Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

3D Printer Resin vs Filament Cost: Which One Should You Buy?

Resin comes in 1000g and 2000g bottles and a 4kg bundle, while filament skips the washing and curing steps, so the cheaper route depends on part size, resin type and post-processing.

3D Printer Resin vs Filament Cost: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1AHOWPD 3D Printer Stand with Filament StorageAHOWPD 3D Printer Stand with Filament Storage9.6/10View on Amazon
  2. 2iSANMATE 16KG Matte PLA Filament Bundle 1.75MM 30-300mm/s foriSANMATE 16KG Matte PLA Filament Bundle 1.75MM 30-300mm/s for9.7/10View on Amazon
  3. 3ELEGOO Saturn 4 12K Resin 3D PrinterELEGOO Saturn 4 12K Resin 3D Printer9.5/10View on Amazon
  4. 4ELEGOO Standard 3D Printer Resin Grey 1000gELEGOO Standard 3D Printer Resin Grey 1000gView on Amazon
  5. 5ELEGOO Upgraded 8K Standard 3D Printer Resin Space Grey 2000gELEGOO Upgraded 8K Standard 3D Printer Resin Space Grey 2000gView on Amazon
  6. 6ELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000gELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000gView on Amazon
  7. 7ELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 1000gELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 1000gView on Amazon
  8. 8ELEGOO ABS-Like 3.0+ 3D Printer Resin Clear Red 1000gELEGOO ABS-Like 3.0+ 3D Printer Resin Clear Red 1000gView on Amazon
  9. 9SUNLU 2000G ABS-Like 3D Printer ResinSUNLU 2000G ABS-Like 3D Printer ResinView on Amazon

A resin print and a filament print can look alike on a shelf, yet the money behind them works in different ways, and that difference is what 3d printer resin vs filament cost comes down to. Resin arrives as a liquid in bottles, and the print needs washing and curing after it leaves the machine. Filament arrives as a solid strand on a spool, and the print needs no washing and curing stage after it leaves the machine. The cheaper route depends on the size of the parts, the resin type, and how much post-processing a maker is willing to do.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

Resin prices vary by seller and bottle size, and the listings behind this guide state bottle sizes and resin types rather than prices. The comparison below follows the cost structure instead: what each route needs, and where the money goes.

3D Printer Resin vs Filament Cost: The Short Answer

Resin and filament charge for different things. Resin is sold by the bottle, and the listings behind this guide show 1000g bottles, a 2000g bottle and a 4kg bundle. Filament is sold by the spool, and the print needs no washing and curing stage after it leaves the machine. Resin also asks for more after the print: washing, curing and careful handling of a liquid. Filament asks for less after the print, and that gap is where the cost comparison is decided. Small, detailed parts tend to get more value from resin, while larger, plain parts tend to get more value from filament.

What Resin Costs: Bottle Sizes and Resin Types

The resins behind this guide are all grey, and all use 405nm UV light-curing. They split into standard resin, which aims for precision and a smooth finish, and ABS-like resin, which aims for strength and toughness. Bottle size sets the starting point, and resin type sets what the print can do.

ELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000g. This is the pick for parts that need to hold up. The listing describes high strength, impact resistance and toughness, with printed models that withstand drilling holes and certain impacts. It suits functional prototypes, mechanical parts and industrial parts. Its viscosity runs 25-47% lower than ABS-like 1.0 and ABS-like 2.0, which the listing links to faster curing and easier flow. It works with LCD and DLP printers that use 405nm UV light-curing, and works best with ELEGOO light-curing printers.

SUNLU 2000G ABS-Like 3D Printer Resin Grey 2KG. This is the larger ABS-like bottle, at 2000g, and the listing pitches it at miniature or tiny objects, calling it a first choice there. It claims less brittleness, more strength and strong abrasion resistance, plus fast curing and a very light odor. It suits 2K 4K 6K 8K LCD, DLP and SLA printers. Its leak-proof bottle design aims at less risk of leakage in transport. The spec table names the model ‘SUNLU Water-Wash ABS Resin’, while the title and bullets describe an ABS-like resin and never mention water-washing, so this guide follows the title and bullets.

ANYCUBIC 3D Printer Resin Bundle Grey 4kg. This is the bulk option: 4 packs of 1kg, 4kg in total. The listing describes low shrinkage, high precision, quick curing and a mix of rigidity and toughness, with easy removal of the model and accurate printing details. It works with all DLP and LCD printers, and works best with ANYCUBIC LCD printers. The listing also says to shake the bottle before use, so the color paste mixes evenly.

