Best UV Resin for Crafts (2026)
Five UV resins and kits for crafts compared by size, lamp, hardening time, hardness and warranty, from a 30g bonding kit to 300g of hard resin.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLET’S RESIN 200g Kit9.6/10View on Amazon - 2
Best 300g ResinYIEHO 300g Resin9.5/10View on Amazon - 3
Best Resin OnlyKISREL 300g Resin9.5/10View on Amazon - 4
Best BondingLET’S RESIN Bond 30g9.4/10View on Amazon
A pair of earrings starts as a drop of clear resin in a small mold, and the finish depends on the resin hardening smooth and clear under the lamp. The best uv resin for crafts hardens hard and clear with little odor, so jewelry, keychains and small castings come out glossy and ready to wear. This guide compares resins and kits by size, lamp, hardening time, hardness and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall LET’S RESIN 200g Kit: A 200g starter kit with an 8-bead lamp, 3 timing settings, low shrinkage and a 90-day warranty. Check price on Amazon
- Best 300g Resin YIEHO 300g Resin: 300g of crystal clear hard resin with low odor, less bubble and REACH compliance. Check price on Amazon
- Best Resin Only KISREL 300g Resin: 300g of hard resin that hardens in 1 to 3 minutes under a 36W UV lamp, low odor and non-yellowing. Check price on Amazon
- Best Bonding LET’S RESIN Bond 30g: 30g of bonding resin with a flashlight that hardens in 5 to 10 seconds, for glass, metal and plastic. Check price on Amazon
Machines on the list

LET'S RESIN UV Resin with Light
A 200g starter kit with an 8-bead UV lamp, 3 timing settings, mixing tools and a silicone mat, with shrinkage below 2% and hardness up to 85D.
Pros
- 8-bead lamp with 2-min, 3-min and 5-min timing settings
- Shrinkage below 2% and hardness up to 85D
- Viscosity of 2000cps for bonding glass and crystal crafts
- 90-day manufacture warranty from the date of purchase
Cons
- No hardening time in minutes is stated
- 200g is less resin than the 300g bottles
- No lamp power in watts is stated
- One claim about the refractive index is worded unclearly

YIEHO 300g UV Resin Glue Crystal Clear
300g of crystal clear hard UV resin with low odor, less bubble and a defoaming formula, meeting REACH requirements with a Safety Data Sheet.
Pros
- 300g bottle for larger work and more pieces
- Meets REACH requirements, with a Safety Data Sheet
- Low odor and less bubble with a defoaming formula
- Crystal clear and super hard after hardening
Cons
- No lamp is included
- No hardening time is stated
- No warranty term is stated
- No hardness figure is stated

KISREL UV Resin 300g, Hard Type UV Resin Kit
300g of hard UV resin in polyurethane acrylic resin, crystal clear and non-yellowing, hardening in 1 to 3 minutes under a 36W UV lamp.
Pros
- 300g bottle for larger work and more pieces
- Hardens in 1 to 3 minutes under a 36W UV lamp
- Self-leveling and self-degassing, low odor
- Mixes with mica powder, colorants, glitter and sequins
Cons
- No lamp is included
- No warranty term is stated
- No hardness figure is stated
- No shrinkage figure is stated

KISREL UV Resin Kit with Light
A 200g kit with an 8-bead 12W UV lamp, a silicone pad, nitrile gloves and a manual, hardening in 1 to 3 minutes with a USB-C cable.
Pros
- 8-bead lamp, 12W, hardens in 1 to 3 minutes
- Silicone pad, nitrile gloves and manual included
- USB-C cable for power
- Low odor, low shrinkage, resistant to yellowing
Cons
- No power adapter is included; needs a DC 5V/2A adapter
- No warranty is stated (listed as No)
- No hardness figure is stated
- 200g is less resin than the 300g bottles

