Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Qidi Plus4 vs Bambu Lab A1: Which One Should You Buy?

The QIDI Box adds multi-color printing and 65°C active drying to the Plus4, while the Biaysan spool gives the A1 side a reusable AMS spool built for use up to 90°C.

Qidi Plus4 vs Bambu Lab A1: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1QIDI Box Multi-Color 3D Printing System for QIDIQIDI Box Multi-Color 3D Printing System for QIDI9.5/10View on Amazon
  2. 2Original Reusable Split Spool for Bambu Lab AMSOriginal Reusable Split Spool for Bambu Lab AMS9.3/10View on Amazon

Choosing between the Qidi Plus4 and the Bambu Lab A1 comes down to how each machine grows with a maker. One side leans on add-ons that open multi-color printing and filament drying, while the other side shows its strength in a practical accessory that keeps filament handling simple. This qidi plus4 vs bambu lab a1 comparison works through what each side’s accessory listings state, using the QIDI Box multi-color system and a reusable split spool as concrete examples. Neither listing describes the printer itself.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: the QIDI Box is the more capable add-on, with multi-color printing, 65°C active drying and NFC intelligent recognition for the Plus4. The Biaysan spool is the simpler add-on, a reusable AMS spool for the A1 side that handles filament up to 90°C. Pick the Plus4 side for multi-color work and dry filament; pick the A1 side for straightforward filament handling.

Machines on the list

QIDI Box Multi-Color 3D Printing System for QIDI

QIDI Box Multi-Color 3D Printing System for QIDI

R QIDI TECHNOLOGY9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A multi-color printing system for the QIDI PLUS4 with 65°C active drying, NFC intelligent recognition and a dual hardened steel gear extruder.

Pros

  • Up to 16 colors or materials when multiple QIDI BOX units are cascaded
  • 65°C active drying with real-time humidity monitoring for moisture-sensitive filament
  • NFC intelligent recognition identifies official QIDI filaments and loads settings
  • Dual hardened steel gear extruder handles CF and GF composites

Cons

  • Designed only for the QIDI PLUS4, so it adds nothing to other printers
  • Reaching 16 colors needs multiple QIDI BOX units
  • No warranty term is stated in the listing
  • NFC recognition is stated for official QIDI filaments
Original Reusable Split Spool for Bambu Lab AMS

Original Reusable Split Spool for Bambu Lab AMS

Biaysan9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A reusable split spool for Bambu Lab AMS, built for tool-free modular assembly and filament use up to 90°C.

Pros

  • Tool-free modular assembly with precision locking
  • Withstands use up to 90°C for ABS, ASA and Nylon
  • Tailored for Bambu Lab AMS, with fit for the X1, P1 and A1 series
  • Built to resist deformation under frequent use and high ambient temperatures

Cons

  • No warranty term is stated in the listing
  • Color choice is gray-white or transparent only
  • It is a spool, not a printer upgrade: it adds no new printing capability
  • No dimensions or weight are stated in the listing

Other machines to compare

Side by side

Spec QIDI Box for Plus4 Biaysan Split Spool Notes
HQ Score 65 49 QIDI Box leads
Type Multi-color system for QIDI PLUS4 Reusable split spool for Bambu Lab AMS One system, one spool
Multi-color Up to 16 colors or materials with cascaded units Not stated in the listing QIDI Box only
Active drying 65°C active drying with real-time humidity monitoring Not stated in the listing QIDI Box only
Filament recognition NFC intelligent recognition Not stated in the listing QIDI Box only
Extruder Dual hardened steel gear Not stated in the listing QIDI Box only
Materials stated PLA, PETG, ABS, CF, GF, PA, PC ABS, ASA, Nylon QIDI Box lists a wider set
Temperature 115°C thermal fuse Withstands up to 90°C Not comparable: a fuse threshold vs a use-temperature rating
Compatibility Designed for QIDI PLUS4 X1, P1 and A1 series Each fits its own brand
Weight 13.0 pounds Not stated in the listing QIDI Box only
Dimensions 14.1 x 9.2 x 11.8 inches Not stated in the listing QIDI Box only
Warranty Not stated in the listing Not stated in the listing Neither states a warranty

Specs are what each manufacturer publishes as its rating on the listing, collected 6 November 2026.

qidi plus4 vs bambu lab a1: multi-color printing and materials

The QIDI Box is built around color. It supports up to 16 colors or materials by cascading multiple QIDI BOX units, and the listing says it handles dissolvable support materials, which simplifies post-processing. The Biaysan spool plays no multi-color role, and its listing states no color printing capability.

