Petg vs Pc Filament: Which One Should You Buy?
Two engineering filaments compared on speed, tolerance, heat resistance and printer setup, using what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OVERTURE 4KG Bundle High Speed PETG Filament9.7/10View on Amazon - 2
OVERTURE High Speed PETG Filament 1.75mm9.7/10View on Amazon - 3
ELEGOO PC Filament 1.75mm Black 1KG9.6/10View on Amazon - 4
ELEGOO PC Filament 1.75mm Transparent 1KG9.5/10View on Amazon
A functional part that must hold its shape under load starts with the filament. Makers who print brackets, housings and jigs reach for engineering filaments when the part must hold up under load. This comparison looks at petg vs pc filament through PETG spools from OVERTURE and PC spools from ELEGOO, covering speed, tolerance, heat resistance and printer setup using what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: PETG is the easier path for fast printing with tight tolerance and clear settings. PC filament suits makers with an enclosed printer who need heat resistance and impact strength.
Machines on the list

OVERTURE 4KG Bundle High Speed PETG Filament
A 4kg bundle of high-speed PETG in black and white, rated up to 300mm/s with a +/- 0.02mm tolerance.
Pros
- Rated up to 300mm/s for high-speed printers such as Bambu Lab and Creality K1
- 4 spools of 1kg in black and white for batch production and print farms
- +/- 0.02mm tolerance for mechanical assemblies that must fit
- Neat winding for tangle-free feeding in AMS systems
Cons
- Black and white are the only colors in the bundle
- No heat-resistance figure is stated in the listing
- No drying guidance is stated for spools once opened
- 4 spools need more shelf space

OVERTURE High Speed PETG Filament 1.75mm
A 1kg spool of white high-speed PETG, rated up to 300mm/s with a +/- 0.02mm tolerance.
Pros
- Rated up to 300mm/s with flow consistency for rapid printing
- +/- 0.02mm tolerance for parts that must fit together
- Neat winding and AMS-friendly feeding
- Good bed adhesion with easy removal once cooled
Cons
- White is the only color in this spool
- No heat-resistance figure is stated in the listing
- No drying guidance is stated for the spool once opened
- The speed range of 30-300mm/s leaves setup to the maker

ELEGOO PC Filament 1.75mm Black 1KG
A 1KG spool of black polycarbonate filament with a +/- 0.05mm tolerance, for heat-resistant parts in an enclosed printer.
Pros
- High impact resistance for functional parts
- Heat resistance for parts such as automotive parts and electrical components
- Low warping for large models and high-precision parts
- Vacuum-sealed bag keeps the spool dry
Cons
- An enclosed printer is required for better results
- Dry before use at 80 ± 5 °C for 8 hours in a blast oven
- +/- 0.05mm tolerance is looser than the PETG listings at +/- 0.02mm
- No warranty term is stated in the listing

