Best Isopropyl Alcohol for 3D Printing (2026): 5 Picks Compared
5 isopropyl alcohol bottles for washing resin prints, compared by purity, grade, pack size and dispenser.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFive Star 1 Gallon9.7/10View on Amazon - 2
Best Bulk PackMAXTITE 4-Pack9.7/10View on Amazon - 3
Best with SprayerMAXTITE Spray 32oz9.6/10View on Amazon - 4
Best Single BottleForPro 32oz9.6/10View on Amazon
A resin print comes off the build plate dripping and tacky, and the wash bath is the step that turns it into a part worth keeping. The right solvent lifts the wet resin without clouding the surface, and the wrong bottle leaves a sticky film. A best isopropyl alcohol for 3d printing pick is the bottle that keeps the wash bath fresh, so prints come out clean and ready for the next step.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Five Star 1 Gallon: 99.9% USP grade IPA in a 1 gallon pack with no water added, made in the USA. Check price on Amazon
- Best Bulk Pack MAXTITE 4-Pack: 99.9% technical grade IPA in 4 bottles of 32 fl oz, for external use. Check price on Amazon
- Best with Sprayer MAXTITE Spray 32oz: 99.9% IPA in a 32 fl oz bottle with a heavy-duty adjustable spray nozzle. Check price on Amazon
- Best Single Bottle ForPro 32oz: 99% pure IPA in a 32 oz bottle, unscented and made in the USA. Check price on Amazon
Machines on the list

99.9% Pure Isopropyl Alcohol
A 1 gallon pack of 99.9% USP grade isopropyl alcohol with no water added, made in the USA for industrial and laboratory use.
Pros
- 99.9% purity with no water added
- USP grade
- 1 gallon, 128 fl oz pack
- Made in the USA
Cons
- No dispenser or sprayer stated
- No handling warnings stated
- No warranty term stated
- Heavy at 7.0 pounds

MaxTite Isopropyl Alcohol 99.9%
Technical grade 99.9% isopropyl alcohol in 4 bottles of 32 fl oz, with CAS number 67-63-0, for external use.
Pros
- 99.9% purity, technical grade
- 4 bottles of 32 fl oz
- CAS number 67-63-0 stated
- Packaged in 32 oz bottles
Cons
- No dispenser or sprayer stated
- No warranty term stated
- No safety warnings stated

MAXTITE 99.9% Isopropyl Alcohol (32 fl oz)
A 32 fl oz bottle of 99.9% isopropyl alcohol with a heavy-duty adjustable spray nozzle, made in the USA for cleaning electronics and surfaces.
Pros
- Heavy-duty spray nozzle with mist or jet stream
- 99.9% pure, residue-free formula
- Cleans circuit boards and hard surfaces
- Made in the USA
Cons
- Single 32 fl oz bottle
- No warranty term stated
- No safety warnings stated
- Spray nozzle suits surfaces, not a wash bath

ForPro 99% Isopropyl Alcohol (IPA), 32oz
A 32 oz bottle of 99% pure isopropyl alcohol, unscented and made in the USA, for wiping surfaces clean.
Pros
- 99% pure with no inert ingredients like methanol
- Unscented
- Made in the USA
- Spray and wipe dry for surface cleaning
Cons
- 99% purity, below the 99.9% picks
- No dispenser stated
- No warranty term stated
- No safety warnings stated

