Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Low Cost Laser Cutting Machine: A Beginner’s Guide

A low cost laser cutting machine is a diode laser engraver and cutter in the entry range: compare optical output, work area and safety features before you buy.

Low Cost Laser Cutting Machine: A Beginner’s Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Xlaserlab X1pro 700W Laser Welding MachineXlaserlab X1pro 700W Laser Welding Machine9.6/10View on Amazon
  2. 2xTool MetalFab 1200W 4-in-1 Laser Welding Machine CNC CutterxTool MetalFab 1200W 4-in-1 Laser Welding Machine CNC Cutter9.6/10View on Amazon
  3. 3Creality Falcon 10W Laser Engraver MachineCreality Falcon 10W Laser Engraver Machine9.6/10View on Amazon

A sign for the front door, a tumbler with a name on it, a leather patch for a jacket, or a stack of cut parts for a craft fair: that is the work a low cost laser cutting machine takes on. A low cost laser cutting machine is a diode laser engraver and cutter in the entry range, with optical output from 3.5W to 20W in the listings here, a work area from 135×145 mm to 400 x 400 mm, and speeds up to 24,000 mm/min. The sections below walk through what to look for and how to set one up safely.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives no prices, because the listings carry no price data. Compare optical output, work area and safety features, and build a shortlist from those figures.

Step 1: Start with what you want to make

Start with the project, not the machine. Good starting work is personalized wood gifts, engraved drinkware, leather goods, signs for local businesses, pet tags and awards. Pick the one where you already know the customer.

Ask this first: who will pay for this, and which material does it need? Wood and leather appear in nearly every listing here, and the ATOMSTACK Swift listings add slate. Glass and coated metal appear in several listings, while the ATOMSTACK Swift 5W listing states it cannot engrave on any type of metal. The listings that name acrylic say dark acrylic or black acrylic, not clear acrylic. Our engraving materials hub shows the material side of the choice.

Step 2: Read the optical output, not the big number

Optical output is the laser power that does the cutting, and it is the number to compare. The listings here run from 3.5W to 20W optical output: the ATOMSTACK Swift 3.5W at 3.5W, the Carverall K15 Pro (on Amazon) and ATOMSTACK Swift 7W at 7W, the AlgoLaser 10W (on Amazon) at 10W, the ACMER S2 (on Amazon) at 12W, the AlgoLaser MK3 at 15W and the Longer Ray5 (on Amazon) at 20W. If you are unsure, read how to choose a laser engraver first.

Do not mix optical output with input power. The ACMER S2 lists 12W optical output with 72W total system power, and that 72W is the power the machine draws, not the laser power. If a listing only gives an input figure, treat it as input and do not compare it with optical output.

The cut figures below come from each listing, so compare them listing by listing. A 7W optical output cuts 8mm wood and 5mm acrylic on the Carverall K15 Pro, a 12W optical output cuts 15mm paulownia wood and 12mm black acrylic with multi-pass on the ACMER S2, and a 20W optical output cuts 15mm pine wood and 8mm acrylic in a single pass on the Longer Ray5.

Step 3: Check the work area and the cut depth

Work area sets the largest piece you can make in one run. The listings here run from 135×145 mm on the ATOMSTACK Swift 5W to 400 x 400 mm on the AlgoLaser MK3, with 200x300mm on the Carverall K15 Pro and 300 x 300 mm on the ATOMSTACK Swift 7W, ACMER S2 and WIZMAKER Wand.

Cut depth sets the thickest material you can cut. The WIZMAKER Wand cuts wood up to 8mm under suitable settings, the ACMER S2 cuts 15mm paulownia wood and 12mm black acrylic with multi-pass, and the Longer Ray5 cuts 15mm pine wood and 8mm acrylic in a single pass, and 25mm wood and 35mm acrylic with multi-pass. The Ray5 also cuts 0.05mm stainless steel in a single pass.

Check speed the same way. The ATOMSTACK Swift 7W reaches 400mm/s, which the listing also gives as 24,000mm/min, and the Longer Ray5 reaches 24,000 mm/min.

Step 4: Set up safety and ventilation

Safety is part of the setup, not an extra. A laser can start a fire and the smoke from engraving needs to leave the room.

