Best Nozzle for Bambu Lab P1S (2026): 4 Picks Compared
Hotend kits for the Bambu Lab P1S compared on nozzle size, temperature, speed and filament range, so you can pick the kit that fits your printing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHzdaDeve 3PK Hotend9.5/10View on Amazon - 2
Best Size RangeHysiPrui 4PK Hotend9.5/10View on Amazon - 3
Best Complete KitXMammal 0.4mm Hotend9.4/10View on Amazon - 4
Best for X1 and P1COMTREE 0.4mm Hotend9.3/10View on Amazon
A Bambu Lab P1S owner who swaps nozzles is usually chasing finer detail on small models, faster prints on large ones, or a nozzle that survives abrasive filament without wearing out. The best nozzle for bambu lab p1s depends on which of those jobs matters most, because the listings here cover different sizes, temperatures and speeds. This guide compares the hotend kits for the P1S and P1P, using what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall HzdaDeve 3PK Hotend: 350°C max and 500 mm/s, with 0.2, 0.4 and 0.6 mm sizes Check price on Amazon
- Best Size Range HysiPrui 4PK Hotend: Four hotend sizes for the P1S and P1P Check price on Amazon
- Best Complete Kit XMammal 0.4mm Hotend: Full assembly with ceramic heater, cooling fan and heat block Check price on Amazon
- Best for X1 and P1 COMTREE 0.4mm Hotend: Fits X1 and P1 series printers, with a silicone sock and thermal grease Check price on Amazon
Machines on the list

Upgraded 3PK 0.2/0.4/0.6mm P1S Hotend for Bambu
A hotend kit in 0.2, 0.4 and 0.6 mm for the P1S and P1P, with hardened steel nozzles, a 350°C max temperature and a stated speed of up to 500 mm/s.
Pros
- Sizes 0.2, 0.4 and 0.6 mm in the kit.
- 350°C max temperature, the highest stated here.
- Stated speed up to 500 mm/s with fast, even heating.
- Hardened steel nozzles built for carbon fiber and glass fiber-reinforced materials.
Cons
- The hardened nozzle is fixed and is not designed to be removable from the assembly, as the listing states.
- No warranty term is stated on the listing.
- No cooling fan is listed in the kit contents.
- No weight is stated on the listing.

4PK P1S/P1P Hotend Kit 0.2/0.4/0.6/0.8MM Upgraded
A four-size hotend kit for the P1S and P1P, with hardened steel nozzles and a 300°C max temperature.
Pros
- Four hotend sizes in the kit, the widest range here.
- 300°C max temperature with stable extrusion, as the listing states.
- Integrated leak-proof design, assembled for quick swap.
- Supports PLA, PETG, TPU and ABS, as the listing states.
Cons
- No warranty term is stated on the listing.
- No speed figure is stated on the listing.
- No cooling fan is listed in the kit contents.
- No weight is stated on the listing.

Bambu Lab P1P/P1S Hotend Complete Kit
A complete 0.4 mm hotend assembly for the P1P and P1S, with a hardened steel nozzle, ceramic heater, cooling fan and heating block.
Pros
- Complete assembly: hardened steel nozzle, ceramic heater, cooling fan and heating block.
- 300°C max temperature for PLA, PETG, ABS and specialty materials, as the listing states.
- Copper-alloy heatbreak to prevent oozing, as the listing states.
- Swap in 90 seconds with factory thermal settings kept, as the listing states.
Cons
- Only the 0.4 mm size: no other sizes in the kit.
- No warranty term is stated on the listing.
- No weight is stated on the listing.
- The 0.4 mm nozzle is the factory standard size, so finer detail needs another size.

