Creality K2 Plus vs Ender 3 V3: Which One Should You Buy?
Two Creality upgrade kits, one a nozzle set for the K2 Plus and one a hotend kit for the Ender 3 V3 SE and KE, compared on the specs each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Creality Official Ender 3 V3 SE/3 V3 KE Upgrade9.6/10View on Amazon - 2
Creality K2 Plus Nozzle, K2 Pro Hotend Nozzles9.6/10View on Amazon
A new project is waiting on the bench: a bracket that has to fit, a part a customer asked for by name. The choice in a creality k2 plus vs ender 3 v3 search usually starts with the printers themselves, and the two listings here are the parts that keep those printers running: a nozzle kit for one side and a hotend kit for the other.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the Ender 3 V3 hotend kit is the stronger listing, with stated figures for temperature, speed, flow and heat-up that the K2 Plus nozzle kit does not give. The K2 Plus kit is the better spare-parts buy, with 4 nozzles in 3 sizes. Neither listing is the printer itself.
Machines on the list

Creality Official Ender 3 V3 SE/3 V3 KE Upgrade
An upgrade hotend kit for the Ender 3 V3 SE and KE, with a quick-swap nozzle, ceramic heating block, 300°C support and 600 mm/s printing.
Pros
- Supports 300°C high temperature
- 600 mm/s high-speed printing, up to 32 mm³/s flow
- Heats to 200°C in 40 seconds
- Titanium alloy heat break with copper alloy and hardened steel nozzle
Cons
- No nozzle size stated
- No warranty term stated
- No safety feature stated
- Fits the Ender 3 V3 SE and KE only, per the listing

Creality K2 Plus Nozzle, K2 Pro Hotend Nozzles
A 4-piece nozzle kit for the Creality K2 Plus, K2, K2 Pro and Hi Combo, with 0.4, 0.6 and 0.8 mm nozzles; the listing names titanium alloy, copper alloy and hardened steel.
Pros
- 4 nozzles in 3 sizes: 0.4, 0.6 and 0.8 mm
- Titanium alloy, copper alloy and hardened steel named in the listing
- Enlarged chamber for higher flow and faster speed, per the listing
- Quick-swap all-metal integrated design
Cons
- No temperature, speed or flow figure stated
- No warranty term stated
- No safety feature stated
- Names no specific filament
Other machines to compare
Comgrow Ender 3 V3 KE PEI Spring Steel 235x235mmCheck price on Amazon
Creality K2 Plus Combo 3D PrinterCheck price on Amazon
Creality Ender 3 V3 SE 3D Printer Bundle with PLA Filament 4Check price on Amazon
Creality K2 Plus Combo 2026 Multi Color 3D Printer with CFSCheck price on Amazon
Creality K2 Plus Combo 3D Printer Multi Color Printing withCheck price on Amazon
Creality Ender-3 V3 Neo Combo Multicolor 3D PrinterCheck price on Amazon
Side by side
| Spec | Ender 3 V3 Hotend Kit | K2 Plus Nozzle Kit | Notes |
|---|---|---|---|
| HQ Score | 60 | 57 | Higher is better |
| What it is | Upgrade hotend kit | Nozzle replacement kit | Neither listing is the printer itself |
| Nozzle sizes | Not stated | 0.4, 0.6 and 0.8 mm (4 pieces) | K2 kit only |
| Max temperature | 300°C | Not stated | Ender kit only |
| Max speed | 600 mm/s | Not stated | Ender kit only |
| Flow rate | Up to 32 mm³/s | Not stated | Ender kit only |
| Heat-up | 200°C in 40 seconds | Not stated | Ender kit only |
| Materials | Titanium alloy, copper alloy, hardened steel | Titanium alloy, copper alloy, hardened steel | Both list the same three materials |
| Filaments named | Hyper PLA, PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF | None named; most high and low temperature filaments | Ender kit names its filaments |
| Warranty | Not stated | Not stated | Neither listing states one |
Size and performance figures are the brand’s ratings quoted from listings on 5 November 2026.
Creality K2 Plus vs Ender 3 V3: nozzles and hotend
The two kits solve different problems. The K2 Plus listing is a replacement nozzle kit: 4 pieces in 0.4, 0.6 and 0.8 mm, made to swap onto the K2 Plus, K2, K2 Pro and Hi Combo. The Ender listing is an upgrade hotend kit for the Ender 3 V3 SE and KE, with a quick-swap nozzle kit and a ceramic heating block.
A nozzle kit is judged on the sizes and materials it covers, while a hotend kit is judged on temperature, speed and flow. The Ender kit states all three; the K2 kit states none of them.