Amazon Basics 99% Isopropyl Alcohol For Technical
A 16 fl oz bottle of 99% isopropyl alcohol for technical use, with stated handling warnings and a 0.89 pound pack weight.
Pros
- 99% isopropyl alcohol for technical use
- States gloves, clothing, eye and face protection
- Warns vapors may ignite near a heat source
- Small bottle suits a small wash station
Cons
- Smallest volume in this roundup at 16 fl oz
- Not intended for use on the skin
- No warranty term stated
- No dispenser stated
Other machines to compare
MaxTite Isopropyl Alcohol 99.9%Check price on Amazon
Nanoskin 99.9% Isopropyl Alcohol for Laboratory UseCheck price on Amazon
Nanoskin 99.9% Isopropyl Alcohol for Industrial & LaboratoryCheck price on Amazon
Nanoskin Isopropyl Alcohol 99.9% IPA SolventCheck price on Amazon
Specs compared
| Model | HQ Score | Purity | Grade | Pack | Dispenser | Made in USA | Warranty |
|---|---|---|---|---|---|---|---|
| Five Star 1 Gallon | 9.7/10 | 99.9% | USP Grade | 1 gallon, 128 fl oz | Not stated | Yes | Not stated |
| MAXTITE 4-Pack | 9.7/10 | 99.9% | Technical Grade | 4 x 32 fl oz | Bottle | Not stated | Not stated |
| MAXTITE Spray 32oz | 9.6/10 | 99.9% | Technical Grade | 32 fl oz | Heavy-duty spray nozzle | Yes | Not stated |
| ForPro 32oz | 9.6/10 | 99% | Not stated | 32 oz | Not stated | Yes | Not stated |
| Amazon Basics 16oz | 9.5/10 | 99% | Technical Use | 16 fl oz | Bottle | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings do not say about resin washing
We read 5 isopropyl alcohol listings. None of the 5 mentions resin printing or wash stations, so the use case comes from the buyer, not the listing. Purity runs from 99% to 99.9%, and 3 of the 5 listings state 99.9%. Pack sizes run from 16 fl oz to 1 gallon, and only 1 of the 5 includes a sprayer.
What to look for in a best isopropyl alcohol for 3d printing
Purity: 99% or 99.9%
3 of the 5 listings state 99.9% purity, while the Amazon Basics and ForPro listings state 99%. The FIVE STAR listing adds USP grade and no water added, and the ForPro listing states no inert ingredients like methanol. For a wash bath, higher purity leaves less behind on the print.
Pack size and the wash bath
Pack sizes here run from 16 fl oz to 1 gallon. A 16 fl oz bottle suits a first wash station, a 32 fl oz bottle suits topping up, and a 1 gallon pack suits a shop that washes prints often. The MAXTITE 4-pack splits the gallon across 4 bottles of 32 fl oz.
Dispenser: pour or spray
Only the MAXTITE spray bottle includes a dispenser, a heavy-duty nozzle that switches between mist and jet stream. The other 4 listings state no dispenser, so a wash bath needs a separate container.
Handling and storage
The Amazon Basics listing carries the clearest warnings: wear protective gloves, clothing, eye protection and face protection, do not eat, drink or smoke while using it, and keep it away from heat, since vapors may ignite. Store every bottle away from heat sources, and vent the work area while washing prints.
Isopropyl alcohol vapors may ignite near a heat source, and the Amazon Basics listing warns the bottle may explode if exposed to heat. Do not use it as a fuel source. Wear protective gloves, clothing, eye protection and face protection, wash skin thoroughly after handling, and never use it on skin. Vent the work area and keep bottles away from heat.
Project Match
- Washing resin prints in a wash bath: the 1 gallon FIVE STAR pack and the MAXTITE 4-pack suit the largest volumes.
- Topping up a wash station: the ForPro 32 oz bottle and the MAXTITE 32 fl oz spray bottle suit smaller top-ups.
- Spraying surfaces and circuit boards: the MAXTITE spray bottle has the heavy-duty nozzle.
- A first wash station: the Amazon Basics 16 fl oz bottle suits a small start with clear handling warnings.
- Surface wiping between prints: the ForPro listing states spray and wipe dry for surfaces.
How the scores add up
Each bottle is scored on performance, build, value, safety and warranty. How we pick explains the weights. None of the 5 listings states a safety certification or a warranty term, so all score zero on safety and on warranty.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Five Star 1 Gallon | 9.7 | 32 | 21 | 22 | n/a | 0 |
| MAXTITE 4-Pack | 9.7 | 32 | 21 | 21 | n/a | 0 |
| MAXTITE Spray 32oz | 9.6 | 30 | 21 | 20 | n/a | 0 |
| ForPro 32oz | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Amazon Basics 16oz | 9.5 | 28 | 19 | 18 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What purity of isopropyl alcohol do I need for 3D printing?
Look for 99% or 99.9%: 3 of the 5 listings here state 99.9%, and the other 2 state 99%. The FIVE STAR listing adds USP grade with no water added.
Can I use 99% isopropyl alcohol to wash resin prints?
Yes. The listings here are 99% or 99.9% isopropyl alcohol, and resin washing is the use case for this guide. None of the listings names resin washing directly, so match the purity and pack size to the wash bath.
How much isopropyl alcohol does a wash station need?
It depends on the bath: the packs here run from 16 fl oz to 1 gallon. A 1 gallon pack suits a shop that washes prints often, while a 16 fl oz bottle suits a first wash station.
Is isopropyl alcohol flammable?
Yes. The Amazon Basics listing warns that vapors may ignite if exposed to a heat source, and states not to use it as a fuel source. Keep bottles away from heat and vent the work area.
Does isopropyl alcohol expire?
Not stated. None of the 5 listings gives a shelf life, so check the bottle on arrival and store it sealed away from heat.
Related: our 3D printers hub, the 3D printer accessories and the laser cutter vs 3D printer guide.




