1.75mm vs 2.85mm Filament: Which One Should You Buy?
A head-to-head look at filament diameter, with PLA listings on both sides and an ABS listing on the 2.85mm side.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG9.6/10View on Amazon - 2
SUNLU PLA Plus 3D Printer Filament, 1.75mm9.6/10View on Amazon - 3
Gizmo Dorks 3mm (2.85mm) ABS 3D Printer Filament9.6/10View on Amazon - 4
Gizmo Dorks 3mm (2.85mm) PLA 3D Printer Filament9.6/10View on Amazon
A maker lining up a print for a shop order faces a quiet choice before the opening layer goes down: the diameter of filament the printer expects. Pick a diameter the printer is not built for and no listing here offers a fit: each listing states the diameter its printers accept, so match the filament to the printer the listing names. That choice is the subject of this comparison of 1.75mm vs 2.85mm filament, with PLA listings on both sides and an ABS listing on the 2.85mm side.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the diameter your printer is built to feed, then pick the material. The 1.75mm listings name most common 1.75mm FDM printers, while the 2.85mm listings name LulzBot, Ultimaker and Airwolf 3D printers. PLA suits easy printing, and ABS suits tougher functional parts where the listing states that strength.
Machines on the list

ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG
A black PLA filament on a 1kg spool, with a stated +/- 0.02mm tolerance, neat winding and vacuum-sealed packaging.
Pros
- Stated +/- 0.02mm tolerance for smoother, more stable printing
- Vacuum-sealed packaging to protect the filament from moisture
- Neat winding with a larger spool inner diameter for easy feeding
- Glossy surface finish with low warp and shrinkage, per the listing
Cons
- Cover lasts only 30 days for quality reasons
- Black is the color stated in this listing
- No nozzle or bed temperature figures stated
- 1kg spool only in this listing

SUNLU PLA Plus 3D Printer Filament, 1.75mm
A 10-roll PLA Plus bundle in 1kg spools, with a stated +/- 0.02mm tolerance, a stated color set and a stated temperature range.
Pros
- 10 rolls of 1kg for multiple color needs
- Stated +/- 0.02mm tolerance with neatly wound spools
- Maker claims PLA Plus is 10 times stronger than PLA filament
- Stated nozzle range of 210°C - 235°C and bed range of 55°C - 65°C
Cons
- No warranty term is stated
- Color set is fixed across the 10 rolls
- 10-roll bundle is a large commitment for a maker who prints in few colors
- Strength claim is the maker claim, with no standard named

Gizmo Dorks 3mm (2.85mm) ABS 3D Printer Filament
A black ABS filament on a 1kg spool for 2.85mm printers, with a stated +/- 0.02mm tolerance and acetone smoothing support.
Pros
- High structural strength and superior impact resistance, per the listing
- Acetone vapor smoothing for a glossy, seamless finish
- Stated +/- 0.02mm tolerance for smooth, clog-free feeding
- Compatibility with 2.85mm and 3mm FDM printers, including LulzBot, Ultimaker and Airwolf 3D printers
Cons
- No warranty term is stated
- No nozzle or bed temperature figures stated
- Black is the color stated in this listing
- Elevated temperature tolerance is stated without a figure

