Fiber Laser Cutting Machine Price Guide
A fiber laser cutting machine price depends on laser power, bed size and how many jobs one machine covers, from a cutting bed to a 1200W 4-in-1 system.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Xlaserlab X1pro 700W Laser Welding Machine9.6/10View on Amazon - 2
xTool MetalFab 1200W 4-in-1 Laser Welding Machine9.6/10View on Amazon - 3
Laser Cutting Bed for xTool F1 Ultra & F2 Ultra9.4/10View on Amazon
Fiber laser cutting machine price comes down to laser power, bed size, and how many jobs a single machine covers. The three products in this guide show the range: a 700W welder-cutter, a 1200W 4-in-1 system and a cutting bed made for two xTool models.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
The listings in this guide state no prices, so this guide gives no dollar figures.

Xlaserlab X1pro 700W Laser Welding Machine
A 700W 6-in-1 fiber laser welder for welding, cutting, cleaning and rust removal.
Pros
- 6 functions: welding, cutting, cleaning, rust removal and underwater welding
- Welds aluminum, stainless steel, carbon steel, copper, chrome and nickel from 0.5 mm to 3 mm thick
- Built-in welding packages and three custom presets on a 7-inch touchscreen
- 4-8x faster than TIG/MIG with a minimal heat-affected zone, per the maker
Cons
- Welding is rated from 0.5 mm to 3 mm thick
- 1-year warranty covers the laser source only; no term is stated for the rest
- No cutting depth is stated in the listing

xTool MetalFab 1200W 4-in-1 Laser Welding Machine
A 1200W 4-in-1 fiber system that welds, CNC cuts, cleans and engraves, cutting 10 mm carbon steel at 400 mm/s.
Pros
- 1200W fiber laser cuts 10 mm carbon steel and 5 mm stainless steel
- 400 mm/s rated cutting speed with 108+ presets
- 4-in-1 system covers welding, CNC cutting, cleaning and engraving
- SaveGas optimization cuts gas consumption by up to 50%, per the maker
Cons
- No warranty term is stated in the listing
- Welding depth is 5 mm in stainless and carbon steel
- Cutting is rated to 10 mm carbon steel and 5 mm stainless steel
- No weight is stated in the listing

Laser Cutting Bed for xTool F1 Ultra & F2 Ultra
A 220 x 220 x 18 mm aluminum cutting bed with raised slats for the xTool F1 Ultra and F2 Ultra.
Pros
- Raised slats lift material off the baseplate
- Open airflow channels let smoke move beneath the workpiece
- Aluminum panel adds a layer between work and baseplate
- Drop-in setup on the original base
Cons
- Fits only the xTool F1 Ultra and F2 Ultra
- Laser machine and cutting materials are not included
- Results vary with material, focus and cutting settings
- Adds 18 mm of panel height
Fiber laser cutting machine price: what moves it
Laser power is the main driver. The xTool MetalFab runs a 1200W fiber laser rated to cut 10 mm carbon steel and 5 mm stainless steel, while the Xlaserlab X1 Pro runs a 700W fiber laser built for welding material from 0.5 mm to 3 mm thick.
Bed size is the next driver. The MetalFab bed measures 610 x 610 mm, against the 220 x 220 mm KAVORIX cutting bed (on Amazon) made for the xTool F1 Ultra and F2 Ultra. The bed is an accessory: it lifts material, but it cuts nothing on its own.
Functions add to the price as well. The MetalFab is a 4-in-1 system that welds, CNC cuts, cleans and engraves, with 108+ presets and one-click smart nesting rated at 98.7% material use. The X1 Pro is a 6-in-1 system that welds, cuts, cleans rust and supports CNC retrofit and underwater welding.
Speed and safety shape the running cost too. The MetalFab is rated at 400 mm/s with deviation under 0.1 mm, per the maker, and it is a Class 4 laser with a contact-activated safety system. The X1 Pro states SGS-certified weld quality with minimal fumes, zero arc flash and low noise.
The gear: what each machine handles
Which machine fits depends on the step that sets the price: cutting depth, bed size and the extra jobs the unit covers.
What to check before you buy
Match the machine to the material and the thickness the listing actually rates.
- Laser class: the MetalFab is a Class 4 laser with a contact-activated safety system. Plan ventilation that exhausts outdoors and keep a suitable extinguisher within reach. Never leave a running job unattended.
- Warranty: the X1 Pro states a 1-year laser source warranty and the KAVORIX bed states a 90-day warranty, while the MetalFab listing states no warranty term.
- Weight: the X1 Pro bullets state 19 kg (41.89 lbs) while the spec table lists 61.2 pounds. Trust the bullets.
Common mistakes to avoid
- Paying for power the work never needs: match the rated cut depth to the material on hand.
- Buying a model-specific bed for the wrong machine.
- Treating a maker figure as a warranty: the MetalFab is rated for 10,000+ hours, but the listing states no warranty term.
- Ordering on the spec table alone when the bullets disagree: the X1 Pro weight differs between bullets and spec table.
Fiber laser cutting machine price: the short version
- Price follows laser power, bed size and the number of functions.
- Match the rated cut depth to the material on hand.
- Compare the warranty term in writing: 90 days, 1-year laser source, or none stated.
- Check the laser class and plan ventilation and fire safety.
FAQ: lasers and CNC
What does a fiber laser cutting machine price depend on?
Laser power, bed size and the functions on offer. The 1200W 4-in-1 system is rated to cut 10 mm carbon steel, while the 700W 6-in-1 unit is rated to weld material from 0.5 mm to 3 mm thick.
Is a 1200W fiber laser enough for 10 mm carbon steel?
The MetalFab listing rates its 1200W fiber laser to cut 10 mm carbon steel and 5 mm stainless steel.
Do I need a cutting bed for a fiber laser?
A bed is not a cutter, but it helps the cutting step: the KAVORIX bed lifts material on raised slats, which the maker says reduces backside scorch marks.
Can one machine weld and cut?
Yes, where the listing states both jobs. The MetalFab is a 4-in-1 system that welds, CNC cuts, cleans and engraves, and the X1 Pro is a 6-in-1 system that also cuts.
Related: the diode vs fiber laser for small business, how much a laser cutter machine costs and laser wood cutter price comparison.




