Best White PLA Filament 1.75mm (2026): 5 Picks for FDM Printers
Five white PLA filaments 1.75mm, from 1KG to 4KG, compared by accuracy, print speed, stated settings, pack size and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU PLA White 4KG9.8/10View on Amazon - 2
Best 2-PackCreality PLA White 2KG9.6/10View on Amazon - 3
Best for SpeedSUNLU PLA+ 2.0 White9.6/10View on Amazon - 4
Best Matte FinishELEGOO Matte PLA White9.6/10View on Amazon
White filament is the workhorse spool on a maker’s shelf: a plain white print shows every layer, so the spool has to feed straight and hold its diameter. This guide compares the best white PLA filament 1.75mm picks for FDM printers, from 1KG single spools to 4KG packs, on the figures each listing actually publishes: diameter accuracy, stated print settings, pack size and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU PLA White 4KG: 4KG across 4 spools, ±0.02mm accuracy, stated nozzle and bed settings, and a 1 year warranty. Check price on Amazon
- Best 2-Pack Creality PLA White 2KG: Two 1KG spools, ±0.02mm accuracy, dried 24 hours and vacuum-sealed, with a 1 year warranty. Check price on Amazon
- Best for Speed SUNLU PLA+ 2.0 White: PLA+ 2.0 rated up to 300mm/s, tougher and stronger than standard PLA+, with ±0.02mm accuracy. Check price on Amazon
- Best Matte Finish ELEGOO Matte PLA White: A matte finish with nearly invisible layer lines, in a 4KG pack of 4 spools. Check price on Amazon
Machines on the list

SUNLU PLA 3D Printer Filament, White, 4KG
A 4KG pack of four 1KG white PLA spools with ±0.02mm accuracy, stated nozzle and bed settings, and a 1 year warranty.
Pros
- 4KG across four 1KG spools, vacuum packed
- ±0.02mm accuracy for 1.75mm FDM printers
- Nozzle 200-230°C and bed 50-65°C stated, with 50-100mm/s print speed
- Neat winding the maker rates at a 100% neat rate
Cons
- No print speed above 100mm/s stated
- Four separate spools to store instead of one large spool
- Spool size suits a lot of FDM printers, not every printer
- All four spools are white, so a second color needs another pack

Creality PLA 3D Printer Filament, White & White
A 2KG pack of two 1KG white PLA spools with ±0.02mm accuracy, dried 24 hours and vacuum-sealed, with a 1 year warranty.
Pros
- Two 1KG spools for 2KG total
- ±0.02mm accuracy on 1.75mm filament
- Dried 24 hours and vacuum-sealed with a desiccant
- 1 year warranty stated
Cons
- No nozzle, bed or print speed stated in the listing
- White only; the listing names no other color in this pack
- No stated nozzle or bed temperature to start from

SUNLU PLA+2.0 3D Printer Filament, White, 1KG
A tougher 1KG white PLA+ 2.0 spool with ±0.02mm accuracy, print speeds up to 300mm/s, and stated nozzle and bed settings.
Pros
- Print speeds up to 300mm/s
- More resistant to brittleness and cracking than standard PLA+
- ±0.02mm accuracy for 1.75mm FDM printers
- Nozzle 205-220°C and bed 50-60°C stated, with 100-300mm/s print speed
Cons
- One 1KG spool only; a second spool needs another purchase
- 30-Day warranty, while the SUNLU PLA and Creality packs state 1 year
- A single 1KG spool runs out sooner than the 2KG and 4KG packs here
- The listing calls it tougher and stronger, but states no strength figure

ELEGOO PLA 3D Printer Filament 1.75mm White 2KG
A 2KG pack of two 1KG white PLA spools on cardboard spools, with ±0.02mm accuracy, a glossy finish, and a 30 day guarantee.
Pros
- Two 1KG spools for 2KG total
- ±0.02mm accuracy on 1.75mm filament
- Glossy surface finish with low warp and shrinkage
- Cardboard spools with a larger inner diameter for easy feeding
Cons
- No nozzle, bed or print speed stated in the listing
- Warranty covers quality reasons for 30 days, while the SUNLU PLA and Creality packs state 1 year
- Two 1KG spools; a bigger pack needs the 4KG picks
- Glossy finish only; a matte look needs the ELEGOO Matte pick

