How to Wind a Sewing Machine Bobbin
Wind a sewing machine bobbin by seating it on the winder, threading the guide, and winding until full, then fit it in the case and draw the thread up.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Brother Sewing and Embroidery Bobbins 10-Pack9.6/10View on Amazon - 2
50 Pcs bobbins for Sewing Machine- Eoehro9.6/10View on Amazon - 3
YEQIN 25 Pcs Bobbins for Sewing Machine9.6/10View on Amazon - 4
UzecPk Sewing Thread 25 Pcs Bobbins for Sewing9.5/10View on Amazon
A sewing machine bobbin holds the thread that locks every stitch from below, and winding it is the small job that stands between a full spool and a finished seam. Learning how to wind a sewing machine bobbin is a short job: seat the empty bobbin on the winder, run the thread through the guide, wind until the bobbin looks full, then fit it in the bobbin case and draw the thread up through the needle plate. The steps below walk through each part in order, with the mistakes that leave thread tangled or stitches loose.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Bobbin sizes are not universal. The bobbins in this guide are Class 15 and SA156 size, which fit machines that take Class 15 bobbins, so confirm the size in the machine manual before ordering.

Brother Sewing and Embroidery Bobbins 10-Pack
A 10-pack of clear SA156 bobbins, 11.5 mm, made by Brother for Brother sewing and embroidery machines.
Pros
- Genuine Brother accessory, made for Brother sewing and embroidery machines
- Clear, transparent plastic lets you see when the bobbin thread is running low
- Security notch for consistent bobbin thread winding
- Premium quality plastic bobbins can be reused many times
Cons
- 10 bobbins only, so spares run out sooner than the larger packs
- No storage box comes with the pack, so bobbins need a separate case
- Sized for Brother machines, so buyers with other brands should confirm the fit first
- No warranty term is stated

50 Pcs bobbins for Sewing Machine- Eoehro
A pack of 50 Class 15 bobbins, 0.8 inches across and 0.45 inches high, with 2 storage boxes.
Pros
- 50 bobbins in the pack, so spares are on hand for many colors
- 2 storage boxes with individual slots keep bobbins sorted and easy to find
- Class 15 and SA156 size, made to fit most sewing machines
- Resistant plastic that will not damage the thread while it winds
Cons
- 50 bobbins is more than a casual sewer needs, so spares sit unused
- Plastic bobbins, not metal, so they do not suit machines that need metal bobbins
- The pack measures 9.0 x 5.0 x 1.0 in, so it takes space in a small sewing kit
- Fits most machines, not every machine, so the Class 15 size still needs checking

YEQIN 25 Pcs Bobbins for Sewing Machine
A pack of 25 Class 15 bobbins, 7/16 inches deep, in a storage box, made for Brother and Singer machines.
Pros
- 25 bobbins in a durable plastic storage box, ready to carry
- Class 15 size, 7/16 inches deep, for home sewing and embroidery machines
- Security notch for consistent bobbin thread winding
- Transparent plastic lets you see the bobbin thread running
Cons
- Empty bobbins, so each one still needs winding before use
- Lists Brother, Janome, Singer and Baby Lock machines, so other brands need a size check first
- No warranty term is stated
- The bobbins are 7/16 inches deep, so they do not suit machines that take a different depth

