Sewing Machine Bobbin Size Chart: Class 15, 15J and A
A sewing machine bobbin size chart for Class 15, Class 15J and Class A bobbins, with the sizes the makers state and matching bobbins for each class.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Janome 12 Pack Pre-Wound Plastic Bobbins Thread 809.7/10View on Amazon - 2
28 Pcs Class 15 Plastic Sewing Machine Bobbins9.6/10View on Amazon - 3
50 pcs Bobbins for Sewing Machine- Eoehro9.6/10View on Amazon - 4
72Pcs 36 Colors Prewound Bobbins and Thread Spools9.5/10View on Amazon
A bobbin that does not match the machine wastes thread and stalls a project, so the size has to be right before the bobbin goes in. A sewing machine bobbin size chart lists the stated sizes for each bobbin class, and the chart below gives the sizes the makers state, with the prewound and empty bobbins that fit each class in the gear section below.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Janome 12 Pack Pre-Wound Plastic Bobbins Thread 80
Pre-wound Class 15 bobbins with 80 yards of white polyester thread each, in a 12-pack for Janome top and front-loading machines.
Pros
- Each bobbin comes pre-wound with 80 yards of 100 percent spun polyester white thread
- Fits Janome top and front-loading machines using Class 15 and 15J bobbins
- Ready to sew with no winding step
- 12 bobbins in a portable pack
Cons
- No warranty term is stated
- Excludes MB4 and the 1600P series machines
- White thread only, so other colors need a separate bobbin
- A 12-pack covers fewer color changes than the 36-color set

28 Pcs Class 15 Plastic Sewing Machine Bobbins
28 empty Class 15 plastic bobbins with a transparent storage box, sized 0.80 inches across and 0.45 inches high.
Pros
- 28 bobbins plus a transparent storage box in one set
- Full size stated: 0.80 inches outer diameter, 0.24 inches inner diameter, 0.45 inches outer height
- Smooth, burr-free plastic edges that wind thread neatly
- Fits Singer, Brother and Janome household machines
Cons
- Empty bobbins need winding before use
- Not suitable for industrial sewing machines
- No thread included, so thread must be bought separately
- Class 15 only, so other bobbin classes need a different set

50 pcs Bobbins for Sewing Machine- Eoehro
50 empty Class 15 bobbins in clear plastic, 0.8 inches in diameter and 0.45 inches high, for SA156, 15J and Class 15 machines.
Pros
- 50 bobbins in one set, the largest empty-bobbin count here
- Standard Class 15 size: 0.8 inches diameter and 0.45 inches height
- Clear plastic shows the thread level at a glance
- Listed for SA156, 15J and Class 15 machines
Cons
- No warranty term is stated
- Empty bobbins need winding and thread bought separately
- No storage box included, only a reusable plastic bag
- Plastic bobbins only, with no metal option in the set

72Pcs 36 Colors Prewound Bobbins and Thread Spools
72 pieces in 36 colors: 36 thread spools and 36 prewound bobbins, each bobbin holding 40 yards of polyester thread.
Pros
- 36 colors of thread spools and 36 prewound bobbins in one box
- Each prewound bobbin holds 40 yards of 100 percent polyester thread
- Listed as Class A and Class 15 for most sewing machines
- Suits hand sewing, machine sewing and travel kits
Cons
- Not suitable for Singer Futura embroidery machines
- 36 colors may leave unused colors in the box
- Prewound bobbins only, with no empty bobbins for custom thread
- Thread comes only in the 36 colors in the box
Sewing machine bobbin size chart
Class 15 is the size the listings state most often. The chart uses only the sizes the makers state: where a size is not stated, the chart says so.
| Bobbin class | Outer diameter | Height | Inner diameter | Thread per bobbin |
|---|---|---|---|---|
| Class 15 | 0.80 inches | 0.45 inches | 0.24 inches | 40 yards (HDST-HOME prewound bobbin) |
| Class 15J | Not stated | Not stated | Not stated | 80 yards (Janome pre-wound bobbin) |
| Class A | Not stated | Not stated | Not stated | 40 yards (HDST-HOME prewound bobbin) |
The 0.80 inch diameter, 0.45 inch height and 0.24 inch inner diameter come from the kidoom Class 15 (on Amazon) set. The 40 yard figure is the thread on each HDST-HOME prewound bobbin (on Amazon), listed as Class A and Class 15, and the 80 yard figure is the thread on each Janome pre-wound bobbin (on Amazon) for Class 15 and 15J machines.
How to match a bobbin to your machine
Start with the machine manual, which names the bobbin class the machine takes. Then measure the bobbin the machine already uses: outer diameter across the widest point, height from flange to flange, and inner diameter across the center hole. The kidoom Class 15 set states 0.80 inches across, 0.45 inches high and 0.24 inches at the center hole.
Fit is not only about size. The kidoom bobbins are not suitable for industrial sewing machines, the HDST-HOME set is not suitable for Singer Futura embroidery machines, and the Janome pre-wound bobbins exclude MB4 and the 1600P series.
Bobbins that fit the chart
The 4 bobbin sets below cover the chart above: pre-wound bobbins for ready sewing and empty bobbins for winding at home.
FAQ: lasers and CNC
What size bobbin does a Brother sewing machine use?
The listings here name Class 15 bobbins for Brother machines. The kidoom Class 15 set lists Singer, Brother and Janome, and the HDST-HOME set lists Brother among the machines its Class A and Class 15 bobbins suit. Check the machine manual first.
Are Class 15 and Class 15J bobbins the same size?
The listings group the two classes together but state no separate size for Class 15J: the Eoehro set lists SA156, 15J and Class 15 together, and the Janome pre-wound bobbins fit machines using Class 15 and 15J bobbins. Measure the bobbin from the machine and match it to the chart before ordering.
How do I measure a bobbin?
Measure outer diameter across the widest point, height from flange to flange, and inner diameter across the center hole. The kidoom Class 15 set states 0.80 inches across, 0.45 inches high and 0.24 inches at the center hole.
Can I use a Class 15 bobbin in any sewing machine?
No. The kidoom Class 15 bobbins are not suitable for industrial sewing machines, the HDST-HOME set is not suitable for Singer Futura embroidery machines, and the Janome pre-wound bobbins exclude MB4 and the 1600P series.
What is the difference between a prewound bobbin and an empty bobbin?
A prewound bobbin arrives with thread already wound: the Janome bobbins carry 80 yards of white polyester thread each, and the HDST-HOME bobbins carry 40 yards each in 36 colors. An empty bobbin carries no thread, so the sewer winds thread onto it before sewing.
Related: the best bobbins for Brother sewing machine guide, the best embroidery machine bobbins under 15 guide and the best thread for embroidery machine guide. Also see the sewing machine Brother vs Singer comparison, the embroidery machine hoop sizes guide and the sewing and embroidery machines category.