  • Laser class: the Carverall K15 Pro, AlgoLaser 10W and ACMER S2 are Class 1, the Longer Ray5 is Class 2 in one listing and Class 4 in another, and the ATOMSTACK Swift 5W and WIZMAKER Wand are Class 4. Check the class on the listing you buy.
  • Fire safety: the AlgoLaser 10W has flame detection and an emergency stop button, the WIZMAKER Wand has tilt detection and flame monitoring, and the Longer Ray5 has an emergency stop, motion detection and overheat protection. Keep a suitable extinguisher within reach and never leave a running job unattended.
  • Eye protection: use eyewear only if its listing states an optical density and a wavelength range that matches your laser. The ATOMSTACK Swift 5W glasses meet the OD4+ standard.
  • Ventilation: exhaust outdoors or use a filter designed for laser fumes. The Longer Ray5 air pump delivers 10-30 L/min of airflow. See our fume extractor guide.
  • Materials: never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS. They can release harmful fumes and damage the machine.

Step 5: Pick software and a first project

Most of these machines work with LightBurn and LaserGRBL, and the Carverall K15 Pro also works with the CutLabX app over WiFi. The AlgoLaser 10W and MK3 run AlgoOS on a 3.5-inch touchscreen, and the ATOMSTACK Swift 5W ships with free AtomStack software.

Make a practice piece first, on scrap material, and check the focus and the settings before you run the real piece. The Carverall K15 Pro sets up in 90 seconds, the ATOMSTACK Swift 5W unboxes and engraves in 5 minutes, and the AlgoLaser MK3 arrives 95% pre-assembled. If budget is the limit, the laser engraver for beginners guide is the next stop. For drinkware sellers, see the best laser engraver for tumblers page.

Common mistakes to avoid

  • Comparing input power with optical output.
  • Buying a work area that fits the machine, not the project.
  • Skipping ventilation until the smell becomes a problem.
  • Lasering PVC, vinyl or ABS.
  • Using eyewear with no stated optical density or wavelength range.

Low cost laser cutting machine: the short version

  1. Pick one project and one material.
  2. Compare optical output, not input power.
  3. Check the work area and the cut depth.
  4. Set up ventilation, fire safety and eye protection.
  5. Make a practice piece, then run the first job.

Everything after that is repetition: track time, fix bottlenecks and add one project at a time.

FAQ: lasers and CNC

How much power do I need in a low cost laser cutting machine?

It depends on the material and the cut depth. A 7W optical output cuts 8mm wood and 5mm acrylic on the Carverall K15 Pro, a 12W optical output cuts 15mm paulownia wood and 12mm black acrylic with multi-pass on the ACMER S2, and a 20W optical output cuts 15mm pine wood and 8mm acrylic in a single pass on the Longer Ray5. Match the output to the thickest material you plan to cut.

What is the difference between optical output and input power?

Optical output is the laser power that does the cutting, and input is the power the machine draws from the wall. The ACMER S2 lists 12W optical output with 72W total system power. Compare optical output when you compare machines, and do not convert one into the other.

Can a low cost laser cutting machine cut metal?

It depends on the metal. The Longer Ray5 cuts 0.05mm stainless steel in a single pass, and the Carverall K15 Pro lists coated metal among the materials it engraves. The ATOMSTACK Swift 5W listing states it cannot engrave on any type of metal. Check the listing for the metal you plan to use.

What work area do I need?

The listings here run from 135×145 mm to 400 x 400 mm. A 135×145 mm area suits small tags and patches, and a 400 x 400 mm area suits signs and batch work. Match the area to the largest piece you plan to make.

Is a Class 1 laser safer than a Class 4 laser?

The class describes the safety design, not the cutting power. The Carverall K15 Pro, AlgoLaser 10W and ACMER S2 are Class 1, and the ATOMSTACK Swift 5W and WIZMAKER Wand are Class 4. The WIZMAKER Wand adds tilt detection and flame monitoring, and the Swift 5W has tilt protection and automatic shutoff. Use eyewear only if its listing states an optical density and a wavelength range that matches your laser.

Do I need a rotary attachment?

Only if you plan to engrave round objects. The AlgoLaser 10W includes a rotary roller for tumblers, mugs, cups and bottles, and the Longer Ray5 rotary attachment engraves glasses, tumblers and baseball bats. A rotary is an add-on on the ATOMSTACK Swift 5W.

Related: the laser engraver hub, best laser engraver for small business and best laser engraver for wood. Also see our how to price laser engraving work. Also see our how much you can make with a laser engraver.

More buying guides

CNC Routers ·

Low Cost CNC Machine Guide for Beginners

A low cost CNC machine can cut signs, parts and prototypes from wood, acrylic and soft metal once you match its work area, spindle…

Craft Machines ·

Low Cost DTF Printer: What to Buy (2026)

A low cost DTF printer guide comparing print width, printhead, white ink circulation, bundle contents, ink supply and warranty terms for apparel work.

3D Printers ·

Low Cost Handheld 3D Scanner: What to Buy

A low cost handheld 3d scanner turns a real object into a printable model. This guide explains accuracy, object size, tracking, software and exports.