Best Pla Plus Filament (2026): 5 Picks for Makers
Five 1.75 mm PLA+ filament bundles, from 1 kg to 10 kg, compared on print speed, dimensional accuracy, colors and what each listing states about settings and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU PLA+ 2.0 8-Color9.6/10View on Amazon - 2
Best Big BundleUJOY3D Elite PLA+ 10kg9.6/10View on Amazon - 3
Best 4kg BundleSUNLU PLA Plus 4kg9.5/10View on Amazon
A shelf of half-used spools is the sign of a maker who prints in color: a black spool for brackets, a red one for ornaments, a silver silk for the piece that sits on the desk. PLA+ is the filament those makers reach for when standard PLA feels too brittle for the job, and this guide compares the best pla plus filament bundles on what each listing actually states: bundle size, colors, print speed, accuracy and settings.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU PLA+ 2.0 8-Color: 8 colors in 250 g spools, +/- 0.02 mm accuracy, speeds up to 300 mm/s, and the only stated warranty here. Check price on Amazon
- Best Big Bundle UJOY3D Elite PLA+ 10kg: 10 kg in 10 one-kilo spools and 10 colors, with a 200-400 mm/s speed range and vacuum sealed packaging. Check price on Amazon
- Best 4kg Bundle SUNLU PLA Plus 4kg: 4 kg in 4 one-kilo spools in 4 earth-tone colors, neatly wound, for most FDM 3D printers. Check price on Amazon
Machines on the list

SUNLU Silk PLA+ Filament 1.75mm
A Silver Silk PLA+ filament with a chrome-like gloss, satin-like finish, stated print settings, and a reusable spool.
Pros
- Glossy, satin-like finish straight from the printer, with no post-processing needed
- Tolerance of +/- 0.02mm with clog-free, stable extrusion
- Stated settings: nozzle 205-215°C, bed 60-80°C, speed 30-60mm/s
- Reusable spool for refills, compatible with Bambu Lab, ELEGOO and MarsWork refill filament
Cons
- Brand header names YOOPAI, while the title and bullets name SUNLU
- Warranty: Not stated
- Silver is the only color stated for this listing

SUNLU PLA+2.0 3D Printer Filament
An 8-color PLA+ 2.0 bundle of 250 g spools, 2 kg in total, rated for print speeds up to 300 mm/s with a dimensional accuracy of +/- 0.02 mm.
Pros
- 8 colors in 250 g spools, 2 kg in total, for multicolor prints
- Rated for print speeds up to 300 mm/s
- Dimensional accuracy of +/- 0.02 mm, for 1.75 mm FDM printers
- Neatly wound spools with vacuum packaging to keep filament dry
Cons
- Only 2 kg in total, the smallest bundle here
- 250 g spools suit sampling colors, not long single-color prints
- Only a 30-Day warranty is stated
- Top speed of 300 mm/s is below the 400 mm/s top speed of the UJOY3D pick

UJOY3D 10kg Elite PLA+ 3D Printer Filament Bundle
A 10 kg Elite PLA+ bundle of 10 one-kilo spools in 10 colors, rated for print speeds of 200-400 mm/s with an accuracy of +/- 0.03 mm.
Pros
- 10 kg bundle: 10 one-kilo spools in 10 colors
- Print speed range of 200-400 mm/s, the highest speed range here
- 100% virgin raw material with vacuum sealed packaging and desiccant
- Nozzle 205-220°C and bed 55-65°C settings stated, with 210°C for the first layer
Cons
- No warranty term is stated
- Accuracy of +/- 0.03 mm is looser than the +/- 0.02 mm of the SUNLU picks
- No spool dimensions are stated
- 10 kg in 10 colors suits multicolor work, not bulk single-color printing

