Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

What Is PETG CF Filament and What Printer Setup It Needs

A guide to PETG-CF filament: what the carbon fiber does, which hardened nozzle it needs, and how to match size and temperature rating to the print.

What Is PETG CF Filament and What Printer Setup It Needs
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 12 Pcs Upgraded 0.4mm A2L/H2D/H2S/H2C/X2D/P2S2 Pcs Upgraded 0.4mm A2L/H2D/H2S/H2C/X2D/P2S9.7/10View on Amazon
  2. 26PCS 0.2MM 0.4MM 0.6MM 0.8MM Hardened Nozzles6PCS 0.2MM 0.4MM 0.6MM 0.8MM Hardened Nozzles9.7/10View on Amazon
  3. 3Sahvaim 4Pack 0.2/0.4/0.6/0.8MM H2 Series/X2D/P2SSahvaim 4Pack 0.2/0.4/0.6/0.8MM H2 Series/X2D/P2S9.6/10View on Amazon
  4. 4FLASHFORGE Adventurer 5M Pro NozzleFLASHFORGE Adventurer 5M Pro Nozzle9.6/10View on Amazon

What is PETG CF filament, and what printer setup does it need? PETG CF is PETG with carbon fiber mixed in, and that fiber is what decides the setup. The fiber makes the filament abrasive, so a hardened steel nozzle holds up better than a standard nozzle, and the nozzle size and temperature rating have to match the print. The sections below cover the fiber, the nozzle size, the temperature rating, and the swap.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

None of the listings in this guide states a print temperature for PETG-CF, so this guide gives no temperature table. Check the nozzle rating against the temperature the filament maker names.

2 Pcs Upgraded 0.4mm A2L/H2D/H2S/H2C/X2D/P2S

2 Pcs Upgraded 0.4mm A2L/H2D/H2S/H2C/X2D/P2S

Bulto9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece 0.4 mm hotend pair with an MPVD low-friction coating, hardened steel, and a 350°C short-term rating for Bambu Lab printers.

Pros

  • MPVD coating keeps the 0.4 mm hotend clean and improves extrusion consistency, per the maker
  • Hardness up to 2800 HV for long-lasting performance with abrasive filaments
  • The maker names Bamboo PETG-CF as low clog risk with a hardened steel 0.4 mm nozzle
  • Withstands up to 350°C short-term and 300°C for continuous use

Cons

  • One size only: 0.4 mm, with no 0.2 mm, 0.6 mm or 0.8 mm option in the box
  • Made for Bambu Lab printers, so it fits no other printer family in this guide
  • No cleaning tool in the box for clearing a clog
  • Continuous use is rated to 300°C, below the 350°C short-term figure
6PCS 0.2MM 0.4MM 0.6MM 0.8MM Hardened Nozzles

6PCS 0.2MM 0.4MM 0.6MM 0.8MM Hardened Nozzles

HzdaDeve9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-piece hardened stainless steel nozzle kit in 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm sizes, rated to 350°C, for Elegoo Centauri Carbon printers.

Pros

  • 6 nozzles in the box: 1 x 0.2 mm, 3 x 0.4 mm, 1 x 0.6 mm and 1 x 0.8 mm
  • Rated to 350°C with stable heat transfer and uniform melting, per the maker
  • Hardened stainless steel suits abrasive filaments and composite filaments
  • Smooth, burr-free internal channel reduces friction and the risk of blockage

Cons

  • Made for Elegoo Centauri Carbon, CC and CC2 printers only
  • Only one 0.6 mm and one 0.8 mm nozzle in the box, with three 0.4 mm nozzles
  • No hotend in the box, so it replaces nozzles only
  • The 0.2 mm nozzle suits detailed models, not larger functional prints
Sahvaim 4Pack 0.2/0.4/0.6/0.8MM H2 Series/X2D/P2S

Sahvaim 4Pack 0.2/0.4/0.6/0.8MM H2 Series/X2D/P2S

SAHVAIM9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack hotend kit with 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm hardened steel nozzles, a titanium-alloy throat tube, and a 30-second swap for Bambu Lab printers.

