Qidi Plus4 vs Creality K2 Plus: Which One Should You Buy?
A 0.4 mm bimetal nozzle for the QIDI Plus4 and an extruder kit for the Creality K2 Plus compared on materials, force and sensors.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Official QIDI PLUS4 0.4mm Bimetal Nozzle (2PCS)9.5/10View on Amazon - 2
Creality Official K2 Plus Extruder Kit9.5/10View on Amazon
A maker who sells printed parts knows the feeling: a roll of carbon-fiber filament on the shelf, a customer asking for a bracket that survives a hot car, and a printer that keeps stringing. The nozzle and the extruder decide whether that filament prints clean or clogs halfway through. This qidi plus4 vs creality k2 plus comparison puts two upgrade parts side by side, a bimetal nozzle for the QIDI Plus4 and an extruder kit for the Creality K2 Plus.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the QIDI Plus4 nozzle is the pick for printing abrasive carbon-fiber filament and high-temp plastics, with a hardened steel tip and a ceramic throat against clogs. The Creality K2 Plus extruder kit is the pick for a maker who wants high-force, steadier feeding with a filament break sensor. Choose by the job your printer struggles with.
Machines on the list

Official QIDI PLUS4 0.4mm Bimetal Nozzle (2PCS)
A 0.4 mm bimetal nozzle with a hardened steel tip and copper body, ready for 370°C, with a ceramic throat, sold as a pack of two for the QIDI Plus4.
Pros
- Hardened steel tip for wear resistance with abrasive carbon-fiber filaments (PPS-CF, PA-CF)
- Ready for 370°C, for high-temp plastics (PC, PA)
- Integrated ceramic throat acts as a heat barrier against heat creep and clogs
- Two nozzles in the pack, a spare or an instant upgrade
Cons
- No warranty term is stated in the listing
- No safety listing is stated
- 0.4 mm only, no other nozzle size is listed

Creality Official K2 Plus Extruder Kit
An official Creality extruder kit for the K2 Plus with a built-in filament break sensor, high-hardness dual gears and up to 80N of extrusion force.
Pros
- Up to 80N of extrusion force with a 6.25:1 reduction ratio
- Built-in filament break sensor with zero-distance detection
- High-hardness, wear-resistant dual gears for fiber-reinforced filaments
- Compact at 80g and 47 x 40 x 23.5 mm
Cons
- No warranty term is stated in the listing
- No safety listing is stated
- Force depends on the filament, per the listing
- Fits the K2 Plus, K1 Pro and K2 only, as listed
Other machines to compare
Creality K2 Plus Combo 3D PrinterCheck price on Amazon
Creality K2 Plus Combo 2026 Multi Color 3D Printer with CFSCheck price on Amazon
Creality K2 Plus Combo 3D Printer Multi Color Printing withCheck price on Amazon
Creality PLA Plus 3D Printer Filament Multicolor ChristmasCheck price on Amazon
Creality K2 Plus Build Plate Epoxy Resin Coating 370x370mmCheck price on Amazon
Creality 2026 New Space Pi V2 Plus Filament DryerCheck price on Amazon
Qidi plus4 vs creality k2 plus: side by side
| Spec | QIDI Plus4 side | Creality K2 Plus side | Notes |
|---|---|---|---|
| HQ Score | 62 | 61 | Raw totals |
| Part | Bimetal nozzle, 0.4 mm | Extruder kit | Different parts |
| Temperature | Ready for 370°C | Not stated | Stated only for the QIDI side |
| Extrusion force | Not stated | Up to 80N | Stated only for the Creality side |
| Filament sensor | Not stated | Built-in filament break sensor | Stated only for the Creality side |
| Gears | Not stated | High-hardness dual gears | Stated only for the Creality side |
| Heat barrier | Integrated ceramic throat | Not stated | Stated only for the QIDI side |
| Pack | Two nozzles | Not stated | Title and bullets say two; the spec table lists 1 |
| Size | 0.4 mm nozzle | 47 x 40 x 23.5 mm | Different measures |
| Weight | Not stated | 80g | Stated only for the Creality side |
| Fits | QIDI Plus4 | K2 Plus, K1 Pro, K2 | Title names K2 Pro; bullets name K1 Pro |
| Warranty | Not stated | Not stated | Neither states a warranty |
These numbers come straight from each maker’s listing and are rated, not measured by us (6 November 2026).
