Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Sewing Machine Replacement Parts: What to Buy

The replacement parts in this guide are presser feet, and the right one depends on your shank type and the job at hand.

Sewing Machine Replacement Parts: What to Buy
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Presser Foot Set 42Pcs, Sewing Machine PresserPresser Foot Set 42Pcs, Sewing Machine Presser9.7/10View on Amazon
  2. 2Fbshicung 13Pcs Presser Feet Set for HouseholdFbshicung 13Pcs Presser Feet Set for Household9.6/10View on Amazon
  3. 3Windman 3 Sizes Wide Rolled Hem Pressure FootWindman 3 Sizes Wide Rolled Hem Pressure Foot9.6/10View on Amazon
  4. 4SUYUN WELL 1/4 inch Snap On Foot w/Guide QuarterSUYUN WELL 1/4 inch Snap On Foot w/Guide Quarter9.5/10View on Amazon

The replacement parts in this guide are presser feet. A worn or missing foot shows up as skipped stitches, fabric that will not feed, or a wandering hem. The fix is usually a snap-on foot that matches the machine shank and the job at hand, and this guide walks through how to pick a foot, measure the shank, and fit it. The sets below cover the common replacement jobs, from a single quilting foot to a full kit.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Presser Foot Set 42Pcs, Sewing Machine Presser

Presser Foot Set 42Pcs, Sewing Machine Presser

XBA9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 42-piece presser foot kit with a manual and a storage case for overcast, zipper, overlock, quilting and button work on low-shank machines.

Pros

  • 42 feet cover overcast, zipper, overlock, quilting and button work
  • Manual identifies each foot and its use
  • Transparent case keeps the set stored together
  • 1 year warranty stated

Cons

  • Not suitable for vintage, mini, industrial or high-shank machines
  • Fits low-shank machines only, so check the shank
  • A buyer who needs just a quilting foot gets a full kit
  • The 7.4 by 4.9 inch case needs drawer space
Fbshicung 13Pcs Presser Feet Set for Household

Fbshicung 13Pcs Presser Feet Set for Household

Fbshicung9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece snap-on presser foot set with a narrow edge foot, an invisible zipper foot, a roller foot and a 1/4 inch quilting foot for low-shank machines.

Pros

  • 13 feet cover zippers, buttons, quilting, satin stitch and blind hems
  • Snap-on fitting needs no screwdriver
  • Suits leather, zippers, buttons and bead work
  • 3mm narrow edge foot for close stitching

Cons

  • Not suitable for vintage, mini, industrial or high-shank machines
  • Fits low-shank machines only
  • No warranty term is stated
  • No storage case is stated
Windman 3 Sizes Wide Rolled Hem Pressure Foot

Windman 3 Sizes Wide Rolled Hem Pressure Foot

Windman9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 3 wide rolled hem feet in 1/2 inch, 3/4 inch and 1 inch widths, with an adjustable screw for low-shank machines.

Pros

  • Hem widths of 1/2 inch, 3/4 inch and 1 inch
  • Rolled design folds the hem and grips the fabric
  • Adjustable screw sets the foot position
  • Handles thicker fabrics such as cotton or canvas

Cons

  • Hemming only; no zipper or button foot
  • Fits low-shank machines only
  • No warranty term is stated
  • Only 3 feet, so other jobs need another set
SUYUN WELL 1/4 inch Snap On Foot w/Guide Quarter

SUYUN WELL 1/4 inch Snap On Foot w/Guide Quarter

SUYUN WELL9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stainless steel 1/4 inch snap-on foot with an edge guide, reference markings on three sides and 6 sewing clips, for quilting and patchwork.

Pros

  • Edge guide sews a 1/4 inch seam every time
  • Reference markings on three sides for accuracy
  • Stainless steel resists rust and keeps a bright color
  • 6 sewing clips included

Cons

  • A single foot only; hems, zippers and buttons need other feet
  • Fits most household low-shank machines only
  • 1/4 inch only; other seam widths need other feet
  • No storage case is stated

Measure the shank before you order sewing machine replacement parts

The feet in this guide fit low-shank machines. To confirm the shank, measure the distance from the center of the thumb screw that holds the foot to the sewing board: a low shank measures 1/2 inch. The Windman set states this measure plainly. If the measure comes out taller, or the machine is a vintage, mini, industrial or high-shank model, the feet below do not fit. A labeled diagram helps: see the sewing machine parts labeled guide.

Match the foot to the job

A replacement part earns its place by the job it handles. A 1/4 inch foot with an edge guide sews patchwork seams, wide hem feet roll hems in 1/2 inch, 3/4 inch and 1 inch widths, and a multi-foot kit covers zippers, buttons, quilting and overlock work. The foot types guide walks through each shape and its use. Start from the job, then check the foot list.

The presser feet that cover the common jobs

Once the shank measures 1/2 inch, these sets cover the common replacement work: a single quilting foot, wide hem feet, and multi-foot kits.

Fit a snap-on foot

Snap-on feet press onto the shank holder and lift off the same way, with no screwdriver. The Fbshicung set states snap-on fitting with no screwdriver, and the SUYUN foot snaps on the same way. Seat the foot flat so the fabric stays in contact with the feed dogs, then sew a scrap seam to check the line. If the foot rocks, lift it off and seat it again.

When a part does not fit

A foot that does not fit usually shows it at once: it will not snap on, or it sits at an angle and the needle misses the opening. Check the shank measure again, then check the foot list for the machine brands named. Vintage, mini, industrial, high-shank and slant-shank machines take other feet. For cleaning and oiling around a swap, see the sewing machine maintenance guide; for feed trouble after a swap, see troubleshoot sewing machine problems.

FAQ: lasers and CNC

Do presser feet fit any sewing machine?

No. The feet in this guide fit low-shank machines such as Singer, Brother, Janome and Kenmore. Measure from the center of the thumb screw to the sewing board: a low shank measures 1/2 inch. Vintage, mini, industrial, high-shank and slant-shank machines need other feet.

What does a 1/4 inch foot do?

It sews a 1/4 inch seam for patchwork, quilting and piecing. The SUYUN foot adds an edge guide and reference markings on three sides, so the fabric edge rides against the guide.

How many feet does a starter set need?

A 13-piece set covers zippers, buttons, quilting, satin stitch and blind hems. A 42-piece kit adds overcast and overlock work for sewers who want a full box for every job.

Can I use these feet on a vintage machine?

No. The XBA and Fbshicung sets state they do not fit vintage, mini, industrial or high-shank machines. Check the fit list before ordering.

Does a presser foot set include instructions?

The XBA 42-piece kit includes a manual that identifies each foot and its use, and the Windman set points to instructions for the hem fold. Read the manual before hemming.

Related: the sewing machine parts and accessories guide, best sewing machine presser feet and best walking foot for quilting.

More buying guides

3D Printers ·

3D Printer Replacement Parts Guide

Worn nozzles cause stringing and uneven lines, and clogs cut flow; this guide shows when to swap them, what a kit should hold, and…

Sewing and Embroidery Machines ·

Parts of Sewing Machine Needle Explained

A sewing machine needle has a shank, shaft, groove, eye, point and scarf, and matching the size and point to the fabric keeps seams…

Sewing and Embroidery Machines ·

Bobbin Parts of a Sewing Machine Explained

The bobbin parts of a sewing machine are the bobbin, the bobbin case, the tension spring and the latch, and this guide explains what…