ELEGOO PC Filament 1.75mm Transparent 1KG
A 1KG spool of clear polycarbonate filament with a +/- 0.05mm tolerance, for light-transmitting parts in an enclosed printer.
Pros
- Clear filament for light-transmitting parts
- High impact resistance for functional parts
- Heat resistance for parts that need high-temperature stability
- Vacuum-sealed bag keeps the spool dry
Cons
- An enclosed printer is required for better results
- Dry before use at 80 ± 5 °C for 8 hours in a blast oven
- +/- 0.05mm tolerance is looser than the PETG listings at +/- 0.02mm
- No warranty term is stated in the listing
Other machines to compare
SUNLU High Speed PETG Filament 1.75mm 4KGCheck price on Amazon
SUNLU PETG Filament 1.75mmCheck price on Amazon
Creality PETG Filament 1.75mmCheck price on Amazon
SUNLU PC FilamentCheck price on Amazon
SUNLU PC-ABS 3D Printing Filament 1.75mm 1KG BlackCheck price on Amazon
SUNLU PC-ABS 3D Printing Filament 1.75mm 1KG WhiteCheck price on Amazon
Side by side
| Spec | OVERTURE PETG 4-Pack | OVERTURE PETG White | ELEGOO PC Black 1KG | ELEGOO PC Clear 1KG |
|---|---|---|---|---|
| HQ Score | 68 | 67 | 56 | 55 |
| Filament | PETG | PETG | PC | PC |
| Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Tolerance | +/- 0.02mm | +/- 0.02mm | +/- 0.05mm | +/- 0.05mm |
| Spool | 4kg (4-pack) | 1kg (1-pack) | 1KG | 1KG |
| Rated speed | Up to 300mm/s | Up to 300mm/s | Not stated | Not stated |
| Nozzle temp | 230-260°C | 230-260°C | Not stated | Not stated |
| Bed temp | 65-70°C | 65-70°C | Not stated | Not stated |
| Enclosed printer | Not stated | Not stated | Required | Required |
| Drying | Vacuum-sealed, pre-dried | Vacuum-sealed, pre-dried | 80 ± 5 °C for 8 hours | 80 ± 5 °C for 8 hours |
| Warranty | 1-year Warranty | 1-year Warranty | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 5 November 2026.
petg vs pc filament: speed and print settings
The PETG listings rate speed up to 300mm/s on high-speed printers such as Bambu Lab, Creality K1 and Voron, with a stated range of 30-300mm/s. The same listings give a nozzle range of 230-260°C and a bed range of 65-70°C, so the main print settings are stated. The PC listings state no speed, nozzle or bed figures, which leaves print settings to the maker. For more PETG options, see best PETG filament for durable prints.
Tolerance and fit
Tolerance is where the PETG side leads on paper. Both OVERTURE listings state a dimensional accuracy of +/- 0.02mm, aimed at mechanical assemblies that must fit. Both ELEGOO listings state +/- 0.05mm, which suits functional parts per the listing, but leaves a looser fit. Diameter is the same across all listings at 1.75mm, so the difference sits in tolerance alone.
Heat, strength and warping
The PC listings claim heat resistance and impact strength. ELEGOO describes high impact resistance to withstand stretching and compression, plus heat resistance for automotive and electrical parts. Low warping suits large models, and a low creep rate keeps dimensions stable. The PETG listings claim toughness and layer bonding at rapid speeds, with bed adhesion and easy removal once parts cool, but state no heat-resistance figure. For a wider PC comparison, see PC vs ABS filament.
Printer setup: enclosure and drying
Setup is the clearest split between the sides. The PC listings require an enclosed printer for better results and call for drying before use at 80 ± 5 °C for 8 hours in a blast oven. The filament ships in a vacuum-sealed aluminum foil bag. The PETG listings state no enclosed-printer requirement and describe each spool as vacuum-sealed and pre-dried. For enclosure options, see best large 3D printer enclosure with ventilation.
Choose PETG if
- You want rated speeds up to 300mm/s and stated settings.
- You print mechanical assemblies that must fit.
- You run batch work and want a 4-pack in black and white.
- You want a stated 1-year Warranty.
Choose PC filament if
- You need heat resistance for automotive and electrical parts.
- You print large models and want low warping.
- You need clear filament for light-transmitting parts.
- You already own an enclosed printer and a drying setup.
PC filament needs an enclosed printer and drying before use, per the listing. Never laser polycarbonate filament or printed PC parts: polycarbonate is not a laser material, and lasering it releases fumes. Keep the workspace ventilated while printing.
Project Match
- Mechanical assemblies: OVERTURE PETG White or the OVERTURE PETG 4-Pack, with a +/- 0.02mm tolerance.
- Batch production: OVERTURE PETG 4-Pack, with 4 spools of 1kg in black and white.
- Heat-resistant parts such as automotive and electrical parts: ELEGOO PC Black 1KG.
- Light-transmitting parts: ELEGOO PC Clear 1KG.
- Large models: either ELEGOO PC spool, in an enclosed printer.
FAQ: lasers and CNC
Is PETG or PC filament stronger for functional parts?
Both sides claim strength: ELEGOO PC filament claims high impact resistance, OVERTURE PETG claims toughness with layer bonding. PC adds stated heat resistance; PETG adds a tighter +/- 0.02mm tolerance.
Can I print PC filament on an open printer?
The ELEGOO listings say an enclosed printer is required for better results, so use an enclosed printer for PC filament.
What temperatures do PETG and PC filament need?
PETG lists a nozzle range of 230-260°C and a bed range of 65-70°C. PC lists no nozzle or bed figures, and calls for drying before use at 80 ± 5 °C for 8 hours.
Does PETG or PC filament need drying?
The OVERTURE PETG spools ship vacuum-sealed and pre-dried, with no drying step stated. The ELEGOO PC listings call for drying before use at 80 ± 5 °C for 8 hours.
Which filament is better for a beginner?
PETG is the simpler start: stated print settings and AMS-friendly winding, with no enclosed-printer requirement. PC filament needs an enclosed printer and a drying setup.
Related: PC vs ABS filament, PETG vs PCTG filament, polycarbonate vs nylon filament and best filament dry box.