Extrusion force and feeding
Only the Creality listing states a force figure: up to 80N of extrusion force through a 6.25:1 reduction ratio, with high-hardness dual gears for smooth feeding. The QIDI listing states no force figure; it talks about flow instead, with a copper body for thermal conductivity and engineering that the maker says reduces stringing. The comparison cannot call either side stronger on force: only the extruder kit states one. The nozzle listing states clog resistance instead, through an integrated ceramic throat that acts as a heat barrier.
Materials and filament
The QIDI nozzle is built for tough filament. The maker says the copper alloy and hardened steel combo handles abrasive carbon-fiber filaments (PPS-CF, PA-CF) and high-temp plastics (PC, PA) at up to 370°C. The extruder kit takes the same problem from the feeding side: its high-hardness, wear-resistant dual gears stand up to fiber-reinforced filaments, and the maker says that extends the lifespan of the kit. See the PETG vs PC filament guide for how PC behaves in a print.
Heat and clogs
Heat is where the nozzle listing makes its case. The integrated ceramic throat acts as a heat barrier, and the maker says it virtually eliminates heat creep and the clogs that ruin long prints. The extruder kit states no temperature figure; its answer to a failed print is different, a built-in filament break sensor that identifies feeding interruptions and alerts the user.
Fit and size
Each part fits its own printer. The nozzle fits the QIDI Plus4, in a 0.4 mm size. The extruder kit is designed for the K2 Plus, K1 Pro and K2, per the bullets, though the title names K2 Pro instead of K1 Pro, so check the listing before ordering for either model. The listing gives its size as 47 x 40 x 23.5 mm at 80g. The nozzle listing states no weight and no outer dimensions beyond the 0.4 mm size. See the nozzle size guide for how nozzle size shapes a print.
Pack and value
The nozzle comes as a pack of two, per the title and the bullets, which call it a reliable spare. The spec table lists NumberOfItems as 1, which disagrees with the title and bullets; the title and bullets win here, so the pack holds two nozzles. The extruder kit is a single kit with the sensor and gears built in. Neither listing states a warranty term, so neither side scores on warranty.
Support and warranty
Neither listing states a warranty term. The extruder kit is sold as 100% Creality Official and the nozzle as Official QIDI, so both come from the printer makers. With no warranty term stated, check the listing before ordering.
Choose the QIDI Plus4 nozzle if
- You print abrasive carbon-fiber filament such as PPS-CF or PA-CF.
- You print high-temp plastics such as PC or PA, up to 370°C.
- You want a spare nozzle in the pack for long prints.
Choose the Creality K2 Plus extruder kit if
- You want up to 80N of extrusion force with dual-gear feeding.
- You want a filament break sensor that alerts you when feeding stops.
- You print fiber-reinforced filament and want gears that resist wear.
For more on the K2 Plus, see Creality K2 Plus vs Ender 3 V3.
A nozzle rated for 370°C stays hot long after a print ends. Let the hot end cool before a nozzle swap and keep fingers clear of the extruder gears while the printer runs.
Project Match
- Abrasive carbon-fiber filament (PPS-CF, PA-CF): the QIDI nozzle, with a hardened steel tip for wear resistance.
- High-temp plastics (PC, PA) up to 370°C: the QIDI nozzle, with a copper body for thermal conductivity.
- Feeding fiber-reinforced filament: the K2 Plus extruder kit, with high-hardness dual gears.
- Catching a filament break mid-print: the K2 Plus extruder kit, with a built-in filament break sensor.
FAQ: lasers and CNC
Can the QIDI nozzle print carbon-fiber filament?
Yes, per the listing. The maker says the hardened steel tip and copper body handle abrasive carbon-fiber filaments such as PPS-CF and PA-CF, and the nozzle is ready for 370°C.
How strong is the K2 Plus extruder kit?
The maker states up to 80N of extrusion force through a 6.25:1 reduction ratio, depending on the filament. The dual gears are high-hardness and wear-resistant.
Does the extruder kit detect a filament break?
Yes. The kit has a built-in filament break sensor with zero-distance detection, and the maker says it accurately identifies feeding interruptions and promptly alerts the user.
How many nozzles come in the QIDI pack?
Two, per the title and the bullets. The spec table lists NumberOfItems as 1, which disagrees with the title and bullets; the title and bullets win here.
Does either listing state a warranty?
No. Neither listing states a warranty term. Both are official maker parts, the nozzle as Official QIDI and the extruder kit as 100% Creality Official.
Related: nozzle size comparison, Anycubic Kobra S1 vs Creality K2 SE, best nozzle for Bambu Lab P1S and the FDM 3D printers category.




