Best Abs Plastic 3D Printer Filament (2026)
1.75mm ABS filaments for FDM printers, compared by heat resistance, diameter accuracy, odor and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFLASHFORGE ABS Pro9.6/10View on Amazon - 2
Best Heat ResistancePolymaker ABS White9.6/10View on Amazon - 3
Best Two-Spool ValueCreality ABS 2-Pack9.5/10View on Amazon - 4
Best for Tough PartsELEGOO ABS Black9.4/10View on Amazon
A maker printing drone mounts, protective cases and tool housings needs a filament that holds up to heat and knocks. This guide compares the best abs plastic 3d printer filament for that kind of functional work, spool by spool, on what each listing states about heat resistance, diameter accuracy, odor and warranty. The picks suit different corners of the same job: tough parts, hot parts, big parts and printing with less odor.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FLASHFORGE ABS Pro: Reduced shrinkage, low odor, plus-or-minus 0.02mm accuracy and a stated 1 year warranty. Check price on Amazon
- Best Heat Resistance Polymaker ABS White: A 104°C Vicat softening temperature with full nozzle and bed settings in the listing. Check price on Amazon
- Best Two-Spool Value Creality ABS 2-Pack: A 2-pack with black and white spools, plus-or-minus 0.02mm accuracy and a stated 1 year warranty. Check price on Amazon
- Best for Tough Parts ELEGOO ABS Black: Strong layer adhesion and water resistance for drone mounts, cases and industrial tools. Check price on Amazon
Machines on the list

FLASHFORGE ABS Pro Filament 1.75mm Black
A 1.75mm ABS Pro spool with reduced shrinkage, low odor, plus-or-minus 0.02mm accuracy and a stated 1 year warranty.
Pros
- Diameter accuracy of plus-or-minus 0.02mm, with 99% size accuracy stated
- Reduced shrinkage and lower warping and cracking risks, per the listing
- Low odor, with strong bed adhesion and bridging that prevents delamination
- Hot deformation below 90°C for heat-resistant functional parts
Cons
- No nozzle or bed temperature guidance in the listing
- No enclosed-printer guidance in the listing
- The 99% size accuracy figure comes with no stated measurement method
- A 1 kg spool only; no larger pack is stated in this listing

Polymaker ABS Filament White 1KG 1.75mm
A 1.75mm white ABS spool with a 104°C Vicat softening temperature, plus-or-minus 0.03mm accuracy and full print guidance.
Pros
- Vicat softening temperature of 104°C for heat-resistant functional parts
- Full print guidance: nozzle 245 to 265°C, bed 90 to 100°C, cooling fan off
- Low odor from a specialty bulk-polymerized ABS resin
- Vacuum sealed with desiccant to protect the material from moisture
Cons
- No warranty term in the listing
- An enclosed printing chamber is recommended, mainly for larger parts
- If the spool absorbs moisture, drying takes 70°C for approximately 6 hours before printing
- Plus-or-minus 0.03mm accuracy, a wider figure than the plus-or-minus 0.02mm stated by FLASHFORGE and Creality

Creality ABS Filament 1.75mm, Black & White
A 2-pack of black and white 1.75mm ABS spools, 2 kg in total, with plus-or-minus 0.02mm accuracy and a stated 1 year warranty.
Pros
- A 2-pack with black and white spools, 2 kg in total
- Diameter accuracy of plus-or-minus 0.02mm
- Odorless and non-toxic, per the title and bullets
- A 1 year warranty with 12-month and 24 hours after-sales service stated
Cons
- No temperature figures are stated for heat, nozzle or bed
- The non-toxic claim comes with no stated basis in the listing