COMTREE Bamboo Original 0.4mm Hardened Steel
A 0.4 mm hardened steel nozzle assembly for the Bambu Lab X1 series and P1 series, with a silicone sock, thermal grease, screws and a fixing clip.
Pros
- Fits the X1 series and P1 series, including P1S, P1P, X1C and X1 Carbon, as the listing states.
- 300°C max printing temperature, as the listing states.
- Includes a silicone sock, thermal grease, M3-14 step screws and a fixing clip.
- The listing states Bambu PLA-CF and PETG-CF have a low risk of clogging with the hardened steel 0.4 mm nozzle.
Cons
- Only the 0.4 mm size: no other sizes in the kit.
- No warranty term is stated on the listing.
- The listing writes Bamboo in the title and bullets, so read the compatibility line before ordering.
- No weight is stated on the listing.
Other machines to compare
Upgraded 0.2MM P1S/P1P Hotend Full AssemblyCheck price on Amazon
Genuine Bambu Lab Hotend with Nozzle for P1S P1P X1C X1Check price on Amazon
Specs compared
| Nozzle kit | HQ Score | Sizes | Max temp | Speed stated | In the box |
|---|---|---|---|---|---|
| HzdaDeve 3PK Hotend | 9.5/10 | 0.2, 0.4, 0.6 mm | 350°C | Up to 500 mm/s | Thermistor, ceramic heater, silicone cover |
| HysiPrui 4PK Hotend | 9.5/10 | Four sizes | 300°C | Not stated | Thermistor, heater cartridge, heat block |
| XMammal 0.4mm Hotend | 9.4/10 | 0.4 mm | 300°C | Not stated | Ceramic heater, cooling fan, heat block |
| COMTREE 0.4mm Hotend | 9.3/10 | 0.4 mm | 300°C | Not stated | Silicone sock, thermal grease, screws, clip |
These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).
Nozzle size: what each size is for
Size is the first choice, and the HysiPrui listing spells out the trade-off: the 0.2 mm nozzle is ideal for small and intricate models, the 0.4 mm nozzle is ideal for everyday use, balancing speed and quality, and the larger nozzles print faster and suit large models. The HzdaDeve kit covers 0.2, 0.4 and 0.6 mm, so it covers the same range except the largest size.
The 0.4 mm size is the middle of the range, and it is the only size in the XMammal and COMTREE kits. A maker who prints everyday models in PLA or PETG can stay with 0.4 mm, while a maker who prints small detailed models or large fast prints needs the multi-size kits. For size comparisons, see our 0.2 vs 0.4 mm nozzle comparison and our wider nozzle comparison.
Buying guide: the best nozzle for bambu lab p1s
Match the size to the model
Start from the model. Small and intricate models suit the 0.2 mm nozzle, everyday models suit the 0.4 mm nozzle, and large models suit the larger nozzles, which print faster. The HysiPrui kit holds four hotend sizes, while the HzdaDeve kit holds 0.2, 0.4 and 0.6 mm.
Check the temperature
Temperature decides which filaments a hotend can run. The HzdaDeve listing states a max of 350°C, while the HysiPrui, XMammal and COMTREE listings state 300°C. The HzdaDeve listing also states ASA among its filaments, while the HysiPrui listing states PLA, PETG, TPU and ABS. A higher stated max leaves more room for hotter filaments, but the listing has to state it first.
Check the fit before ordering
The HysiPrui, XMammal and HzdaDeve kits list the P1S and P1P, and the COMTREE kit lists the X1 series and P1 series as well. The HysiPrui listing asks the buyer to verify the printer model before ordering, so check the model on the printer before you buy. For hotend types, see our PTFE vs all metal hotend guide.
Swap time and cooling
These kits sell as complete hotend assemblies, not as loose nozzles. The XMammal listing states a swap in 90 seconds that keeps the factory thermal settings. The HysiPrui listing warns to let the old hot end cool down before replacing it, to prevent burns. The HzdaDeve listing states the hardened nozzle is fixed and is not designed to be removable from the assembly, so the whole assembly swaps as one unit.
Let a hotend cool before a swap, and keep fingers clear of the nozzle while the printer runs. The HysiPrui listing warns to let the old hot end cool down to prevent burns.
Project Match
- Fine detail on small models: the 0.2 mm size in the HzdaDeve or HysiPrui kit.
- Everyday printing: the 0.4 mm size, ideal for everyday use, balancing speed and quality.
- Large models, faster: the larger sizes, ideal for printing large models.
- Abrasive filaments: hardened steel nozzles, with carbon fiber and glass fiber stated on the HzdaDeve listing.
How the scores add up
Each kit is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. How we pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HzdaDeve 3PK Hotend | 9.5 | 32 | 21 | 21 | 0 | 0 |
| HysiPrui 4PK Hotend | 9.5 | 30 | 20 | 22 | 0 | 0 |
| XMammal 0.4mm Hotend | 9.4 | 28 | 20 | 19 | 0 | 0 |
| COMTREE 0.4mm Hotend | 9.3 | 27 | 19 | 18 | 0 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
What nozzle size should I use for everyday printing on the P1S?
The 0.4 mm size. The HysiPrui listing states the 0.4 mm nozzle is ideal for everyday use, balancing speed and quality.
Can I print carbon fiber filament with these nozzles?
The HzdaDeve listing states its hardened steel nozzles handle carbon fiber and glass fiber-reinforced materials. The COMTREE listing states Bambu PLA-CF and PETG-CF have a low risk of clogging with its hardened steel 0.4 mm nozzle.
Do these kits fit the P1P as well as the P1S?
The HysiPrui, XMammal and HzdaDeve kits list the P1S and P1P. The COMTREE kit lists the P1S, P1P, X1C and X1 Carbon.
What is the highest temperature stated?
350°C, on the HzdaDeve kit. The HysiPrui, XMammal and COMTREE kits state 300°C.
Can I swap just the nozzle, or the whole hotend?
These listings sell complete hotend assemblies. The HzdaDeve listing states the hardened nozzle is fixed and is not designed to be removable from the assembly.
Related: 0.4 vs 0.6 mm nozzle, Bambu Lab PLA vs Elegoo PLA Plus, best PETG filament for durable prints and the 3D printer hub.