Materials split the same way. The QIDI Box listing names PLA, PETG, ABS, CF, GF, PA and PC, and its dual hardened steel gear extruder is built for abrasive carbon-fiber and glass-fiber composites. The spool listing names ABS, ASA and Nylon, and says the spool withstands use up to 90°C.

Filament drying and storage

Drying is the QIDI Box second strength. Its 65°C active drying system runs during printing, with a real-time humidity display for monitoring the internal environment, and the listing says the drying actively prevents bubbles and clogs. The listing names Nylon (PA) and PVA as the moisture-sensitive filaments this suits. For how PVA compares with PLA, see PLA vs PVA filament.

The spool listing states no drying feature. It is built to resist deformation under frequent use and high ambient temperatures, but it dries nothing on its own. For dedicated drying hardware, see best filament dryer for nylon.

Compatibility and fit

The QIDI Box is designed to work with the QIDI PLUS4, and the listing says it connects to unlock multi-color and multi-material capability on that machine. The Biaysan spool is tailored for Bambu Lab AMS and fits the X1, P1 and A1 series, with a split-style quick assembly and precision locking that needs no tools.

Neither listing claims cross-brand fit: the QIDI Box serves the Plus4 only, and the spool serves Bambu Lab AMS only.

Safety features

The QIDI Box listing states a 115°C thermal fuse, filament run-out and tangle detection, dual thermal sensors and automatic shutdown. Detection pauses prints when filament runs out or tangles.

The spool listing states no safety features. It is a passive part with a matte gray-white finish, offered in gray-white or transparent.

Choose the Qidi Plus4 side if

  • You want multi-color printing, with support for up to 16 colors or materials through cascaded units.
  • You print Nylon (PA) or PVA and want 65°C active drying with humidity monitoring.
  • You print CF or GF composites and want a dual hardened steel gear extruder.

Choose the Bambu Lab A1 side if

  • You want a reusable spool for Bambu Lab AMS that fits the X1, P1 and A1 series.
  • You print ABS, ASA or Nylon and want a spool that withstands use up to 90°C.
  • You want tool-free modular assembly with precision locking.
Safety

The QIDI Box listing states a 115°C thermal fuse, filament run-out and tangle detection, dual thermal sensors and automatic shutdown. The spool listing states no safety features.

Project Match

  • Multi-color models: QIDI Box, up to 16 colors or materials through cascaded units, with dissolvable support materials.
  • Moisture-sensitive filament (Nylon PA, PVA): QIDI Box, with 65°C active drying and real-time humidity monitoring.
  • Abrasive composites (CF, GF): QIDI Box, with a dual hardened steel gear extruder.
  • High-temperature filament (ABS, ASA, Nylon): Biaysan spool, built for use up to 90°C.
  • Everyday AMS filament handling: Biaysan spool, tool-free modular assembly with precision locking.

FAQ: lasers and CNC

Does the Qidi Plus4 print in multiple colors?

The printer listing itself is not part of this comparison, but the QIDI Box add-on for the Plus4 supports up to 16 colors or materials through cascaded units, and it handles dissolvable support materials.

What does the QIDI Box do for filament?

It adds 65°C active drying with real-time humidity monitoring, NFC intelligent recognition for official QIDI filaments, and a dual hardened steel gear extruder for CF and GF composites.

Does the Biaysan spool work with the Bambu Lab A1?

Yes. The listing says the spool is tailored for Bambu Lab AMS and fits the X1, P1 and A1 series, with tool-free modular assembly and precision locking.

Which side suits high-temperature filament?

The spool listing is the one that frames its product for high-temperature filament: it withstands use up to 90°C and names ABS, ASA and Nylon. The QIDI Box lists ABS and PA among the materials its extruder handles, and its 65°C figure is a drying temperature, not a print-temperature rating, so the two figures cannot be compared directly.

Can the Biaysan spool dry filament?

No. The spool listing states no drying feature; drying on the Plus4 side comes from the QIDI Box, with 65°C active drying and real-time humidity monitoring.

Related: Qidi Plus4 vs Creality K2 Plus, Bambu Lab A1 vs P2S and best filament dryer for nylon.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.