ELEGOO ABS 3D Printer Filament 1.75mm Black 1KG
A 1.75mm black ABS spool with strong layer adhesion, heat resistance up to 85°C and water resistance, built for enclosed FDM printers.
Pros
- Strong layer adhesion for functional parts
- Heat resistance up to 85°C, with water resistance
- Less-tangle winding and consistent feeding from a 1.75mm high-precision diameter
- Vacuum sealed to prevent moisture before use
Cons
- An enclosed printer is required, per the listing
- No warranty term in the listing
- No diameter accuracy figure is stated, only a 1.75mm diameter
- The listing title spells the spool as 'spooll'
Other machines to compare
Polymaker ABS Filament Grey 1KG 1.75mmCheck price on Amazon
Polymaker ABS Filament Orange 1KG 1.75mmCheck price on Amazon
Creality ABS Filament 1.75mmCheck price on Amazon
SUNLU High Speed ABS 3D Printer FilamentCheck price on Amazon
OVERTURE ABS High Strength 3D Printer Filament 1.75mmCheck price on Amazon
eSUN ABS+ Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Spool | Diameter accuracy | Heat figure | Odor | Warranty |
|---|---|---|---|---|---|---|---|
| FLASHFORGE ABS Pro | 9.6/10 | 1.75mm | 1 kg | +/-0.02mm | Below 90°C | Low odor | 1 year |
| Polymaker ABS White | 9.6/10 | 1.75mm | 1 kg | +/-0.03mm | 104°C Vicat | Low odor | Not stated |
| Creality ABS 2-Pack | 9.5/10 | 1.75mm | 2 kg (2-pack) | +/-0.02mm | Not stated | Odorless claim | 1 year |
| ELEGOO ABS Black | 9.4/10 | 1.75mm | 1 kg | Not stated | Up to 85°C | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026. All 4 spools are 1.75mm ABS for FDM printers. A cell that reads Not stated means the listing gives no figure for it.
What the listings tell you, and what they leave out
Creality and FLASHFORGE state a 1 year warranty term; ELEGOO and Polymaker state none. FLASHFORGE, Creality and Polymaker state a diameter accuracy figure; ELEGOO states only a 1.75mm diameter, with no plus-or-minus figure. Polymaker gives the fullest print guidance, with nozzle and bed temperatures and a drying step, while FLASHFORGE gives no nozzle or bed temperature at all.
Creality’s listing contradicts itself in the spec table. The title and bullets describe an ABS filament in a 2-pack, but the spec table lists the model as PETG and the item count as 1. The title and bullets win here: this is an ABS 2-pack, and the table rows look like copy errors. ELEGOO’s title has a smaller slip, spelling the spool as “spooll”.
Buying guide: choosing the best abs plastic 3d printer filament
ABS vs PLA
ABS suits parts that need heat and impact resistance: the listings rate it for drone mounts, protective cases, tools, housings, robotics and mechanical parts. PLA does not appear in these listings, so this guide makes no claim about PLA. For parts that need heat and impact resistance, the ABS listings make their case; for parts that do not, the listings give no reason to prefer ABS.
Heat resistance
The heat figures differ. Polymaker states a Vicat softening temperature of 104°C. FLASHFORGE states hot deformation below 90°C. ELEGOO states resistance up to 85°C. Creality states heat resistance with no temperature. Treat each figure as the maker’s own measure: a Vicat figure and a hot deformation figure are not the same measure, so they do not rank the spools on their own.
Diameter accuracy
A tighter diameter figure means steadier feeding. FLASHFORGE and Creality state plus-or-minus 0.02mm. Polymaker states plus-or-minus 0.03mm. ELEGOO states a 1.75mm diameter with no accuracy figure. Diameter is one part of steady feeding; ELEGOO and FLASHFORGE both describe winding and feeding in their listings.
Odor and ventilation
ABS printing gives off odor, and the listings handle it differently. Polymaker and FLASHFORGE both state low odor. Creality states odorless and non-toxic in the title and bullets. ELEGOO states no odor figure. Print in a ventilated space and follow the enclosed-printer guidance where the listing gives it.
ABS gives off odor while printing. Print in a ventilated space, use an enclosed printer where the listing asks for one, and follow the drying step in the listing before use.
Enclosed printers and warping
ABS warps as it cools, and an enclosed chamber keeps the print environment steady. ELEGOO requires an enclosed printer. Polymaker recommends an enclosed chamber, mainly for larger parts. FLASHFORGE states reduced shrinkage and lower warping and cracking risks. Creality states improved printing for large objects with edges and corners, with less layer separation, warping and splitting. Dry the spool before use where the listing asks for it: ELEGOO recommends drying before use, and Polymaker gives a drying step of 70°C for approximately 6 hours if the filament absorbs moisture.
Project Match
- Drone mounts, protective cases, rugged outdoor gear and industrial tools: ELEGOO ABS Black, which the listing rates for those uses.
- Functional prototypes, mechanical parts, robotics, tools, fixtures and replacement parts: Polymaker ABS White.
- Large objects with edges and corners: Creality ABS 2-Pack, with a black and a white spool.
- Action camera mounts, tools and electrical device housings: FLASHFORGE ABS Pro.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. Safety points need a stated safety feature in the listing, and warranty points need a stated warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FLASHFORGE ABS Pro | 9.6 | 32 | 21 | 21 | 4 | 2 |
| Polymaker ABS White | 9.6 | 32 | 22 | 21 | 4 | 0 |
| Creality ABS 2-Pack | 9.5 | 27 | 18 | 20 | 3 | 2 |
| ELEGOO ABS Black | 9.4 | 28 | 19 | 19 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What is ABS filament good for?
ABS filament suits functional parts that need strength, heat resistance and impact resistance. The listings name drone mounts, protective cases, rugged outdoor gear, industrial tools, functional prototypes, mechanical parts, robotics, fixtures, replacement parts, action camera mounts, tools and electrical device housings. It is a material for parts that work.
Is ABS filament better than PLA?
The listings in this guide state no PLA figures, so no direct comparison is possible from them. What they do state is why ABS fits functional parts: heat resistance up to 85°C on the ELEGOO spool, a Vicat softening temperature of 104°C on the Polymaker spool, and hot deformation below 90°C on the FLASHFORGE spool. For parts that need those heat and impact figures, the ABS listings make their case; for parts that do not, the listings give no reason to prefer ABS.
How to print with ABS filament?
Use an enclosed printer where the listing asks for one: ELEGOO requires an enclosed printer, and Polymaker recommends an enclosed chamber. Polymaker gives nozzle temperatures of 245 to 265°C and bed temperatures of 90 to 100°C, with the cooling fan turned off. Dry the spool before use where the listing asks for it: ELEGOO recommends drying before use, and Polymaker states drying at 70°C for approximately 6 hours if the filament absorbs moisture. FLASHFORGE states no pre-drying or parameter adjustments are needed for its spool.
Does ABS filament need drying before printing?
It depends on the spool. ELEGOO recommends drying before use, and Polymaker states drying at 70°C for approximately 6 hours if the filament absorbs moisture. FLASHFORGE states no pre-drying is needed for its spool, and Creality states keeping the product in a dry and ventilated environment.
Related: the 3D printers hub, best value PLA filament, PLA vs PVA filament, and PETG vs PC filament.