ELEGOO Standard 3D Printer Resin Grey 1000g. This is the plain standard resin of the group, for prints where precision and finish matter more than toughness. The listing describes low shrinkage, high precision and a smooth finish, with fast curing and good fluidity. It suits most DLP and LCD printers, and works best with LCD printers. It fits makers who want clean, detailed prints without ABS-like toughness.

What Filament Costs: Spools and a Shorter Finish

Filament takes the simpler cost path. It arrives as a solid strand wound on a spool, and the print needs no wash tank and no curing stage to run after it leaves the machine. That shorter finish is the main reason filament often looks cheaper per part for larger, plain prints. The trade is detail: filament builds in layers that often show, while resin hardens in fine layers for a smooth finish.

For makers who already run filament, the PLA filament for 3D printers guide covers the common spool options. The FDM 3D printer category gathers the machines that use filament. A related comparison, FDM vs resin 3D printer, weighs the resin and filament routes side by side.

The Extras That Change the Total

The bottle is only part of the resin bill. After printing, resin parts need washing and curing before they are ready to use, and that stage needs its own gear and space. Handling liquid resin also calls for gloves and a ventilated workspace, and the bottle needs a shake before use when the listing says so. ANYCUBIC states the shake step directly, and SUNLU notes a very light odor from its resin.

Packaging helps on the resin side: the ELEGOO Standard listing states a leak-proof bottle, SUNLU states a leak-proof bottle design, and ANYCUBIC packs its bottles in bubble wrap with a tight-fitting air bag. Filament skips all of this: a spool needs dry storage and a clear path into the machine, and the print needs no washing and curing stage. With the extras counted, resin suits makers who value fine detail enough to run the extra stage; filament suits makers who want no washing and curing stage after the print.

Which Route Fits Your Projects

Match the route to the part. Small, detailed models and miniatures fit resin, and the SUNLU listing names miniature or tiny objects directly. Parts that need to hold up under drilling and impacts fit ABS-like resin, and the ELEGOO ABS-like 3.0 listing names functional prototypes, mechanical parts and industrial parts. Plain standard resin fits clean display models, where the ELEGOO Standard listing states high precision and a smooth finish. Larger, plain parts fit filament, where the simpler finish keeps the workflow short.

A maker who prints in volume can lean on the ANYCUBIC bundle, with 4kg in total across 4 packs of 1kg. A maker who prints a mix of display pieces and tough parts can keep a standard resin and an ABS-like resin side by side, and pick by the part.

FAQ: lasers and CNC

How much does 3D resin cost?

There is no set figure, because the listings behind this guide state bottle sizes and resin types rather than prices. The bottles here run 1000g and 2000g, with a 4kg bundle for makers who print in volume. Standard resin and ABS-like resin also sit in different roles: standard resin aims for precision and a smooth finish, while ABS-like resin aims for strength and toughness.

How much do 3D resin printers cost?

The listings behind this guide cover resin, not printers, so no printer prices are stated here. A resin printer and a filament printer also carry different extras: the resin route adds washing and curing gear, while the filament route adds little beyond the spool. Compare the full setup, not the machine alone.

How to use a resin 3D printer safely?

Handle resin as a liquid that belongs in the machine and on the print, not on skin or worktops. Wear gloves, work in a ventilated area, and keep the bottle closed when it is not in use. Wash parts and run the curing stage after printing, and shake the bottle before use when the listing says so, as ANYCUBIC states for its resin.

Is resin 3D printing stronger than filament?

It depends on the resin type. ABS-like resin is built for strength: the ELEGOO ABS-like 3.0 listing describes high strength, impact resistance and toughness, with models that withstand drilling holes and certain impacts, and the SUNLU ABS-like listing describes less brittleness and strong abrasion resistance. Standard resin aims for precision and a smooth finish instead. The listings here do not compare resin with filament directly, so pick the resin type by the job, not by the material family.

What is the difference between standard resin and ABS-like resin?

Standard resin aims for precision: the ELEGOO Standard listing describes low shrinkage, high precision and a smooth finish, with fast curing and good fluidity. ABS-like resin aims for toughness: the ELEGOO ABS-like 3.0 listing describes high strength, impact resistance and toughness, and the SUNLU ABS-like listing adds less brittleness and strong abrasion resistance. For display models, standard resin fits. For parts that take knocks, ABS-like resin fits.

Related: the 3D printer hub, 3D printing resin vs UV resin and FDM vs resin 3D printer. Also see our how to price laser engraving work. Also see our how much you can make with a laser engraver.

More buying guides

3D Printers ·

How Much Does 3D Print Filament Cost?

A plain guide to what sets the cost of 3D print filament, from material and spool size to the print itself, and how to…