Speed, flow and temperature
The Ender kit lists the numbers a speed-minded maker looks for: support for 300°C, printing at 600 mm/s, flow up to 32 mm³/s, and heat-up to 200°C in 40 seconds. The listing credits a 360° surround ceramic heater for the fast, even heating, and an enlarged nozzle chamber for the flow.
The K2 kit lists no temperature, speed or flow figure at all. Its listing claims a higher flow rate and faster print speed, but gives no number to check those claims against.
Materials and filaments
Both kits list the same three materials: titanium alloy, copper alloy and hardened steel. The K2 kit describes a copper alloy and hardened steel nozzle with an enlarged chamber. The Ender kit puts titanium alloy in the heat break and copper alloy and hardened steel in the nozzle.
Filaments split the two. The Ender kit names Hyper PLA, PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF and PET-CF. The K2 kit names none. If you print PLA-CF, PA-CF or PET-CF, the Ender kit names them and lists a hardened steel nozzle; the K2 kit lists hardened steel too, but names no filament.
Build and swapping
Both kits use an all-metal integrated design that swaps quickly. The K2 kit describes quick assembly and easy replacement, with thermal grease in the package to fill small thermal gaps, a smooth inner wall for smooth filament feeding, and no burrs at the aperture. The Ender kit describes a quick-swap nozzle with a split-design heat sink in red copper, which the listing says improves heat dissipation.
The K2 kit adds that its connections are tightly fitted to prevent filament leakage. Neither listing states a weight, a dimension or a warranty term.
Safety and heat
The Ender kit supports 300°C, and a hotend that hot burns on contact, so let it cool before any nozzle swap and keep fingers clear while it is hot. Both kits are upgrade parts, not enclosed machines. Print in a ventilated space.
Support and warranty
Neither listing states a warranty term, so both score 0 for warranty. The K2 kit calls itself 100% original Creality, and the Ender kit calls itself 100% Creality official.
Choose the Ender 3 V3 Hotend Kit if
- You want stated performance figures: 300°C, 600 mm/s and flow up to 32 mm³/s.
- You print the filaments it names, from PLA and TPU to PLA-CF, PA-CF and PET-CF.
- You own an Ender 3 V3 SE or KE and want a quick-swap hotend upgrade.
Choose the K2 Plus Nozzle Kit if
- You want spare nozzles in three sizes: 0.4, 0.6 and 0.8 mm, 4 pieces in the box.
- You own a K2 Plus, K2, K2 Pro or Hi Combo and want a quick-swap set.
- You value the three listed materials over a stated speed figure.
For more printer options, see best beginners 3D printer.
The Ender kit supports 300°C, and a hotend that hot burns on contact. Let it cool before a nozzle swap, keep fingers clear of the hotend, and ventilate the room while printing.
Project Match
- PLA and Hyper PLA: the Ender kit names both; the K2 kit fits most high and low temperature filaments without naming any.
- PLA-CF, PA-CF and PET-CF: the Ender kit names them with a hardened steel nozzle; the K2 kit lists hardened steel nozzles in 0.4, 0.6 and 0.8 mm but names no filament.
- TPU: the Ender kit names it; the K2 kit does not name a filament.
- PC and PP: the Ender kit names them and supports 300°C; the K2 kit states no temperature.
- Swapping nozzle sizes: the K2 kit includes 0.4, 0.6 and 0.8 mm nozzles; the Ender kit states no nozzle size.
FAQ: lasers and CNC
Is the Creality K2 Plus better than the Ender 3 V3?
The listings here cannot answer that: both are upgrade kits, not the printers. On the kits alone, the Ender hotend kit states more performance figures, with 300°C, 600 mm/s and flow up to 32 mm³/s, while the K2 kit offers 4 nozzles in 3 sizes.
What nozzle sizes come with the K2 Plus kit?
The kit includes 4 nozzles: 0.4 mm x2, 0.6 mm x1 and 0.8 mm x1. The listing says the set fits the Creality K2 Plus, K2, K2 Pro and Hi Combo.
How fast can the Ender 3 V3 hotend kit print?
The listing rates it at 600 mm/s with flow up to 32 mm³/s, and says it heats to 200°C in 40 seconds. The K2 kit states no speed or flow figure.
What filaments do these kits support?
The Ender kit names Hyper PLA, PLA, ABS, PTEG, TPU, PP, PC, PLA-CF, PA-CF and PET-CF. The K2 kit names none, saying only that it is compatible with most high and low temperature printing filaments.
Do either of these listings include the printer?
No. The K2 Plus listing is a 4-piece nozzle replacement kit, and the Ender 3 V3 listing is an upgrade hotend kit for the Ender 3 V3 SE and KE.
Related: Elegoo Centauri Carbon vs Ender 3 V3, PLA filament for 3D printers and FDM vs resin 3D printer.