Pros

  • 4 hotends in the kit, one in each size from 0.2 mm to 0.8 mm
  • Titanium-alloy throat tube with a 0.25 mm wall thickness enhances durability, per the maker
  • Smooth inner walls with a Ra 0.4 throat tube and nozzle reduce clogs
  • 30-second nozzle replacement for convenient maintenance, per the maker

Cons

  • Made for Bambu Lab H2D, H2S, H2C, X2D and P2S printers only
  • Needs a 5.0 mm hex wrench and a 3.0 mm socket wrench for a swap
  • One hotend per size, so a worn 0.4 mm nozzle leaves no spare in that size
  • The nozzle needs preheating to 250°C for installation or removal
FLASHFORGE Adventurer 5M Pro Nozzle

FLASHFORGE Adventurer 5M Pro Nozzle

FLASHFORGE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 0.6 mm hardened nozzle with a 280°C maximum temperature, a 32 mm³/s high flow rate, and tool-free removal in 3 seconds for the Adventurer 5M.

Pros

  • High-flow 32 mm³/s nozzle for stable high-speed printing, per the maker
  • Maximum temperature support of 280°C, and it heats to 200°C in 35 seconds
  • Tool-free quick removal in 3 seconds with the press of a button
  • The 0.6 mm size is built for abrasive filaments such as carbon fiber

Cons

  • One 0.6 mm nozzle only, so the 0.25 mm, 0.4 mm and 0.8 mm sizes need another purchase
  • 280°C maximum temperature, the lowest rating in this guide
  • Fits the Adventurer 5M hotend only
  • The 0.6 mm size suits larger prints, not fine detail work

What is PETG-CF filament: what is petg cf filament

PETG-CF is PETG filament with carbon fiber in the mix, and the fiber makes it abrasive. A standard nozzle wears sooner on abrasive filament, so the listings here answer with hardened steel: HzdaDeve calls its nozzle better suited for abrasive filaments than standard nozzles, and the FLASHFORGE 0.6 mm and 0.8 mm nozzles are built to withstand abrasive filaments such as carbon fiber. The Bulto hotend (on Amazon) names Bamboo PETG-CF as low clog risk with a hardened steel 0.4 mm nozzle, per its maker. The nylon vs carbon fiber filament guide compares carbon fiber filaments, and the best 3D printing filament guide compares filament types.

Step 1: Fit a hardened steel nozzle

Start with the nozzle material: the carbon fiber is what wears it. All four picks in this guide are hardened nozzles: the HzdaDeve kit is hardened stainless steel, the Sahvaim kit uses hardened materials with a titanium-alloy throat tube, the Bulto hotend is hardened steel with an MPVD coating, and the FLASHFORGE nozzle (on Amazon) is built from high-strength materials. The MPVD coating on the Bulto hotend creates a smooth, low-adhesion surface that prevents filament buildup, nozzle clogging and material sticking, per its maker. Fit hardened steel before printing PETG-CF.

Step 2: Pick the nozzle size

Nozzle size sets the balance between detail and flow. The 0.2 mm nozzle suits detailed and precision models, the 0.4 mm nozzle balances print quality and speed, and the 0.6 mm and 0.8 mm nozzles deliver increased material flow for larger and functional prints, per HzdaDeve. The FLASHFORGE series adds a 0.25 mm size for high precision and fine detail, while its 0.4 mm size balances versatility and performance. For PETG-CF, the Bulto maker names the 0.4 mm hardened steel nozzle for low clog risk. Pick the size from the print. The 3D printer extruder parts guide covers nozzle types and replacement.

Step 3: Check the temperature rating

A nozzle has a maximum temperature, and the rating differs across the picks here. The FLASHFORGE nozzle supports a maximum temperature of 280°C, the HzdaDeve nozzles (on Amazon) are rated to 350°C, and the Bulto hotend withstands up to 350°C short-term and 300°C for continuous use. The Sahvaim kit gives no maximum temperature; it names 250°C as the preheat temperature for installation or removal. Check the rating before buying, and match it to the temperature the filament maker names for PETG-CF. The 3D printer nozzle temperature by filament type guide lists temperatures by filament.

Step 4: Swap the nozzle and keep it flowing

A swap should be quick. The FLASHFORGE nozzle removes tool-free in 3 seconds with the press of a button, and it heats to 200°C in 35 seconds. The Sahvaim kit allows a 30-second nozzle replacement, and it needs a 5.0 mm hex wrench and a 3.0 mm socket wrench, with the nozzle preheated to 250°C for installation or removal. Its maker also says to let the hotend cool before a replacement to prevent burns, so follow the replacement guide that comes with the kit for the order of the steps. The HzdaDeve channel is smooth and burr-free to reduce friction and the risk of blockage, and the Bulto MPVD coating resists sticking. The why is my 3D printer not printing guide covers clog checks and cleaning.

