Bobbin Parts of a Sewing Machine Explained
The bobbin parts of a sewing machine are the bobbin, the bobbin case, the tension spring and the latch, and this guide explains what each one does and how to match a case to your machine.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Presser Foot Set 42Pcs9.7/10View on Amazon - 2
Fbshicung 13Pcs Presser Feet Set for Household Sewing Machine9.6/10View on Amazon - 3
Windman 3 Sizes Wide Rolled Hem Pressure Foot Sewing Machine9.6/10View on Amazon
A seam that loops on the underside, a bobbin that rattles in its case, a hem that puckers for no clear reason. When the underside of a stitch misbehaves, the trouble usually sits below the needle plate, not above it. The bobbin parts of a sewing machine are the bobbin, the bobbin case, the tension spring and the latch, plus the storage box that keeps wound bobbins sorted, and this guide walks through each part in the order thread travels through it.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Bobbin parts of a sewing machine at a glance
- Bobbin. The small spool that holds the lower thread.
- Bobbin case. The metal cup that holds the bobbin and guides the thread under the tension spring.
- Tension spring. The flat spring on the case that the thread slides under.
- Latch. The small lever that locks the case into the machine.
- Bobbin box. The storage case with a slot for each wound bobbin.
Each part does one job, and a fault in any one of them shows up in the stitch.
The bobbin
The bobbin is a small spool that carries the lower thread. The needle thread loops around the bobbin thread to form each stitch, so a bobbin wound unevenly or filled past its rim shows up in the seam as loops or puckers. Bobbins come in classes that match the machine: the Sewing Parts Online case (on Amazon) in the reference listings takes Class 15/A style bobbins, and the sewing machine bobbin size chart sorts the common classes. A bobbin of the wrong class may not seat correctly in the case, and the thread may not feed evenly.
The bobbin case
The bobbin case is the metal cup the bobbin sits in. It holds the bobbin in place under the needle plate and guides the thread out under the tension spring. The Mudder and yayaboqu cases are stainless steel and made for front-loading Class 15 machines. The Mudder case (on Amazon) measures approx. 22.75 mm in diameter, and the package includes 4 pieces. The yayaboqu case (on Amazon) measures 0.81 inches in diameter, with interior dimensions of 0.79 inches, and its package holds 4 cases with a 1 Year Manufacturer warranty. The Sewing Parts Online case measures 1.6 inches by 1.4 inches by 0.5 inches and replaces part XC3152221, made for Brother machines such as the CE1100PRW, CS6000I and PE770, and Babylock machines such as the BL80B Jubilant and Verve BLMVR. Alternate part numbers for that case include XF5707001, XE7560001 and XC3152021.
The tension spring and latch
The tension spring is a flat spring fixed to the side of the case. Thread from the bobbin slides under it on the way out, and the spring holds the thread back while each stitch pulls tight. If the spring is bent or clogged with lint, the lower thread feeds too freely and the seam loops on the underside. The latch is the small lever on the face of a front-loading case. Press it to lift the case out of the machine, and release it to lock the case back in place. The Mudder case lists a latch and smooth thread feed, and the maker says bobbins stop spinning more quickly when sewing stops and starts, which prevents unraveling or tangling of bobbin thread. A case that will not latch, or a latch that sticks, is a sign to clean the case and check the spring. Lint gathers around the spring and the latch, so brush the area out when you change the bobbin.
The bobbin box
The bobbin box is storage, but it is storage that protects the thread. A wound bobbin left loose in a drawer unwinds, picks up dust and tangles with its neighbors. The YEQIN box (on Amazon) is a transparent plastic case with 25 slots, and each box holds 25 machine bobbins, with a window so you can find the bobbin you want without opening the lid. The listing is for bobbin boxes only, with no bobbins included. The BAGTeck listing is for (2) bobbin boxes, and each box holds 25 machine bobbins in a compact design of 4 3/4 inches by 4 inches by 1 inch, with a compartment for each spool to keep the spools separated. Both boxes are tough polypropylene that can be reused many times, and both are small enough to carry to a class. A box with a slot for each bobbin also stops you from mixing classes: keep Class 15 bobbins in one box and label it.
How the parts work together
Thread travels through the bobbin parts in a fixed order. Wind the bobbin, then place it in the case so it turns freely. Pull the thread under the tension spring, following the slot on the side of the case, then, on a front-loading case, press the latch and seat the case in the machine until it locks. The needle carries the top thread down through the fabric, loops it around the bobbin thread, and pulls the stitch tight. The tension spring holds the bobbin thread back while the top thread pulls, which keeps each stitch inside the fabric. When a seam loops underneath, the fault is usually in this chain: a bobbin wound too loosely, thread that missed the spring, lint under the spring, or a case that did not latch. The how to wind a sewing machine bobbin guide covers the winding step, and the bobbin on sewing machine problems guide walks through the common faults.
Matching a bobbin case to your machine
Start with the class and the loading type. The Mudder and yayaboqu cases are Class 15 and front-loading; the Sewing Parts Online case takes Class 15/A style bobbins. Then check the part number: the Sewing Parts Online case replaces part XC3152221, and its fit list names Brother models from the CE1100PRW to the SQ9185 and Babylock models from the BL80B Jubilant to the Verve BLMVR. Then check the size. The Mudder case measures approx. 22.75 mm in diameter, while the yayaboqu case measures 0.81 inches in diameter with interior dimensions of 0.79 inches, so cases that share a class can still differ in size and fit. If your machine is not on the fit list, the bobbin size chart and the sewing machine replacement parts guide help you narrow it down. If you are shopping for a machine as well, the best sewing machine for beginners to make clothes guide and the best sewing machine for denim and beginners guide compare machines by the work they suit. A spare case in the drawer guards against a lost latch spring, and the sewing machine maintenance kit guide lists what else to keep on hand.
FAQ: lasers and CNC
What is the bobbin on a sewing machine?
The bobbin is the small spool under the needle plate that holds the lower thread. The needle thread loops around the bobbin thread to form each stitch, so the bobbin, case and tension spring all shape the seam. A bobbin wound unevenly shows up as loops or puckers on the underside.
What size bobbin case fits a machine?
Match the class, the loading type and the part number. The Mudder and yayaboqu cases are Class 15 and front-loading, and the Sewing Parts Online case takes Class 15/A style bobbins and replaces part XC3152221. The Mudder case measures approx. 22.75 mm in diameter and the yayaboqu case 0.81 inches, so check the size as well as the class.
How many bobbins does a bobbin box hold?
Each box in the reference listings holds 25 machine bobbins. The YEQIN box has 25 slots with a transparent window, and the BAGTeck listing is for (2) bobbin boxes, each holding 25 bobbins. Neither listing includes bobbins, so the boxes arrive empty.
Do bobbin cases wear out?
Yes, slowly. The tension spring can bend, the latch can stick, and the case can pick up nicks that snag thread. The Mudder and yayaboqu cases are stainless steel, which resists wear, and the yayaboqu case carries a 1 Year Manufacturer warranty. Clean lint from the spring and latch when you change the bobbin, and replace the case when the tension goes uneven.
Can any bobbin go in any machine?
No. Bobbins come in classes, and the case has to match the class and the loading type of the machine. The Sewing Parts Online case takes Class 15/A style bobbins, and the Mudder and yayaboqu cases are made for front-loading Class 15 machines. Check the bobbin size chart before ordering, and keep each class in its own labeled box.
Related: the sewing machine parts labeled guide, embroidery machine parts, learn how to repair sewing machines, and the sewing and embroidery machines hub. Also see the embroidery machine tension issues guide.




