Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Anycubic Kobra S1 vs Creality K2 Se: Which One Should You Buy?

A cool plate for the Anycubic Kobra S1 faces an enclosure for the Creality K2 SE, compared on adhesion, temperature, noise and fit.

Anycubic Kobra S1 vs Creality K2 Se: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality Official K1 SE/ K2 SE EnclosureCreality Official K1 SE/ K2 SE Enclosure9.5/10View on Amazon
  2. 22.0 Upgraded OMG Cool Plate for Anycubic Kobra2.0 Upgraded OMG Cool Plate for Anycubic Kobra9.4/10View on Amazon

A new printer earns its keep when the opening layer sticks, the room stays quiet enough to work in, and the machine keeps curious hands and dust away from the print. This comparison looks at anycubic kobra s1 vs creality k2 se through the two accessories their listings put forward, a cool plate for the Kobra S1 and an enclosure for the K2 SE, and weighs adhesion, temperature, noise, dust and fit using what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: the Creality enclosure for the K2 SE is the stronger accessory, with what the listing describes as a constant-temperature space, noise reduction, dust isolation and protection from accidental contact. The SAHVAIM cool plate for the Kobra S1 is the focused pick for adhesion and fast release on PLA and PETG. Pick the enclosure when the print environment needs steadying, and the plate when the bed needs more grip.

Machines on the list

Creality Official K1 SE/ K2 SE Enclosure

Creality Official K1 SE/ K2 SE Enclosure

Creality9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black transparent PC enclosure for the Creality K1 SE and K2 SE that holds a constant temperature, cuts noise and keeps dust and accidental contact away from the printer.

Pros

  • Constant-temperature enclosed space helps adhesion in cold and humid rooms
  • Noise reduction for quieter printing in a shared room
  • Dust isolation keeps the print area clean
  • Guards against accidental contact by children and pets

Cons

  • Made for the K1 SE and K2 SE only; no other printer fit is stated
  • No dimensions are stated in the listing
  • No warranty term is stated
  • Install detail is thin: the listing claims easy install but lists no steps
2.0 Upgraded OMG Cool Plate for Anycubic Kobra

2.0 Upgraded OMG Cool Plate for Anycubic Kobra

SAHVAIM9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 264x276mm magnetic cool plate for the Anycubic Kobra S1, Kobra X and Kobra 4 with a Supertack smooth surface for PLA and PETG and quick, scraper-free release.

Pros

  • Supertack smooth surface holds PLA at 30–35°C and PETG at 55–65°C with no glue
  • Spring steel core with dual adhesive coatings resists deformation and keeps the surface flat
  • 0.8 mm thickened plate for magnetic stability and durability, preventing edge warping
  • Models release within 1 second with no scraper

Cons

  • Made for the Kobra S1, Kobra X and Kobra 4 only; no other printer fit is stated
  • PLA and PETG only; no other filament is listed
  • No warranty term is stated
  • A single plate in the box; no spare is included

Other machines to compare

Side by side

Spec SAHVAIM Cool Plate Creality K2 SE Enclosure Notes
HQ Score 56 65 Raw totals from the product cards
Role Cool plate for the Kobra S1 Enclosure for the K2 SE Different jobs: bed against environment
Size 264x276mm Not stated in the listing The plate size is stated; the enclosure size is not
Materials Spring steel core, dual high-performance adhesive coatings Upgraded PC shell PLA and PETG are the plate’s stated filaments
Print temperature PLA 30–35°C, PETG 55–65°C No temperature stated; listing describes a constant-temperature space Plate bed temps are stated; the enclosure states no temperature value
Noise Not stated in the listing Noise reduction stated Only the enclosure claims quieter printing
Dust Not stated in the listing Dust isolation stated Only the enclosure claims dust protection
Child and pet protection Not stated in the listing Guards against accidental contact Only the enclosure states this
Warranty Not stated in the listing Not stated in the listing Neither listing states a warranty term

Specs are what each manufacturer publishes as its rating on the listing, collected 6 November 2026.

Anycubic Kobra S1 vs Creality K2 Se: what separates the two sides

These two listings are accessories, not the printers themselves, and they solve different problems. The SAHVAIM cool plate works on the bed: a 264x276mm magnetic plate with a Supertack smooth surface, made for the Kobra S1, Kobra X and Kobra 4, that holds PLA and PETG with no glue and releases models within 1 second. The Creality enclosure works on the room around the printer: a black transparent shell for the K1 SE and K2 SE that the listing says holds a constant temperature, cuts noise and keeps dust out. Neither listing states a warranty term.

Adhesion and the first layer

Adhesion is the plate’s whole job. Its Supertack smooth surface holds PLA at 30–35°C and PETG at 55–65°C with no glue, and the spring steel core with dual high-performance adhesive coatings keeps the surface flat, and the thickened 0.8 mm design prevents edge warping. The enclosure helps adhesion from the other side: its enclosed design holds a constant temperature space, which the listing says improves adhesion in cold and humid rooms. If prints lift in a cold room, the enclosure addresses the room temperature the listing names; if they lift at the first layer, the plate addresses the bed surface. See the best PLA filament for 3D printers for filament options.