UzecPk Sewing Thread 25 Pcs Bobbins for Sewing
A box of 25 prewound Size A SA156 bobbins, 10 black and 15 white, each holding 50 yards of polyester thread.
Pros
- Prewound bobbins, so there is no need to wind the spool yourself
- Each spool holds 50 yards of polyester thread
- Size A SA156 bobbins, compatible with most sewing machines
- Transparent storage box keeps the spools sorted and easy to find
Cons
- Only black and white thread, so colors beyond those two need a separate spool
- 50 yards per spool, so a large project needs more than one spool
- The thread is polyester only, so cotton or silk projects need a different spool
- Size A SA156 only, so machines that take a different bobbin size need another pack
Step 1: Match the bobbin to the machine
Bobbin size comes before winding. The bobbins in this guide are Class 15 and SA156 size, for machines that take Class 15 bobbins. The Eoehro bobbins are made to fit most sewing machines, and the YEQIN bobbins (on Amazon) list Brother, Janome, Singer and Baby Lock machines among the fits, while the Brother bobbins (on Amazon) are made for Brother sewing and embroidery machines. Check the size the machine manual states, then pick the pack that matches it.
Step 2: Seat the bobbin on the winder
Place the empty bobbin on the winder spindle and push it across until it sits in the winding position. Pull thread from the spool on the spool pin, run it through the thread guide and the tension disc on the winder, then wrap the loose end around the bobbin and hold it while the winder starts. Keep the thread path clear of the needle area while the bobbin turns.
Step 3: Wind the thread on evenly
Start the machine and let the winder fill the bobbin, guiding the thread so it lays flat across the bobbin instead of piling up at one end. Watch the thread level through the clear plastic: the clear bobbins in this guide let you see the thread as it winds, and the same clear view shows the bobbin filling. Stop when the bobbin looks full, cut the thread, and slide the bobbin off the spindle. The thread for embroidery machine guide covers thread weight and type for machine work.
Step 4: Fit the bobbin in the case and draw up the thread
Drop the wound bobbin into the bobbin case with the thread unwinding in the direction the machine manual shows, pull the thread through the tension slot, and leave a tail to draw up. Hold the needle thread, turn the handwheel until the needle dips below the plate and comes back up, then pull the loop of bobbin thread through and lay both threads behind the presser foot. A short seam on scrap fabric shows whether the stitches lock cleanly.
How to wind a sewing machine bobbin: the bobbins that fit
Winding starts with the right bobbin, so the packs below cover the size check and the winding, with prewound bobbins for readers who want to skip winding entirely.
Common mistakes to avoid
- Winding a bobbin that does not fit the machine, instead of checking the Class 15 size first.
- Letting the thread pile up at one end of the bobbin instead of laying it flat across the bobbin.
- Winding past full, so the thread binds and the bobbin will not seat in the case.
- Skipping the thread guide on the winder, which leaves the wind loose and uneven.
- Dropping the bobbin in the case with the thread unwinding the wrong way, so the tension is wrong and the stitches loop instead of locking cleanly.
How to wind a sewing machine bobbin: the short version
- Check the bobbin size: Class 15 and SA156 size.
- Seat the empty bobbin on the winder spindle.
- Run the thread through the guide and wind until the bobbin looks full.
- Fit the wound bobbin in the case and draw the thread up through the needle plate.
- Sew a short seam on scrap fabric and check that the stitches lock cleanly.
- Use a prewound bobbin when winding is not needed.
FAQ: lasers and CNC
What size bobbin does my sewing machine take?
It depends on the machine. The bobbins in this guide are Class 15 and SA156 size, for machines that take Class 15 bobbins. The Eoehro and YEQIN bobbins are made to fit most household sewing machines. The YEQIN bobbins are 7/16 inches deep, the Brother bobbins are 11.5 mm, and the Eoehro bobbins are 0.8 inches across and 0.45 inches high. Confirm the size in the machine manual before ordering.
Can I use prewound bobbins instead of winding my own?
Yes. The UzecPk box holds 25 prewound Size A SA156 bobbins, 10 black and 15 white, each holding 50 yards of polyester thread, so there is no need to wind the spool yourself. They fit most sewing machines and embroidery machines.
How do I know when the bobbin is full?
Watch the thread through the clear plastic. The Brother bobbins are clear, transparent plastic that lets you see when the bobbin thread is running low, and the YEQIN bobbins are transparent so you can see the thread running. Stop winding when the bobbin looks full and the thread sits level with the bobbin edge.
Can I reuse plastic bobbins?
Yes. The YEQIN and Brother bobbins are premium quality plastic bobbins that can be reused many times, with a security notch for consistent bobbin thread winding. Keep spares in a storage box so they stay clean and easy to find.
How many bobbins come in a pack?
It depends on the pack. The Eoehro pack holds 50 bobbins with 2 storage boxes, the YEQIN pack holds 25 bobbins with a box, the UzecPk box holds 25 prewound bobbins, and the Brother pack holds 10 bobbins.
Do these bobbins fit embroidery machines?
The bobbins in this guide are made for sewing and embroidery machines that take Class 15 bobbins. The Brother bobbins are made for Brother sewing and embroidery machines, and the YEQIN bobbins list Brother and Singer sewing and embroidery machines.
Related: the embroidery machine bobbins and thread for embroidery machine picks. Also see the free arm vs flatbed sewing machine guide and the sewing and embroidery machines hub.




