Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Kapton Tape Price: What to Expect

Kapton tape price follows width, length, roll count and heat limits, so this guide explains what changes the amount and which rolls fit printing, heat press work and masking.

Kapton Tape Price: What to Expect
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1STIKPACK High Temperature Heat Resistant PolyimideSTIKPACK High Temperature Heat Resistant Polyimide9.7/10View on Amazon
  2. 22" x 120ft Heat Resistant Sublimation Tape High2" x 120ft Heat Resistant Sublimation Tape High9.6/10View on Amazon
  3. 32 Rolls 1inch x 108ft Polyimide High Temperature2 Rolls 1inch x 108ft Polyimide High Temperature9.5/10View on Amazon
  4. 4EQUTY BAYMERS 1 Roll 20mm X 33m 108ft Heat VinylEQUTY BAYMERS 1 Roll 20mm X 33m 108ft Heat Vinyl9.5/10View on Amazon

Kapton tape price follows the roll in hand: width, length, roll count and heat limits shape the amount, and the material shapes it further. A narrow polyester strip for light masking sits at a different point from a wide polyimide roll built for heat press work. This guide explains each driver, then shows rolls that fit printing, heat press work, soldering and masking.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives no price figures, because the amount charged changes with width, length, roll count and material. Compare the stated width, length and heat limits before choosing.

STIKPACK High Temperature Heat Resistant Polyimide

STIKPACK High Temperature Heat Resistant Polyimide

STIKPACK9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A polyimide tape in 2 inch width and 33 m length, sold as 3 rolls, with a stated range from -73 C to 260 C.

Pros

  • 2 inch width covers wide masking and heat press work in a pass
  • 3 rolls give 324 feet of tape, per the maker
  • Stated range from -73 C to 260 C suits soldering, masking and heat press work
  • The tape resists UV, acids, alkalis, oil, moisture and abrasion, per the maker

Cons

  • 2 inch width needs trimming for narrow masking work
  • No thickness is stated
  • A buyer who needs a small amount still receives 3 rolls
  • No warranty term is stated
2" x 120ft Heat Resistant Sublimation Tape High

2" x 120ft Heat Resistant Sublimation Tape High

Ealyder Tape9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A polyimide tape in 2 inch width and 120 ft length, with a short-term limit of 280 C and a long-term limit of 260 C.

Pros

  • 120 ft length gives a long run for heat press and masking work
  • 280 C short-term limit handles hotter heat press work
  • Clean peel leaves no residue, per the maker
  • 2 inch width covers wide masking in a pass

Cons

  • 1 roll in the set, so a buyer who masks often needs a fresh roll
  • 2 inch width needs trimming for narrow masking work
  • No thickness is stated
  • The bronze color may make the tape edge hard to see on dark parts
2 Rolls 1inch x 108ft Polyimide High Temperature

2 Rolls 1inch x 108ft Polyimide High Temperature

JIJAWA9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A polyimide tape in 1 inch width and 108 ft length, sold as 2 rolls, with a stated continuous limit of 260 C and a peak of 300 C.

Pros

  • 2 rolls give a spare for PCB repair masking and heat press work
  • Continuous limit of 260 C with a peak of 300 C suits soldering and masking
  • Strong adhesion during heat work, with clean removal and no residue, per the maker
  • Thin 0.055 mm layer adds little bulk to a masked part

Cons

  • 1 inch width covers less area in a pass than the 2 inch rolls here
  • No warranty term is stated
  • The dark amber color may make the tape edge hard to see on dark parts
  • A buyer who needs a small amount still receives 2 rolls
EQUTY BAYMERS 1 Roll 20mm X 33m 108ft Heat Vinyl

EQUTY BAYMERS 1 Roll 20mm X 33m 108ft Heat Vinyl

EQUTY BAYMERS9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A polyester film tape in 20 mm width and 33 m length, sold as 1 roll, with a stated maximum of 250 C.

Pros

  • 20 mm width fits narrow circuit board masking and soldering work
  • Stated maximum of 250 C suits heat transfer and sublimation work
  • Clean removal with no residue, per the maker
  • 33 m length gives 108 ft of tape for masking and heat transfer

Cons

  • This roll handles less heat than the polyimide rolls here, with a maximum of 250 C
  • 20 mm width covers less area in a pass than the 2 inch rolls here
  • 1 roll in the set, so a buyer who masks often needs a fresh roll sooner
  • No thickness is stated

Kapton Tape Price: What Changes the Amount

Width sets how much area a strip covers, length sets how much tape a roll holds, roll count sets how much tape arrives in the pack, and heat limits set which work the tape can handle. A 2 inch roll covers wide masking and heat press work, while a 20 mm strip fits narrow circuit board masking. The polyimide rolls here state the higher heat limits, with long-term limits of 260 C, while the polyester roll tops out at a stated maximum of 250 C. The kapton tape uses guide shows where each kind of work fits, and the cost of heat press guide covers the press side of the amount.

How Width, Length and Roll Count Shape the Amount

Start with the width the work needs. The rolls here span 20 mm to 2 inch, and the wider strips suit masking across broad parts and heat press work, with powder coating listed for the STIKPACK set, while the narrow strip suits circuit board masking and soldering. Length runs from 108 ft to 120 ft, and roll count runs from 1 roll to 3 rolls: the STIKPACK set lists 324 feet across 3 rolls.

Kapton Tape Price: The Picks

Width, length and roll count set the amount, so the rolls below cover the widths and lengths that shape kapton tape price.

What to Check Before Ordering

Heat limits matter where the tape meets heat. The rolls here state limits of 250 C and 260 C, with a short-term limit of 280 C and a peak of 300 C on the rolls that state them. Match the limit to the work: soldering and circuit board protection need a tape that holds up at the heat the work reaches, and heat press work needs a tape that holds up without curling, warping or adhesive failure. Three makers state clean removal with no residue, and STIKPACK says residue is not easily left. For work on a printer bed, the 3D printer adhesion problems guide covers bed adhesion, and the sublimation tumbler guide shows heat press work in practice.

FAQ: lasers and CNC

What changes kapton tape price the most?

Width, length, roll count and heat limits change the amount most. A 2 inch polyimide roll with a stated limit of 260 C covers different work from a 20 mm polyester strip with a stated maximum of 250 C.

Is wider kapton tape worth it for a 3D printer?

A 2 inch strip covers a wide bed area in a pass, while a 20 mm strip fits narrow masking on a circuit board or a small part. Match the width to the area the work needs.

What heat limit should kapton tape handle for soldering and masking?

The rolls here state limits of 250 C and 260 C, a short-term limit of 280 C and a peak of 300 C, so pick a roll with a stated limit above the heat the work reaches.

Does kapton tape leave residue after a heat press?

Three makers state clean removal with no residue, and STIKPACK says residue is not easily left.

How long is a roll of kapton tape?

The rolls here state lengths of 108 ft and 120 ft, with 33 m and 36 m in metric. The STIKPACK set lists 324 feet across 3 rolls.

Related: the 3D printers hub, kapton tape uses and cost of heat press, plus the 3D printer adhesion problems guide and the sublimation tumbler guide.

More buying guides

3D Printers ·

Kapton Tape Temperature Rating Explained

MYJOR states 500F continuous and 536F in short peaks, the highest figures here, so match the stated figure to your soldering, printing or masking…