SUNLU 3D Printer Filament PLA Plus 1.75mm
A 4 kg PLA Plus bundle of 4 one-kilo spools in Bone White, Olive Green, Coffee Brown and Oak, neatly wound for most FDM 3D printers.
Pros
- 4 kg bundle: 4 one-kilo spools
- 4 colors: Bone White, Olive Green, Coffee Brown and Oak
- Neatly wound, per the title
- 1.75 mm, for most FDM 3D printers
Cons
- No bullets: no speed, accuracy or print settings stated
- No warranty term is stated
- No stated nozzle or bed temperature
- Colors are fixed to the 4 earth tones in the bundle

ELEGOO PLA+ 3D Printer Filament 1.75mm Black 4KG
A 4 kg black PLA+ bundle of 4 spools of 1kg, with vacuum-sealed, dried filament and a glossy surface.
Pros
- PLA Plus toughness over standard PLA, per the listing
- Vacuum sealed after complete drying
- Glossy surface with low warp and shrinkage
- Fits Neptune, P1P, P1S, Ender and Kobra series
Cons
- No warranty term is stated
- No print speed is stated
- Black only, so no color choice
- 4 kg total, less than the 10 kg and 16 kg packs
Other machines to compare
SUNLU PLA+2.0 3D Printer FilamentCheck price on Amazon
SUNLU PLA Plus Filament 1.75mm Black 1KGCheck price on Amazon
SUNLU 3D Printer Filament PLA Plus 1.75mm Black 4KGCheck price on Amazon
SUNLU PLA Plus Filament 1.75mm White 1KGCheck price on Amazon
ELEGOO PLA Plus 3D Printer Filament 1.75mm White 1KGCheck price on Amazon
Best pla plus filament compared
| Filament | HQ Score | Diameter | Bundle | Colors | Rated speed | Accuracy | Warranty |
|---|---|---|---|---|---|---|---|
| SUNLU PLA+ 2.0 8-Color | 9.6/10 | 1.75 mm | 2 kg, 8 x 250 g | 8 | Up to 300 mm/s | +/- 0.02 mm | 30-Day |
| UJOY3D Elite PLA+ 10kg | 9.6/10 | 1.75 mm | 10 kg, 10 x 1 kg | 10 | 200-400 mm/s | +/- 0.03 mm | Not stated |
| SUNLU PLA Plus 4kg | 9.5/10 | 1.75 mm | 4 kg, 4 x 1 kg | 4 | Not stated | Not stated | Not stated |
| ELEGOO PLA+ Black 4kg | 9.5/10 | 1.75 mm | 4 kg, 4 x 1 kg | 1 | Not stated | +/- 0.02 mm | Not stated |
| SUNLU Silk PLA+ Silver | 9.7/10 | 1.75 mm | 1 kg | 1 | Not stated | Not stated | Not stated |
Specifications are manufacturer stated, as published on each listing and collected 3 November 2026. Speeds are the rated print speeds each listing states.
What the listings tell you, and what they leave out
We read 5 PLA+ filament listings for this guide. Two state a print speed range, three state a dimensional accuracy, and two state nozzle and bed temperatures. Only one states a warranty term, the 30-Day term on the SUNLU PLA+ 2.0 bundle, and none state a safety certification. Two picks are title-only listings with no bullets at all, so their cards rest on the title alone.
Buying guide: choosing PLA+ filament
PLA+ vs standard PLA
Both listings that compare the two say the same thing: PLA+ resists brittleness and cracking better than standard PLA, with upgraded durability. SUNLU’s PLA+ 2.0 listing says it is more resistant to brittleness and cracking than standard PLA+, and UJOY3D says its Elite PLA+ has upgraded durability over regular PLA. If your prints snap at thin walls, PLA+ is the listing’s answer, not a different material.
Speed and accuracy
The two listings that state speeds give ranges, not single figures: SUNLU PLA+ 2.0 recommends 100-300 mm/s with speeds up to 300 mm/s, and UJOY3D gives 200-400 mm/s. Accuracy is stated as +/- 0.02 mm on the SUNLU PLA+ 2.0 and ELEGOO listings and +/- 0.03 mm on the UJOY3D listing. A tighter accuracy figure suits high-precision models, which the SUNLU listing names as a use.