Gizmo Dorks 3mm (2.85mm) PLA 3D Printer Filament
A white PLA filament on a 1kg spool for 2.85mm printers, with a stated +/- 0.02mm tolerance and bed adhesion without a heated chamber.
Pros
- Plant-derived PLA with minimal warping and odorless printing
- Bed adhesion without requiring a heated chamber
- Stated +/- 0.02mm tolerance with neat winding to prevent tangles
- Sharp corner detail and smooth finishes for display models
Cons
- No warranty term is stated
- No nozzle or bed temperature figures stated
- White is the color stated in this listing
- Stated strengths lean toward display work, not functional strength
1.75mm vs 2.85mm filament: diameter decides
| Spec | ELEGOO PLA 1.75mm | SUNLU PLA Plus 1.75mm | Gizmo ABS 2.85mm | Gizmo PLA 2.85mm |
|---|---|---|---|---|
| HQ Score | 61 | 60 | 58 | 57 |
| Diameter | 1.75mm | 1.75mm | 2.85mm | 2.85mm |
| Material | PLA | PLA Plus | ABS | PLA |
| Spool | 1kg | 10 rolls of 1kg | 1kg | 1kg |
| Tolerance | +/- 0.02mm | +/- 0.02mm | +/- 0.02mm | +/- 0.02mm |
| Nozzle temperature | Not stated | 210°C – 235°C | Not stated | Not stated |
| Bed temperature | Not stated | 55°C – 65°C | Not stated | Not stated |
| Warranty | 30 days of cover for quality reasons | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 4 November 2026.
What separates the two sides
Diameter is the first compatibility check: each listing states the diameter its printers accept. The ELEGOO example states compatibility with most common 1.75mm FDM printers. The SUNLU example states wide compatibility with 1.75mm FDM printers. The Gizmo examples state compatibility across 2.85mm and 3mm FDM printers.
Tolerance does not separate the sides: each listing states a +/- 0.02mm tolerance. Spool size separates the SUNLU example from the rest: the SUNLU example offers 10 rolls of 1kg, while the ELEGOO example and each Gizmo example offer a 1kg spool.
Materials: PLA, PLA Plus and ABS
The ELEGOO example is a PLA filament with low warp and shrinkage, a glossy surface finish and odorless printing, per its listing.
The SUNLU example is a PLA Plus filament, and its maker claims PLA Plus is 10 times stronger than PLA filament, with brighter color and better layer adhesion.
The Gizmo PLA example is a PLA filament derived from renewable plant resources, with minimal warping, odorless printing and bed adhesion without a heated chamber.
The Gizmo ABS example lists high structural strength, superior impact resistance and elevated temperature tolerance over standard PLA, and its listing states compatibility with acetone vapor smoothing for a glossy, seamless finish.
Spool size and feeding
The ELEGOO example, the SUNLU example and the Gizmo PLA example each state neat winding or less tangling in their listings. The Gizmo ABS example does not state a winding claim; it states reliable dimensional accuracy and roundness to prevent jam-ups.
Only the SUNLU example states spool diameter, width and hub hole figures. The SUNLU example states a spool diameter of 8.00 inches, a spool width of 2.50 inches and a hub hole diameter of 2.20 inches. The Gizmo examples state product dimensions of 8.5 inches x 8.5 inches x 3.0 inches.
Only the SUNLU example states printing temperatures: a nozzle range of 210°C – 235°C and a bed range of 55°C – 65°C. The other listings state no nozzle or bed temperature figures.
Choose 1.75mm filament if
- Your printer is a 1.75mm FDM printer.
- You want color choice: the SUNLU example offers 10 rolls in a stated color set.
- You want PLA ease of use: the ELEGOO example states low warp and shrinkage with a glossy finish.
Choose 2.85mm filament if
- Your printer is a 2.85mm or 3mm FDM printer.
- You want ABS for functional modeling, as listed for the Gizmo ABS example.
- You want PLA without a heated chamber: the Gizmo PLA example states bed adhesion without requiring a heated chamber.
Project Match
- Display models and architectural scale designs: the Gizmo PLA example, which lists both uses.
- Everyday prototyping: the Gizmo PLA example and the Gizmo ABS example, which each list everyday prototyping.
- Multiple color needs: the SUNLU example, which offers 10 rolls for customers with multiple color needs.
- Functional modeling: the Gizmo ABS example.
FAQ: lasers and CNC
Can a 1.75mm printer use 2.85mm filament?
No listing here states that fit. The ELEGOO example and the SUNLU example state compatibility with 1.75mm FDM printers. The Gizmo examples state compatibility with 2.85mm and 3mm FDM printers, so match the diameter to the printer.
Is PLA Plus stronger than PLA?
The SUNLU listing claims PLA Plus is 10 times stronger than PLA filament. No other listing here states a strength comparison, so treat the figure as the maker claim.
Does the ABS example need a heated chamber?
Not stated. The Gizmo ABS listing states no chamber guidance. The Gizmo PLA listing, by contrast, states bed adhesion without requiring a heated chamber.
Which example is described as easy to use?
The ELEGOO example states ease of use, low warp and shrinkage, and odorless printing. The SUNLU example states easy use with clog, bubble, tangle, warping and stringing free printing, per its listing.
What spool sizes do these listings offer?
The ELEGOO example offers a 1kg spool. The SUNLU example offers 10 rolls of 1kg. Each Gizmo example offers a 1kg spool.
Related: PLA vs ABS filament, PLA vs PLA Plus filament, best PLA filament for 3D printers.