LET'S RESIN UV Resin Kit with Light
A 30g bonding resin with a UV flashlight that hardens in 5 to 10 seconds, for bonding glass, metal and plastic in jewelry and craft repair.
Pros
- Hardens in 5 to 10 seconds under the UV flashlight
- Bonds glass, metal and plastic
- Stays liquid until the flashlight hardens it, so the work can be shaped
- 90-day manufacture warranty from the date of purchase
Cons
- 30g is the smallest size here
- No hardness figure is stated
- Needs at least one transparent object for better hardening
- No lamp power in watts is stated
Other machines to compare
Resiners UV Resin 100gCheck price on Amazon
OSBANG Crystal Clear Hard UV ResinCheck price on Amazon
LEOBRO Silicone Mat for Resin MoldsCheck price on Amazon
HeyClear 3D Skull Resin Molds SiliconeCheck price on Amazon
LET'S RESIN UV Resin LightCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Lamp | Hardening time | Hardness | Warranty | Weight |
|---|---|---|---|---|---|---|---|
| LET’S RESIN 200g Kit | 9.6/10 | 200g | 8 beads, 3 timers | Not stated (2, 3, 5 min timers) | 85D | 90 days | 1.12 lb |
| YIEHO 300g Resin | 9.5/10 | 300g | Not included | Not stated | Not stated | Not stated | 0.73 lb |
| KISREL 300g Resin | 9.5/10 | 300g | Not included | 1-3 min (36W lamp) | Not stated | Not stated | Not stated |
| KISREL 200g Kit | 9.5/10 | 200g | 8 beads, 12W | 1-3 min | Not stated | Not stated | 0.93 lb |
| LET’S RESIN Bond 30g | 9.4/10 | 30g | Flashlight | 5-10 seconds | Not stated | 90 days | 0.02 lb |
We give each product’s specs as its manufacturer rates them; listings read 3 November 2026. Hardening times are the listed times under the listed lamp; a resin sold without a lamp needs a UV lamp of the listed power.
What the listings tell you, and what they leave out
Five UV resin listings were read for this guide. Two are 300g of resin alone, two are 200g kits with a lamp, and one is a 30g bonding kit with a flashlight. Four state a low odor formula, two state a 90-day warranty, and one states REACH compliance with a Safety Data Sheet. Two kits state an 8-bead lamp, and one states a hardening time of 5 to 10 seconds.
Buying guide: the best uv resin for crafts
Resin alone or a kit
A kit includes the lamp, so the work starts at once: two kits here pair 200g of resin with an 8-bead lamp. A resin alone suits a maker who already owns a lamp, and the 300g bottles here give more resin for larger work. Check the listing for what is in the box before ordering.
Hardening time and lamp power
Hardening times here run from 5 to 10 seconds for the bonding kit to 1 to 3 minutes for the larger resins. The kits state lamp power of 12W on one lamp, and the resin alone names a 36W lamp for its 1 to 3 minute time. A stronger lamp hardens the resin faster, as one listing states.
Hardness and shrinkage
One listing states a hardness of up to 85D and shrinkage below 2%, with a viscosity of 2000cps. The rest state no hardness or shrinkage figures, so compare the listed figures where they exist and the maker’s words where they do not.
Odor, yellowing and bubbles
Four listings state a low odor formula, and four state resistance to yellowing. One listing states less bubble with a defoaming formula, and two state a self-leveling and self-degassing build. Keep the surface clean and dry when bonding, as the listings advise.
What about a warranty
Two listings state a manufacture warranty for 90 days from the date of purchase. One kit states no warranty, and the rest state no warranty term, so read the listing before ordering if after-sale cover matters.
For the difference between printing resin and craft resin, see 3D printing resin vs UV resin.
UV resin hardens under ultraviolet light, so wear the nitrile gloves one kit includes and keep the resin off skin. One listing warns not to touch the work until it has hardened and cooled, to avoid burns and fingerprints. Work with ventilation and keep UV light away from eyes.
Project Match
- Jewelry, earrings, necklaces and keychains: the 200g kits with a lamp, with low shrinkage and hardness up to 85D on one kit.
- Small castings, ornaments and domes: the 300g resins, crystal clear and hard after hardening.
- Bonding glass, metal and plastic: the 30g bonding kit with a flashlight, hardening in 5 to 10 seconds.
- Molds with mica powder, colorants, glitter and sequins: the 300g resin that lists mixing with mica powder and colorants.
How the scores add up
Each resin is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A stated safety feature earns safety points, and a concrete warranty term earns warranty points. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| LET’S RESIN 200g Kit | 9.6 | 30 | 21 | 21 | 3 | 2 |
| YIEHO 300g Resin | 9.5 | 29 | 21 | 20 | 4 | 0 |
| KISREL 300g Resin | 9.5 | 29 | 20 | 21 | 3 | 0 |
| KISREL 200g Kit | 9.5 | 28 | 20 | 20 | 3 | 0 |
| LET’S RESIN Bond 30g | 9.4 | 26 | 19 | 18 | 0 | 2 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What is UV resin?
UV resin is a liquid resin that hardens under ultraviolet light, with no mixing needed, as the listings state. It hardens hard and clear for jewelry, keychains, castings and ornaments.
Does UV resin need UV light to harden?
Yes. UV resin hardens only under ultraviolet light, as the listings state, so a UV lamp or flashlight is needed. Two kits here include a lamp, and the resin alone needs a lamp of the listed power.
How much UV resin do you need?
The listings here run from a 30g bonding kit to 200g kits and 300g bottles. A 30g kit suits small bonding jobs, a 200g kit suits jewelry and keychains, and a 300g bottle suits larger castings and more pieces.
How long does UV resin take to harden?
The bonding kit hardens in 5 to 10 seconds under its flashlight, and the larger resins harden in 1 to 3 minutes under a UV lamp, as the listings state.
Related: the 3D printers hub, 3D printing resin vs UV resin and the craft machines hub.