Temperature and the print environment

The enclosure owns this section. Its enclosed design creates what the listing describes as a constant temperature space for the K1 SE and K2 SE, which the listing says matters most in cold and humid rooms. The plate states temperatures too, but only for the bed surface: PLA at 30–35°C and PETG at 55–65°C. The enclosure addresses the air around the print, while the plate lists the bed temperatures for each filament. For the wider question of open against enclosed machines, see the enclosed vs open 3D printer guide.

Noise and dust

Only the enclosure claims anything here. The listing says its cover can significantly reduce the noise the printer makes while it runs, and its enclosed design isolates dust, keeping the print area clean. The plate listing says nothing about noise or dust, which is fair: a build plate has no moving parts to quiet and no cover to keep dust out. If the printer shares a room with work or sleep, the enclosure is the one that answers. See the best quiet 3D printer for home guide.

Materials

The plate is built from a high-elastic spring steel core with dual high-performance adhesive coatings, and it prints PLA and PETG, with bed temperatures stated for each. The enclosure shell is upgraded PC, in black semi transparent form. Neither listing mentions other filaments, so treat anything beyond PLA and PETG on the plate as unstated, and check the filament maker’s guidance before printing a new material on either setup.

Fit and compatibility

Fit is where both listings are exact. The plate is 264x276mm and made for the Anycubic Kobra S1, Kobra X and Kobra 4, with a magnetic hold and a thickness of 0.8 mm. The enclosure is made for the Creality K1 SE and K2 SE, with a fit the listing describes as customized for those two models, in a black transparent PC shell. Neither listing gives a fit for any other printer, so check the maker’s own specifications if your model is not named.

Safety and enclosure

The enclosure carries the safety story. Its shell guards against accidental contact with the printer by children and pets, and it keeps dust from entering the print area. The plate is a hotbed accessory: it cools quickly and releases models within 1 second with no scraper, so removal is brief, but the listing states no safety certification.

Support and warranty

Neither listing states a warranty term, so neither earns warranty points here. The plate listing gives a part number, OMG-264×276-Y-NEW, and the enclosure listing gives part number 3D-K1SE-Enclosure. Support beyond that is unstated in both listings, so check the maker’s own channels before you buy.

Choose the SAHVAIM Cool Plate if

  • You print PLA and PETG on a Kobra S1, Kobra X or Kobra 4 and want a stickier bed.
  • You want models to release within 1 second with no scraper.
  • You want a thicker 0.8 mm plate that prevents edge warping, with a spring steel core that keeps the surface flat.

Choose the Creality K2 SE Enclosure if

  • You print in a cold or humid room and want the constant-temperature space the listing describes around the printer.
  • You want quieter printing and a print area kept free of dust.
  • Children or pets share the room and you want a barrier against accidental contact.

For more enclosure options, see the best 3D printer enclosure for Ender 3.

Safety

A printer bed runs hot and a running printer has moving parts. Keep the enclosure closed while it prints, keep children and pets away from the machine, and give the room fresh air while printing.

Project Match

  • PLA and PETG parts on the 264x276mm plate: the SAHVAIM cool plate, with its Supertack surface and quick release.
  • Prints in a cold or humid room: the Creality enclosure, which the listing says holds a constant temperature around the printer.
  • A shared room where noise matters: the enclosure, which the listing says reduces printing noise.
  • A home with children or pets near the printer: the enclosure, which guards against accidental contact.
  • A plate swap for a Kobra S1, Kobra X or Kobra 4: the cool plate, made to fit those models.

FAQ: lasers and CNC

Which is better, the Anycubic Kobra S1 or the Creality K2 SE?

The listings here are accessories, not the printers themselves, so this comparison weighs what each accessory adds. The enclosure steadies temperature, noise and dust around the K2 SE, while the cool plate improves adhesion and release on the Kobra S1. Pick by which problem your setup has.

Does the Kobra S1 cool plate work with PETG?

Yes. The listing states the plate holds PLA at 30–35°C and PETG at 55–65°C with no glue.

Does the K2 SE enclosure fit the K1 SE too?

Yes. The listing states the enclosure is made for the Creality K1 SE and K2 SE.

Do I need an enclosure for the K2 SE?

It depends on your room. The listing states the enclosure holds a constant temperature, reduces noise and isolates dust, which helps most in cold and humid rooms and shared spaces. In a warm, quiet, dedicated room the gain is smaller.

How do I remove prints from the cool plate?

The listing states models release within 1 second with no scraper, using the plate’s smart peeling design and quick cooling.

Related: enclosed vs open 3D printer, Creality K2 Plus vs Ender 3 V3, best 3D printer for small business and best PLA filament for 3D printers.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.