.
How many colors can a multicolor 3D printer print?
Four of the picks print 4 colors, with the Kobra S1 ACE 2 Pro expanding to 16 colors with 4 ACE 2 Pro units and the Kobra X reaching up to 19 colors. The SPARKX i7 prints multicolor with CFS Lite, and the listing does not state a color count for it.
Does multicolor printing waste a lot of filament?
It can, because every color change purges filament. The SPARKX i7 cuts purging waste by 50% according to its listing, and the Nano Combo prevents wasted filament with empty run detection that halts printing on breakage, tangling or an empty feed.
What build volume works for multicolor prints?
The SPARKX i7 and the Nano Combo offer 260 x 260 x 255 mm, and the Kobra S1 ACE 2 Pro offers 250 x 250 x 250 mm. Both Creality listings say that volume covers large items such as airless basketballs as well as intricate miniatures.
Is a filament dryer needed for multicolor printing?
A dryer helps when filament absorbs moisture, which causes humidity defects. The Kobra S1 ACE 2 Pro includes a dry box with 65°C active drying while printing, for PLA, PETG, ABS, ASA and other filaments.
Related: best multicolor 3d printer, best multi extruder 3d printer, best multicolor 3d printer filament, best 3d printer for small business and the fdm 3d printers hub.




