Laser Cutting Machine Parts: Main Components Explained
Laser cutting machine parts explained: the focus lens, mirrors and bed of a CO2 machine, and the lenses that fit them, with the diameters and focal lengths the listings state.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CNCOLETECH CO2 Laser Lens Dia:25mm FL:3" or 76.2mm9.5/10View on Amazon - 2
Cloudray CO2 Laser Lens 18mm Laser Mirror CO29.5/10View on Amazon - 3
CNCOLETECH 25mm CO2 Laser Lens9.4/10View on Amazon - 4
TEN-HIGH 18mm CO2 Laser Lens 4"9.4/10View on Amazon
The sign blanks are stacked by the door, the leather patches are cut, and the machine stops cutting clean lines halfway through a sheet. Laser cutting machine parts are the pieces that make the beam do its work: the lens that focuses it, the mirrors that steer it, and the bed that holds the material. This guide names the parts, shows how to match a focus lens to a machine, and lists the lenses in this guide.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

CNCOLETECH CO2 Laser Lens Dia:25mm FL:3" or 76.2mm
A CVD ZnSe focus lens, 25mm diameter with a 76.2mm focal length, for CO2 machines from 40W to 500W, suited to a maker who wants the highest stated transmittance.
Pros
- Transmittance of at least 99.8%, the highest stated here
- Compatible power of 40W to 500W, the widest range here
- CVD ZnSe material from US II-VI
- Double-sided solid coating, wiping resistant
Cons
- No warranty term is stated
- No lens weight is stated
- No spot size figure is stated
- CO2 machines only, not for diode or fiber machines

Cloudray CO2 Laser Lens 18mm Laser Mirror CO2
A PVD ZnSe meniscus lens, 18mm diameter with a 76.2mm focal length, for CO2 machines from 30W to 100W, suited to a maker who wants a warranty stated.
Pros
- 4 month warranty stated, the only warranty here
- Meniscus shape with double-sided solid coating
- Transmittance of at least 99.5% for 30W to 100W machines
- Focal length of 76.2mm, a common 3-inch focal length
Cons
- Title calls it a laser mirror as well as a lens
- Power range tops out at 100W, below the 500W CNCOLETECH
- No spot size figure is stated

CNCOLETECH 25mm CO2 Laser Lens
A PVD ZnSe focus lens, 25mm diameter with a 63.5mm focal length, for CO2 machines from 30W to 150W, suited to a maker who wants a short focal length.
Pros
- Short focal length at 63.5mm for a smaller spot
- Transmittance of at least 99.5% for 30W to 150W machines
- Wavelength of 10600nm stated
- Double-sided solid coating, wiping resistant
Cons
- No warranty term is stated
- No spot size figure is stated
- Power range tops out at 150W, below the 500W CNCOLETECH
- CO2 machines only, not for diode or fiber machines

TEN-HIGH 18mm CO2 Laser Lens 4"
A PVD ZnSe plano-convex lens, 18mm diameter with a 101.6mm focal length, for CO2 machines from 30W to 100W, suited to a maker who wants a long focal length.
Pros
- Longest focal length here at 101.6mm
- Transmittance of at least 99.5% for 30W to 100W machines
- Plano-convex shape with double-sided solid coating
- High temperature resistance stated
Cons
- No warranty term is stated
- Power range tops out at 100W, below the 500W CNCOLETECH
- CO2 machines only, not for diode or fiber machines
The quick answer
The focus lens is the part to match first. Check the diameter against the lens holder, the focal length against the job, and the power range against the machine. The lenses here run from 18mm to 25mm in diameter, with focal lengths of 63.5mm, 76.2mm and 101.6mm, and power ranges from 30W to 500W. The CNCOLETECH CVD lens lists the highest transmittance, at least 99.8%, and the Cloudray lens (on Amazon) lists a 4 month warranty. Match the lens to the machine manual before you buy.
Step 1: Know the parts of a CO2 laser cutter
A CO2 laser cutter has a tube that makes the beam, mirrors that steer it to the head, a focus lens that narrows it to a point, and a bed that holds the material. The lens sits in a holder in the head, and its diameter must fit that holder. The focal length sets how far below the lens the beam comes to a point, and it affects the spot size on the material. The listings here cover the focus lens only, so check the machine manual for the tube, mirrors and bed. See the how to choose a laser engraver guide for the machine side.
Step 2: Match the lens to the machine
Match the diameter, the focal length and the power range to the machine. The table below lists what each lens states.
| Lens | Diameter | Focal length | Power | Transmittance |
|---|---|---|---|---|
| Cloudray 18mm | 18mm | 76.2mm | 30W-100W | ≥99.5% |
| CNCOLETECH CVD 25mm | 25mm | 76.2mm | 40W-500W | ≥99.8% |
| CNCOLETECH PVD 25mm | 25mm | 63.5mm | 30W-150W | ≥99.5% |
| TEN-HIGH 18mm | 18mm | 101.6mm | 30W-100W | ≥99.5% |
A lens with a diameter larger than the holder will not fit, so check the diameter against the holder first. The CNCOLETECH CVD lens (on Amazon) lists the widest power range at 40W to 500W, and the TEN-HIGH lens (on Amazon) lists the longest focal length at 101.6mm. Check the machine manual for the diameter and focal length it takes. See the F theta lens vs CO2 lens guide for the lens types.
Step 3: Check the lens before you fit it
Read the coating, the shape and the transmittance on the listing. Each lens here lists a double-sided solid coating, and each lists a transmittance of 99.5% or higher. The Cloudray lens is a meniscus shape, and the TEN-HIGH lens is a plano-convex shape. The CNCOLETECH PVD lens lists a wavelength of 10600nm, so check that the wavelength matches the machine. Handle the lens by the edge, and keep the coating clear of dust and fingerprints.
Laser cutting machine parts: the focus lenses
The focus lens is the part from Step 1 that focuses the beam for the cut, and the lenses below cover the diameters, focal lengths and power ranges in Step 2.
Work safely around the laser
- Ventilation: exhaust fumes outdoors or use a filter made for laser fumes, and never leave a running job unattended.
- Materials: never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.
- Eye protection: use eyewear only if its listing states an optical density and a wavelength range that matches your laser.
FAQ: lasers and CNC
What does a focus lens do in a laser cutter?
It narrows the beam to a point on the material. The focal length sets how far below the lens that point sits, and the diameter must fit the holder in the head.
What focal length should I pick?
Match it to the job and the machine manual. The lenses here list 63.5mm, 76.2mm and 101.6mm.
Do these lenses fit any CO2 machine?
No. Check the diameter against the holder, the focal length against the job, and the power range against the machine. The CNCOLETECH CVD lens lists 40W to 500W, while the Cloudray and TEN-HIGH lenses list 30W to 100W.
How do I know when a lens needs replacing?
Check the coating for marks and the cuts for a wider kerf. A lens with a damaged coating cuts poorly, so keep a spare that matches the diameter and focal length.
Related: the laser engraver hub, laser accessories and CO2 laser engraver for beginners. Also see laser engraver types.