Step 5: Match the nozzle to the printer

The nozzle also has to match the printer. The FLASHFORGE nozzle fits the Adventurer 5M hotend, the Sahvaim kit fits Bambu Lab H2D, H2S, H2C, X2D and P2S printers, the HzdaDeve kit fits Elegoo Centauri Carbon, CC and CC2 printers, and the Bulto hotend fits Bambu Lab P2S, X2D, H2D, H2S, A2L and H2C printers. The HzdaDeve nozzles fit 1.75 mm filament systems. Check the printer model before ordering, because a nozzle made for a different printer family does not fit.

The gear for printing PETG-CF

Each step above needs a hardened nozzle that fits the printer: hardened steel for the fiber, the size the print needs, and a rating that covers the job.

Common mistakes to avoid

  • Printing PETG-CF through a standard nozzle instead of hardened steel.
  • Picking the 0.2 mm nozzle for a large functional print that needs flow.
  • Buying a nozzle rated below the temperature the print needs.
  • Ordering a nozzle made for another printer family.

What is PETG-CF filament: the short version

  1. PETG-CF is PETG with carbon fiber in it, and the fiber is abrasive.
  2. Fit a hardened steel nozzle before printing PETG-CF.
  3. Pick 0.2 mm for detail, 0.4 mm for balance, and 0.6 mm or 0.8 mm for flow and larger prints.
  4. Check the temperature rating: 280°C on the FLASHFORGE nozzle, up to 350°C on the HzdaDeve and Bulto hotends.
  5. Follow the maker’s replacement guide for the swap.
  6. Match the nozzle to the printer model, not just the size.

FAQ: lasers and CNC

What is PETG-CF filament?

PETG-CF is PETG with carbon fiber mixed in. The fiber makes the filament abrasive, so it needs a hardened steel nozzle, and the Bulto maker names PETG-CF as low clog risk with a hardened steel 0.4 mm nozzle.

Can PETG-CF print through a standard nozzle?

The listings here do not promise it. HzdaDeve states its hardened steel nozzle is better suited for abrasive filaments than standard nozzles, and the FLASHFORGE 0.6 mm and 0.8 mm nozzles are built to withstand abrasive filaments such as carbon fiber. Fit hardened steel for PETG-CF.

What nozzle size is best for PETG-CF?

The 0.4 mm size is the balanced pick: it balances print quality and speed, per HzdaDeve, and the Bulto maker names it for PETG-CF with low clog risk. Use 0.2 mm for detail and 0.6 mm or 0.8 mm for flow and larger prints.

What temperature can these nozzles handle?

The FLASHFORGE nozzle supports a maximum temperature of 280°C, and the HzdaDeve nozzles are rated to 350°C. The Bulto hotend withstands up to 350°C short-term and 300°C for continuous use. None of the listings states a print temperature for PETG-CF, so check the temperature the filament maker names.

How do I change a hardened nozzle?

The FLASHFORGE nozzle removes tool-free in 3 seconds with the press of a button. The Sahvaim kit allows a 30-second nozzle replacement; its maker says to preheat the nozzle to 250°C for installation or removal, and also to let the hotend cool before a replacement to prevent burns, so follow the replacement guide that comes with the kit for the order of the steps.

Which printers do these nozzles fit?

The FLASHFORGE nozzle fits the Adventurer 5M hotend. The Sahvaim kit fits Bambu Lab H2D, H2S, H2C, X2D and P2S printers, and the Bulto hotend fits Bambu Lab P2S, X2D, H2D, H2S, A2L and H2C printers. The HzdaDeve kit fits Elegoo Centauri Carbon, CC and CC2 printers and 1.75 mm filament systems.

Related: the 3D printers hub, 3D printer nozzle temperature by filament type and nylon vs carbon fiber filament. Also see the best FDM 3D printing filament guide. Also see the how to store 3D filament guide.

More buying guides

3D Printers ·

Best PETG Filament for Bambu A1 (2026)

Five PETG filaments for the Bambu A1, from the RFID refill made for Bambu printers to two-color and single-spool packs, compared by tolerance and…