ELEGOO Matte PLA 3D Printer Filament 1.75mm White
A 4KG pack of four 1KG white matte PLA spools with a low-gloss finish and nearly invisible layer lines, and no warranty term stated.
Pros
- 4KG across four 1KG spools
- Matte finish with low gloss and a smooth texture
- Nearly invisible layer lines, per the listing
- Neat winding to prevent tangling and feeding interruptions
Cons
- No warranty term in the listing
- No accuracy figure stated, only high precision
- No nozzle, bed or print speed stated in the listing
- Matte finish only; a glossy look needs another spool
Specs compared
| Model | HQ Score | Pack | Diameter | Accuracy | Print speed | Warranty |
|---|---|---|---|---|---|---|
| SUNLU PLA White 4KG | 9.8/10 | 4KG, 4 spools | 1.75mm | ±0.02mm | 50-100mm/s | 1 year |
| Creality PLA White 2KG | 9.6/10 | 2KG, 2 spools | 1.75mm | ±0.02mm | Not stated | 1 year warranty |
| SUNLU PLA+ 2.0 White | 9.6/10 | 1KG, 1 spool | 1.75mm | ±0.02mm | 100-300mm/s | 30-Day |
| ELEGOO PLA White 2KG | 9.6/10 | 2KG, 2 spools | 1.75mm | ±0.02mm | Not stated | 30 day guarantee |
| ELEGOO Matte PLA White | 9.6/10 | 4KG, 4 spools | 1.75mm | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Diameter is the filament diameter, and accuracy is the maker’s stated tolerance.
What the listings tell you, and what they leave out
We read five listings for this guide. Four of the five stated a warranty term, and four of the five stated a ±0.02mm accuracy figure. Only two of the five stated print speeds, and only two stated nozzle and bed temperatures. The ELEGOO Matte listing states neither a tolerance figure nor a warranty term, so it carries the lowest warranty score here.
One listing contradicts itself: the Creality title says 2-pack, but its spec table says NumberOfItems 1. The title and bullets describe two 1KG spools, so this guide follows the title and bullets over the spec table. The SUNLU PLA pack is the only one that states spool dimensions in inches, at 8.00 in diameter, 2.50 in wide, with a 2.20 in hub hole.
Buying guide: best white PLA filament 1.75mm for FDM printers
Diameter and accuracy
Four of the five listings state 1.75mm diameter with ±0.02mm accuracy, which is the figure that decides whether a spool feeds smoothly through a 1.75mm printer. The ELEGOO Matte listing states a consistent 1.75mm diameter but no tolerance figure, so its accuracy is not stated. When a listing states no tolerance, the diameter figure alone does not say how steady the feed will be.
Nozzle and bed settings
Only the two SUNLU listings state nozzle and bed temperatures. SUNLU PLA lists a nozzle temperature of 200-230°C and a bed temperature of 50-65°C, while SUNLU PLA+ 2.0 lists 205-220°C at the nozzle and 50-60°C at the bed. The other three listings state no temperatures, so their settings come from the printer or the slicer profile, not from the listing.
Print speed
Print speed is a rated figure, not a measured result. SUNLU PLA+ 2.0 lists print speeds up to 300mm/s, and its recommended range is 100-300mm/s. SUNLU PLA lists 50-100mm/s. The other three listings state no print speed, so speed does not separate them.
Pack size and storage
Two picks come as 4KG packs of four 1KG spools, two come as 2KG packs of two 1KG spools, and one is a single 1KG spool. A bigger pack means fewer spool changes across a run of prints. For storage, the Creality listing states its filament is dried 24 hours and vacuum-sealed with a desiccant, and the SUNLU and ELEGOO listings state vacuum-sealed packs.
Matte or glossy finish
Finish changes how a print looks, not how it feeds. The ELEGOO Matte listing states a matte appearance with low gloss and a smooth texture, with nearly invisible layer lines. The ELEGOO PLA listing states a glossy surface finish. The other three listings state no finish.
Project Match
Match the spool to the project, using only what each listing states:
- High-precision models, functional parts and decorative items: SUNLU PLA+ 2.0, which the listing names for those uses and rates up to 300mm/s.
- Prints where layer lines should stay out of sight: ELEGOO Matte PLA, with its matte finish and nearly invisible layer lines.
- Everyday prints and first spools: SUNLU PLA or Creality PLA, both with ±0.02mm accuracy and a 1 year warranty.
- Glossy display prints: ELEGOO PLA, which states a glossy surface finish.
- Long runs without a spool change: the 4KG SUNLU PLA or ELEGOO Matte packs.
Not stated: which spool suits food-contact prints or outdoor use, since no listing states either.
How the scores add up
Each spool is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. Safety scores stay at zero here because none of the five listings states a safety certification for the filament.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU PLA White 4KG | 9.8 | 30 | 22 | 22 | n/a | 4 |
| Creality PLA White 2KG | 9.6 | 28 | 21 | 20 | n/a | 4 |
| SUNLU PLA+ 2.0 White | 9.6 | 32 | 22 | 18 | n/a | 2 |
| ELEGOO PLA White 2KG | 9.6 | 28 | 20 | 20 | n/a | 2 |
| ELEGOO Matte PLA White | 9.6 | 27 | 20 | 21 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What nozzle temperature should I use for white PLA filament?
SUNLU PLA lists a nozzle temperature of 200-230°C, and SUNLU PLA+ 2.0 lists 205-220°C. The other three listings in this guide state no nozzle temperature, so for those spools the setting comes from the printer or the slicer profile rather than the listing.
How do I keep white PLA filament dry?
Keep the spool in its sealed pack until use. The Creality listing states its filament is dried 24 hours and vacuum-sealed with a desiccant, and the SUNLU and ELEGOO listings state vacuum-sealed packs. See our how to dry filament guide for drying methods and tools.
What is the difference between PLA and PLA+ 2.0?
SUNLU PLA+ 2.0 is more resistant to brittleness and cracking than standard PLA+, and it prints at up to 300mm/s against 50-100mm/s for SUNLU PLA. Both state ±0.02mm accuracy and 1.75mm diameter. PLA+ 2.0 comes as a single 1KG spool with a 30-Day warranty, while SUNLU PLA comes as a 4KG pack with a 1 year warranty.
What is PLA filament made of?
Creality states its PLA is made from renewable plant-based materials, and ELEGOO describes PLA as a commonly used thermoplastic material. The other listings in this guide state no material source, so the plant-based statement belongs to the Creality listing alone.
Related: the 3D printers hub, best wood PLA filament, best PLA plus filament, how to dry filament, and 3D printer filament types. Also see our best 3D PLA filament.




