How to Set Up Sewing Machine Bobbin: Step by Step Guide
Learn how to wind, fit and thread a sewing machine bobbin so the first stitches come out even and smooth.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
BIDEX 25 Pcs Metal Sewing Machine Bobbins9.7/10View on Amazon - 2
LOKUNN 25 Pcs Bobbins Metal Bobbins for Sewing9.6/10View on Amazon - 3
HONEYSEW 20 Pack bobbins for Bernina Bobbins9.6/10View on Amazon - 4
72Pcs Professional Sewing Thread Kit 36 Colors9.6/10View on Amazon
How to set up sewing machine bobbin work comes down to a wound bobbin, a clean case and a thread path through the tension spring. Wind the bobbin in even layers, set it in the case, draw the thread through the tension spring and the delivery slot, then turn the handwheel so the needle catches the bobbin thread and lifts the loop up.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

BIDEX 25 Pcs Metal Sewing Machine Bobbins
A set of 25 metal Class 15 bobbins in a transparent storage box, for Singer, Brother, Kenmore, Bernina, Elna and Babylock machines.
Pros
- 25 metal bobbins in one set
- Smooth, rust-resistant metal resists tangling
- Fits Singer, Brother, Kenmore, Bernina, Elna and Babylock
- Transparent box keeps each bobbin in its own slot
Cons
- No warranty term is stated
- Sized for standard home machines only
- More bobbins than a light user needs
- Thread and needles need separate storage

LOKUNN 25 Pcs Bobbins Metal Bobbins for Sewing
A set of 25 Class 15 metal bobbins with a transparent storage box, listed as SA156 for most common home sewing machines.
Pros
- 25 Class 15 metal bobbins in one set
- Smooth, burr-free metal that will not scratch the thread
- 0.8 inch diameter and 0.45 inch height
- Transparent plastic box keeps bobbins organized
Cons
- The maker states no warranty
- Sized for Class 15 machines only
- No thread is included in the set
- Bobbins arrive empty and must be wound

HONEYSEW 20 Pack bobbins for Bernina Bobbins
A pack of 20 steel bobbins for Bernina machines, made to spin freely in the bobbin case.
Pros
- 20 steel bobbins in one pack for Bernina machines
- High quality steel spins freely in the bobbin case
- Listed fit names Bernina models including 120 and 1530, Activa 210 and B215
- Listed for Bernina bobbin 0115367000-B
Cons
- No warranty term is stated
- Bernina fit only, so other brands need a different bobbin
- 20 bobbins is a smaller set than the 25-piece sets here
- No storage box is included

72Pcs Professional Sewing Thread Kit 36 Colors
A 72-piece thread kit in 36 colors with prewound bobbins, 400 yards per spool, AAA-grade polyester.
Pros
- 36 colors with prewound bobbins
- 400 yards per spool, AAA-grade polyester
- 4-ply tight-twist build, by the maker
- OEKO-TEX and ISO certified stated
Cons
- Strength and friction claims are the maker's own figures
- No bobbin class is stated
- No warranty term is stated
Wind the bobbin
Place the thread spool on the spool pin and draw the thread through the winding guides to the bobbin winder, following the printed thread path. Push the bobbin onto the winder spindle and run the machine slowly. Stop winding before the thread reaches the rim, trim the tail close, and slip the bobbin off the spindle. See the how to wind a sewing machine bobbin guide for a closer look.
Fit the bobbin in the case
For a front-load machine, hold the case by the latch and set the bobbin inside so the thread unwinds in the direction shown on the case or in the manual. Draw the thread through the tension spring and out of the delivery slot, then slide the case into the shuttle until the latch clicks into place. For a drop-in machine, set the bobbin in the well, draw the thread through the slot and tension spring, and close the slide plate. The thread should pull out with light, steady resistance; if it runs free, the thread missed the tension spring.
Thread the needle and pull the bobbin thread up
Thread the machine from the spool through the guides and the take-up lever, then through the needle eye in the direction the manual shows, leaving a short tail behind the needle. Hold the needle thread loosely and turn the handwheel toward you through a full stitch cycle so the needle dips below the plate and catches the bobbin thread. Pull gently on the needle thread to lift the bobbin loop up.
Check the first stitches
Sew a scrap of the fabric planned for the project and look at each side of the seam. Even stitches with no loops on either side of the seam suggest the bobbin setup is right. Loops underneath usually mean the top thread missed a guide, so rethread the top path and check again. Loops on top usually point to the bobbin thread, so check that it sits in the tension spring. If the trouble stays, the bobbin problems on a sewing machine guide lists the common causes.
Which bobbin fits your machine
Bobbins differ by class and size, so match the bobbin to the machine before ordering spares. Class 15 is a common size for home machines, and the LOKUNN and BIDEX picks below are Class 15, with the LOKUNN set listed as SA156. The HONEYSEW pack below matches Bernina part 0115367000-B, so check the part number before ordering. For sizing, see the bobbin types for sewing machines guide and the sewing machine bobbin size chart.
Common mistakes to avoid
- Winding the bobbin in uneven layers that feed in jerks.
- Setting the bobbin in backwards.
- Skipping the tension spring.
- Pulling the bobbin thread up with the needle thread held too tight.
- Ordering spares without checking the bobbin class.
Bobbin gear for this setup
The picks below cover the parts of this setup that wear out: spare bobbins, a storage box, and a thread kit with prewound bobbins.
How to set up sewing machine bobbin: the short version
- Wind the bobbin in even layers.
- Set the bobbin in the case.
- Draw the thread through the tension spring.
- Thread the needle and pull the bobbin loop up.
- Sew a scrap and check the seam.
FAQ: lasers and CNC
What is a Class 15 bobbin?
A Class 15 bobbin is a standard bobbin size used in many home sewing machines. The LOKUNN and BIDEX picks in this guide are Class 15, and the LOKUNN set is listed as SA156.
Can any bobbin be used in a sewing machine?
No. Bobbins differ by class and size, and the wrong size can jam the case or spoil the stitch. Check the machine manual for the class it takes, and see are sewing machine bobbins universal for the full picture.
Why does thread bunch under the fabric?
Bunched thread underneath usually means the top thread missed a guide. Rethread the top path, seat the bobbin fully, and sew a scrap to check the stitch. If loops show on top instead, check that the bobbin thread sits in the tension spring.
What does a well wound bobbin look like?
A well wound bobbin has smooth, even layers of thread with no lumps or loose loops, and the thread stops short of the bobbin rim. Uneven winding feeds in jerks and shows in the stitch.
Is a storage box needed for bobbins?
A box is not required, but it keeps wound bobbins clean, sorted and ready. The LOKUNN and BIDEX sets include a transparent storage box, while the HONEYSEW set is bobbins only.
Related: the sewing and embroidery machine hub, how to wind a sewing machine bobbin and bobbins for Brother sewing machines.




