Cost of Heat Press: What Affects the Price
The cost of a heat press comes down to platen size, press type, attachments and build, and this guide explains each factor so you can compare machines with confidence.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cricut AutoPress™ 2 15x15 Heat Press Machine for T Shirts &9.7/10View on Amazon - 2
HORGELU Upgraded 5 in 1 Heat Press Machine 12x15 Inch Heat9.7/10View on Amazon - 3
HTVRONT Heat Press Machine for T Shirts 12X10 with Pressure9.7/10View on Amazon
The cost of heat press machines is the first question most makers ask before they press a shirt for a customer, and the answer is that it depends on what the machine has to do. A press built for flat shirts alone costs less to make than a combo press that also handles mugs, hats and plates, because each added job needs its own attachment and heating element. This guide explains the factors that set the cost of heat press equipment, from platen size and press type to attachments and the supplies that keep it running, so you can compare machines on the features that matter for your projects.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
This guide gives no price figures, because prices change and machines vary. Instead it explains the factors that set the cost of heat press machines, with the figures that makers state for size, attachments and warranty.
What the cost of heat press covers
The cost of a heat press covers the frame, the heating element, the controls and the attachments in the box. A larger platen needs more heating power and a heavier frame, so size is the main driver. The press type matters too: a swing-away press needs a pivot arm and a wider base, while a simpler press has fewer moving parts. Attachments add cost for each new job the machine can do, and controls such as a digital display, an audible alarm and overheat protection add parts of their own. The warranty term also plays a role, because a longer term means the maker stands behind the machine for more months.
Platen size and work area
The work area decides which blanks fit on the press. A press with a 12 x 15 inch work area fits a full shirt front, while a smaller platen suits small designs and short runs. The OIIEE combo press (on Amazon) states a 12 x 15 inch work area, and its body measures 19.0 inches by 18.0 inches by 17.0 inches, so it needs a sturdy table and room around it for the swing arm. A bigger platen also needs a heavier frame to keep pressure even across the full surface. When you compare presses, match the work area to the largest blank you plan to press, not to the smallest, because a platen that is too small limits every job that follows.
Press type and how it opens
A swing-away press moves the heating element to the side on a pivot arm, so you can lay out a shirt without reaching under a hot platen. The OIIEE combo press states a 360-degree swing-away design with a slide-out base, which gives a stable working area and keeps hands clear of the heat. A clamshell press opens upward like a lid and takes less bench space, while a drawer press slides the lower platen out toward you. Each style changes the frame, the hinge and the base, and that changes what the machine costs to build. Think about your bench space and how you lay out each blank, then pick the opening style that fits the way you work.
Attachments: one machine, more projects
A combo press earns its keep by swapping attachments. The OIIEE combo press states five functions in one machine: a 12 x 15 inch shirt press, an 11oz mug press, a hat press and two plate press attachments. Each attachment is a separate heating element with its own shape and wiring, so a combo press costs more to build than a press that handles flat items alone. The mug attachment matters if you plan to press drinkware, and the hat attachment matters for caps. The best multi-function heat press machine guide compares combo presses side by side. Before you pay for attachments, list the items you will press in the next year and check that each one has a matching attachment in the box.
Heat, controls and safety features
Even heat is the job of the heating element. The OIIEE combo press states a double-tube heating system with a Teflon-coated plate, 2 layers of insulation cotton and a thick silicone pad, which spread heat across the platen. The digital LCD controller sets time and temperature, and an audible alarm sounds when the transfer is done. Overheat protection shuts the press off if the temperature climbs too high, and the slide-out base keeps the work area clear. The press also ships with heat-resistant mats and a reusable Teflon sheet, and its silicone pads are rated resistant up to 750°F. These parts add cost, and they also decide how steady the results are from one press to the next. The parts of a heat press guide names each part and what it does.
Running costs beyond the machine
The machine is only part of what you spend. Blanks such as shirts, mugs, hats and plates, transfer paper, vinyl and ink all add up with each order, and you will replace worn pads and Teflon sheets over time. A press that takes standard blanks costs less to run than one that needs special sizes, so check blank prices before you settle on a machine. The how much a sublimation printer costs guide covers the printer side of a sublimation setup, and the temperature guide for heat press shows the settings makers state for each material. Add the machine, the blanks and the consumables together to see the full cost of getting started.
How to compare heat presses before you buy
- Match the work area to your largest blank: a 12 x 15 inch platen fits a shirt front, and a smaller platen suits small designs.
- Count the attachments in the box: a 5-in-1 combo covers shirts, an 11oz mug, hats and plates, while a flat press covers flat items alone.
- Check the controls: a digital display, an audible alarm and overheat protection make each press steadier.
- Read the warranty term: the OIIEE combo press states a 12 months warranty and a 1 month money-back policy.
- Measure your bench: the OIIEE combo press measures 19.0 inches by 18.0 inches by 17.0 inches, so leave room for the swing arm.
FAQ: lasers and CNC
How much does a heat press cost?
It depends on platen size, press type, attachments and controls. A combo press with a 12 x 15 inch work area and attachments for an 11oz mug, hats and plates costs more to build than a flat press alone, because each attachment adds a heating element and wiring. Compare machines on those features rather than on a single figure.
What size heat press suits shirts?
A 12 x 15 inch work area fits a full shirt front and suits most shirt projects. Smaller platens suit small designs and short runs, and a larger platen needs a heavier frame and more bench space. Match the work area to the largest blank you plan to press.
When is a mug press attachment needed?
You need one only if you plan to press drinkware. The OIIEE combo press states an 11oz mug press attachment alongside its shirt, hat and plate attachments, so one machine covers mugs without a second press. If you press shirts alone, a flat press covers the job. The best mug heat press for sublimation guide compares mug presses.
What safety features should a heat press have?
Look for overheat protection that shuts the press off, an audible alarm that sounds when the transfer is done, and a design that keeps hands clear of the hot platen. The OIIEE combo press states a 360-degree swing-away arm and a slide-out base for that reason, plus heat-resistant mats and a Teflon sheet in the box.
How long is the warranty on a heat press?
It varies by maker, so read the term before you buy. The OIIEE combo press states a 12 months warranty and a 1 month money-back policy. A longer term means the maker covers the machine for more months, and it is worth comparing across the machines on your shortlist.
What else is needed besides the press?
You need blanks, transfer paper or vinyl, and the pads and sheets that protect each press. The OIIEE combo press ships with heat-resistant mats and a reusable Teflon sheet, and its silicone pads are rated resistant up to 750°F. The manual heat press machine guide explains how a manual press works.
Related: the craft machines hub, best heat press machine for small business and what is the best heat press machine. Also see the Cricut heat press size guide and heat press temperature for DTF.