Bundle size and colors
Bundles here run from 1 kg to 10 kg: a single 1 kg silver spool, 2 kg in 8 small spools, 4 kg in 4 one-kilo spools, and 10 kg in 10 one-kilo spools. Small spools suit sampling colors; one-kilo spools suit long prints in one color. The SUNLU PLA+ 2.0 bundle holds 8 colors, the UJOY3D bundle 10, the SUNLU 4 kg bundle 4 earth tones, and the ELEGOO and silk picks are single-color.
Print settings
Two listings state settings. SUNLU PLA+ 2.0 recommends a nozzle temperature of 205-220°C and a bed temperature of 50-60°C. UJOY3D recommends a nozzle temperature of 205-220°C, with 210°C for the first layer, and a bed temperature of 55-65°C. The other three listings state no temperatures, so start with the settings your printer maker recommends for PLA+ and adjust from there.
Storage
PLA+ filament stays dry in vacuum sealed packaging: the SUNLU PLA+ 2.0 listing says its spools are sealed in airtight vacuum packaging to stay moisture-free, and the UJOY3D listing says each spool is vacuum sealed with desiccant. Keep spools sealed until use.
Project Match
- Multicolor models and ornaments: the SUNLU PLA+ 2.0 bundle with 8 colors, or the UJOY3D bundle with 10 colors.
- Functional parts: the UJOY3D Elite PLA+, which the listing names for functional parts, or the ELEGOO PLA+, listed as High Toughness.
- Display prints with a silk finish: the silver Silk PLA+ spool, with its chrome-like gloss finish.
- Big multi-spool stock: the UJOY3D 10 kg bundle, 10 one-kilo spools in 10 colors.
- Earth-tone prints: the SUNLU 4 kg bundle in Bone White, Olive Green, Coffee Brown and Oak.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, which is why the two title-only picks score lowest.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU PLA+ 2.0 8-Color | 9.6 | 30 | 21 | 20 | n/a | 1 |
| UJOY3D Elite PLA+ 10kg | 9.6 | 32 | 21 | 21 | n/a | 0 |
| SUNLU PLA Plus 4kg | 9.5 | 26 | 19 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
What is PLA+ filament?
PLA+ is a tougher variant of PLA. The SUNLU listing says its PLA+ 2.0 is more resistant to brittleness and cracking than standard PLA+, and UJOY3D says its Elite PLA+ has upgraded durability over regular PLA. The UJOY3D listing describes its filament as made from refined corn-based raw materials.
What nozzle and bed temperatures do these filaments need?
The two listings that state settings agree on the nozzle: 205-220°C. SUNLU PLA+ 2.0 recommends a bed temperature of 50-60°C, and UJOY3D recommends 55-65°C, with 210°C for the first layer. The other three listings state no temperatures.
How fast can I print with PLA+?
It depends on the listing. SUNLU PLA+ 2.0 recommends a print speed of 100-300 mm/s, with speeds up to 300 mm/s, and UJOY3D gives a print speed range of 200-400 mm/s. The other three listings state no speed.
What does 1.75 mm mean?
It is the filament diameter, and all five picks are 1.75 mm for FDM 3D printers. The SUNLU PLA+ 2.0 listing says its filament is compatible with nearly all 1.75 mm FDM 3D printers.
How should I store PLA+ filament?
Sealed and dry. The SUNLU PLA+ 2.0 listing says its filament is sealed in airtight vacuum packaging to stay moisture-free, and the UJOY3D listing says each spool is vacuum sealed with desiccant. Keep spools sealed until you print with them.
Related: the 3D printers hub, the silk PLA filament guide, matte PLA vs PLA Plus, and the value PLA filament picks. Also see our multicolor 3D printer filament and spray paint for 3D prints.




