Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Plastic Sheet Material for Engraving

Types of plastic sheet material for laser engraving explained by material, color layer, thickness and stated laser use, with sheet packs compared for signs, badges and labels.

Types of Plastic Sheet Material for Engraving
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Trotec TroLase | 12"x12"x1/16, 8 PcsTrotec TroLase | 12"x12"x1/16, 8 Pcs9.5/10View on Amazon
  2. 2KINLINK 12x16 3mm 1/8" Black Cast Acrylic SheetsKINLINK 12x16 3mm 1/8" Black Cast Acrylic Sheets9.5/10View on Amazon
  3. 3Creatorally 8PCS Laser Engraving ABS Double ColorCreatorally 8PCS Laser Engraving ABS Double Color9.4/10View on Amazon
  4. 4Bocolon 5PCS Laser Engraving Double Color ABSBocolon 5PCS Laser Engraving Double Color ABS9.4/10View on Amazon

If you make signs, badges, labels or plaques to sell, the sheet you choose decides the contrast, the edge finish and the laser settings you can use. Types of plastic sheet material for laser engraving include layered engraving sheets with a contrasting core and solid cast acrylic sheets, and the right choice depends on the mark you want and the laser you run.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Material safety note

Never laser PVC, vinyl, PVC faux leather, polycarbonate or ABS. ABS sheets in this guide carry maker engraving claims, and this site does not recommend lasering ABS. Exhaust fumes outdoors or filter them, keep an extinguisher within reach, and never leave a running job unattended.

Trotec TroLase | 12"x12"x1/16, 8 Pcs

Trotec TroLase | 12"x12"x1/16, 8 Pcs

TROTEC9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Modified acrylic two-ply sheets, Black top with White core, stated for laser engraving badges, labels and signs.

Pros

  • Black top with White core for contrast
  • Maker states CO2 and diode laser use
  • Maker states UV stable material for outdoor signs
  • Engraves: core shows through surface; Cuts: laser, saw and guillotine stated

Cons

  • No warranty term is stated
  • Black with White core only
  • 12 by 12 inch sheets are small for larger signs
  • 0.06 inch thickness is thin for thick parts
KINLINK 12x16 3mm 1/8" Black Cast Acrylic Sheets
KINLINK9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of 12 x 16 inch opaque black cast acrylic sheets with 0.13 inch thickness, zero light transmittance and protective paper masking.

Pros

  • Four 12 x 16 inch cast acrylic sheets totaling 1.61 kg in weight
  • Opaque black surface with stated 0% light transmittance for high-contrast engraving
  • Protective paper masking on the surface protects against scratches and fingerprints
  • Absorbs diode and CO2 laser wavelengths effectively for clean cutting and etching

Cons

  • No warranty term is stated in the listing
  • Bullets mistakenly refer to Lexan, even though polycarbonate must not be laser cut
Creatorally 8PCS Laser Engraving ABS Double Color

Creatorally 8PCS Laser Engraving ABS Double Color

Creatorally9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Double-layer ABS sheets in Black and White with protective film, listed for engraving badges, logos and signage.

Pros

  • Contrasting surface and core for badges and logos
  • Protective film on each sheet stated by maker
  • Maker states indoor and outdoor weather resistance
  • Engraves: laser and CNC listed; Cuts: above 20W stated

Cons

  • No warranty term is stated
  • ABS: this site does not recommend lasering ABS
  • Cutting limited to machines above 20W per maker
  • Maker notes slight size and thickness variations
Bocolon 5PCS Laser Engraving Double Color ABS

Bocolon 5PCS Laser Engraving Double Color ABS

Bocolon9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Golden and Black two-tone ABS sheets listed for name badges, office labels, signs and plaques.

Pros

  • Golden and Black sheets for badges and labels
  • Maker states indoor and outdoor sign use
  • Maker states custom size and color contact
  • Engraves: badges and labels listed; Cuts: to size stated

Cons

  • ABS sheets carry the site warning on lasering ABS
  • 5 pieces per pack limits badge batch size
  • Golden and Black pair only in this pack
  • Thin 0.05 inch sheets suit surface marks

Types of plastic sheet material at a glance

Layered engraving sheets have a surface over a contrasting core, so engraving shows the core color for badges, labels and signs. Solid cast acrylic has color through the sheet for signs, table numbers and cut parts. ABS packs, modified acrylic packs and cast acrylic packs in this guide differ in material, color pair and stated laser use. See the engraving materials hub for related guides.

Layered engraving sheets for badges and labels

The Trotec TroLase (on Amazon) pack pairs Black with White, the Creatorally ABS Sheet (on Amazon) pack is Black and White, and the Bocolon ABS Sheet (on Amazon) pack pairs Brushed Golden with Black. The Trotec TroLase maker states CO2 and diode laser use. Laser type is Not stated for the Creatorally ABS Sheet and Bocolon ABS Sheet packs here. See diode vs CO2 laser for plastic.

Cast acrylic sheets for signs and cut parts

The KINLINK Cast Acrylic (on Amazon) pack is solid black cast acrylic with protective paper, listed by the maker for acrylic signs, wedding table numbers, invitations and display cases. The maker lists table saw, jigsaw, drill, router and band saw cutting, and directs users to peel the protective paper off before use. Read can you cut acrylic with a laser cutter before planning laser cuts.

Check laser type, ventilation and fire safety

Match the sheet to the laser type stated by the maker, and treat unstated laser use as Not stated. Exhaust fumes outdoors or use a filter for laser fumes, keep an extinguisher within reach, and use eyewear only if its maker states optical density and a wavelength range that matches your laser. Never laser PVC, vinyl, PVC faux leather, polycarbonate or ABS.

Plastic sheet packs to compare

Use the packs below when you need layered sheets for badges and labels or solid cast acrylic for signs and cut parts, matched to laser type and sheet size.

Types of plastic sheet material: the short version

  1. Choose layered sheets for contrasting badges, labels and plaques.
  2. Choose solid cast acrylic for cut shapes with a same-color edge.
  3. Check stated laser type, size and thickness before you order.
  4. Keep ABS, PVC, vinyl, PVC faux leather and polycarbonate out of the laser.

FAQ: lasers and CNC

What is the difference between ABS and acrylic engraving sheets?

ABS packs here are layered sheets listed for badges, labels and signs. Acrylic packs here include modified acrylic layered sheets and solid cast acrylic sheets. Check the exact pack for size, thickness and stated laser use.

Can you laser ABS plastic sheets?

No. This site does not recommend lasering ABS, PVC, vinyl, PVC faux leather or polycarbonate. For laser work, choose a sheet whose maker states laser use for your laser type, with ventilation and fire safety in place.

Which plastic sheets work with a diode laser?

The Trotec TroLase maker states CO2 laser engraving and cutting and diode laser engraving use. Laser type is Not stated for the Creatorally ABS Sheet, Bocolon ABS Sheet and KINLINK Cast Acrylic packs here. Check the maker manual before you buy.

How thick are the plastic sheets in this guide?

Trotec TroLase sheets are stated as 0.06 in thick, Creatorally ABS Sheet and Bocolon ABS Sheet sheets as 0.05 in thick, and KINLINK Cast Acrylic sheets as 3 mm thick. Match thickness to the stated cutting method.

Related: best black acrylic sheet and acrylic sheets how to cut.

More buying guides

Engraving Materials ·

How to Cut Clear Polycarbonate Sheet

Score thin clear polycarbonate sheet with a carbide cutter and snap it along the line, or slice short pieces with a heavy-duty hand cutter.